Carbon black=40%
Carrier=lldpe
Density: 1174kg/cbm
Melting flow index: 9.1g/10min
Melting point: 110
Moisture content: < 0.2%
Appearance: black granule
Grain diameter: 3micron
Recommend dosage: 1-4% subjected to the final products requirements.
Compatibility:
Ldpe.Hdpe.Pvc.Pp.Po.As.Abs
Application:
The black masterbatch is designed for blown-film, injection-moulding, extrusion¡-plastic application.
Storage:
Stored at dry, cool and under shelter place.
Packing:
25kgs per bag. Plastic pe bag or paper bag.
Remarks : our company has specialised equipment to remove iron filings, all the products can be remove second-class iron filings according to customer requests. Above data shown are for technical guidance purposes without any obligation, users are advised to test the product to confirm final suitability before use.
25kg/bag in pe paper bag/plastic bag, and 25-27t can be loaded in the 20' container without pallet
Appearance: white granule
Light fastness:< 5
Migration< 4
Grain diameter: 3micron
Recommend dosage: 1-4% subjected to the final products requirements.
Compatibility:
Ldpe.Hdpe.Lldpe.Pp.Po.As.Abs
Application:
The white masterbatch is designed for blown-film, injection-moulding, extrusion -plastic application.
Storage:
Stored at dry, cool and under shelter place.
Packing:
25kgs per bag.Plastic pe bag or paper bag.
Remarks : above data shown are for technical guidance purposes without any obligation, users are advised to test the product to confirm final suitability before use.
25kg/bag in pe paper bag/pe plastic bag. And 25t-27t can be loaded in the 20' container without pallet
348 Masterbatch Suppliers
Short on time? Let Masterbatch sellers contact you.
Application:
The blue masterbatch is designed for blown-film, injection-moulding, extrusion¡-plastic application.
Storage:
Stored at dry, cool and under shelter place.
Packing:
25kgs per bag. Plastic pe bag or paper bag.
Remarks : our company has specialised color-matching center to design the specification and color according to international pantone. Above data shown are for technical guidance purposes without any obligation, users are advised to test the product to confirm final suitability before use.
25kg/bag in pe paper bag/pe plastic bag, and 25t-27t can be loaded in 20'container without pallet.
Ldpe caco3 filler masterbatch for pe shopping bag. We are exporters of high reputation and have been for many years in the chemical line. So we are in a good position to serve our customers with the most reliable quality of the line you suggested. The products have good dispersing and heat resistance, also we can make the special goods under your requirements.
Detailed description
Advantages:
1.High concentration pigment with bright colors.
2.More uniform and thinner pigment particle.
3.Much better dispersity
4.Much better compatibility of masterbatches with the raw material than normal masterbatch
5.High quality brings customers low wastage and cost
The primary function of this VCI Master-Batch additive is to provide anti-corrosion properties in PE film.VCI paper and all materials of VCI products,. for protection all ferrous or non-ferrous metals.
High quality pigments made by well-known manufacturers in Europe, US, Japan, conforming to the safely regulations prescribed for 91/155 EC, US and Japans standards, safety data complying with national standards.
General:
Rustoper (corrosion terminator) VCI resin, a base material used for producing VCI plastic film (a kind of functional plastic film which can be applied to the packing and antirust of ferrous and nonferrous metals), is a functional resin concentrated and refined from PE, compound VCI and multi additives with specific processing technology.
Feature/Advantages:
1. The VCI plastic film with excellent performance can be produced with a small amount of such resin added to the formulation, which is of high cost performance.
2. The resin is easy to operate and is extensively applicable to equipment and materials in selection.
3. The resin passes SGS certification and meets RoHS directives.
Applicable Metals:
The VCI resin is applicable to ferrous metal, alloy steel, cast iron, copper, brass, bronze, plated metal, zinc and its alloy, chrome and its alloy, cadmium and its alloy, nickel and its alloy, tin and its alloy, aluminum and its alloy, and other metal materials and their products.
Application Method:
1. Weigh and take respectively the resin and new PE granules according to the established formulation proportion, then mix them evenly and feed them for film blowing production
2. Set the temperatures for the fusion range and mould head range of a blow molding machine according to the requirements, otherwise they will have effects on the quality of VCI film.
3. If it is necessary to produce colored VCI film, control the addition amount of the colored resin granules in the range of the established proportion and its PH value shall be neutral.
4. Seal again the original packaging in time after taking the resin granules to avoid its being affected with damp.
Custody and Storage:
With sealed package, it shall be kept in a cool, dry place, away from sunshine and no contact with sources of ignition and corrosive materials. The quality guarantee period shall be twelve months from the date of delivery.
Silicone powders lysi-100 is our new product of ultra-high molecular weight (uhmw) silicone plastic additives without any resin carrier. It overcomes the weakness of traditional silicone oil as the plastic additives. And it has a large silicone content, ultra- high molecular weight, no precipitation, not slipping in the screw extruder and so on.
Typical performance:
Name : lysi-100
Appearance: white powder
Silicone content: 70%
Dosage: 0.5-2%
Features:
Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling and reduce product defect rate
Obvious lower the coefficient of friction, improve surface smoothness, enhance the surface silk texture f+¼a+ scratch and abrasion resistance.
Enhanced fuel resistance, reduced smoke density, improve the impact strength and surface gloss of fuel resistance (high filling) materials
Good stability, non-migratory and surface without precipitation.
Typical applications:
Modification of plastics, cable materials, elastomers, thin-walled complicated parts, silicone core pipe and so on.
For pa , pc, pps high temperature engineering plastics, can improve the flow of the resin and processing properties, promote the crystallization of pa, improve the surface smoothness and impact strength. .
Use methods:
Lysi-100 mixed with the resin at a certain proportion, then molding or pelleting directly.
Recommend dosage: when added at 0.5%to 2%, can improve the productf+s processing, liquidity and mold release. At a high level: 1% to 5% can improve the surface properties (smoothness, finish, scratch resistance and abrasion resistance).
Silicone masterbatch lysi-07 is our new product which dispersed in pa6 with ultra-high molecular weight (uhmw) silicone content. It overcomes the weakness of traditional silicone oil as the additives, and it has large silicone content, ultra-high molecular weight, no precipitation and not slipping in the screw extruder and so on.
Typical performance:
Features:
Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling mold release and reduce product defect rate
Obvious lower the coefficient of friction, improve surface smoothness, enhance the surface silk texture, scratch resistance and abrasion resistance.
Enhanced fuel resistance, reduced smoke density, improve the impact strength.
Lower surface energy and improve the hydrophobic properties.
Good stability, non-migratory and surface without precipitation.
Applications:
Pa series materials ( to improve flow ability, mold release, floating fiber )
Use methods:
Drying the lysi-07 at 80-120fª about 4 to 5 hours, mixed with pa equally, then injection or extrude it to pellet. Or mix the lysi-07 and pa resin first, then molding after dried.
Recommend dosage: when added at 0.5%to 2%, can improve the productf+s processing, liquidity and mold release. At a high level: 1% to 10% can improve the surface properties (smoothness, finish, scratch resistance and abrasion resistance). Added level at 2% to 5% is effective to improve the abrasion resistance, abrasion reduction to 30% to 80%
The product is a high molecular weight polymer which independently developed by our company with special arts and crafts, adding a small amount to the thermoplastic can significantly improve the productf+s abrasion resistance and reduce the coefficient of the fraction. At the same time, the flow ability of resin, processing performance and surface glossiness are improved as well.
Features:
1.Cost-effective, small amount addition, outstanding abrasion resistance properties
The product produced with special arts / crafts and high technology. On the todayf+s market, 2~3% addition of our products can achieve the same level as the 5~10% addition of traditional agents. Even if the customer has a near-stringent requirements of abrasion resistance, our products can help you to meet their needs. With our products, whether your product are used in running shoes, basketball shoes or the various professional sports shoes , you do not need to worry about the wearness.
2. Environmental protection
This product doesnf+t contain lead, mercury, chromium and other heavy metals, it is fully in line with eu sgs certification requirements. At the same time, it is has good thermal stabilities, no smoke produced during the processing. Especially suitable for the customers who have requirements of environmental protection.
3. Will not change the productf+s hardness
The hardness always increased after the traditional abrasion agents added, easily make the folding resistance decreased. While our product doesnf+t affect the basic mechanical properties of the original product.
4. No affect on color
Other homemade abrasive products often make the color darner, even to black. Seriously affect the appearance of the product. But our product is a high molecular polymer which is very stable under high or low temperature and will not affect the original color during processing.
Silicone masterbatch lysi-06 is our new product which dispersed in pp with ultra-high molecular weight (uhmw) silicone content. It overcomes the weakness of traditional silicone oil easily to screw slip. A small amount addition can improve the flow of the resin and processing properties. Now it is widely used to improve the lubricity and surface properties of plastic.
Typical performance:
Name: lysi-06
Appearance: white pellet
Silicone content: %50
Resin: pp
Dosage: %0.5-10
Features:
Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling and reduce product defect rate
Obvious lower the coefficient of friction, improve surface smoothness, gloss·+ enhance the surface silk texture, scratch and abrasion resistance.
Enhanced fuel resistance, reduced smoke density, improve the impact strength .
Good stability, non-migratory and surface without precipitation.
Applications:
(1) Pp packaging film
(2) Automobile interior trim materials pp/talcf=tpo ( to improve scratch resistance and surface properties )
(3) Bopp, cpp films
Use methods:
Lysi-06 mixed with its compatible resin at a certain proportion then molding or pelleting directly
Recommend dosage: when added at 0.5%to 2%, can improve the productf+s processing, liquidity and mold release. At a high level: 1% to 5% can improve the surface properties (smoothness, scratch resistance and abrasion resistance).
Silicone masterbatch lysi-08 is our new product which dispersed in pet with ultra-high molecular weight (uhmw) silicone content. Compared with traditional silicone additives, processing and weighing are more convenient, improving the appearance and surface properties are more obvious and the impact on the printing and coating are much smaller.
Features:
Add a small amount (0.3%f¼2%), can enhance the flow of the pet and processing properties, better mold filling, less extruder torque, mold release and faster throughput; addition level at 1% to 5%, can further improve the surface properties and appearance of the products. Including lubricity, lower coefficient of fraction, better abrasion and scratch resistance. Reduce the surface energy consumption, improve the hydrophobic and anti-sticky properties.
Application examples
For bopet film with excellent smoothness under high temperature, and do not precipitate.
For pet sheet to improve processing, appearance, scratch resistance and anti-adhesion properties
For wire-drawing industry, to improve the appearance and feeling of wire-drawing, reduce breakage, improve abrasion resistance, lower surface energy and improve the hydrophobic properties
For pet injection molding, to enhance the flow of the product, improve the product surface smoothness, abrasion resistance, scratch resistance, faster throughput and appearance.
How to use:
Lysi-08 mixed with pet equally. Drying it under 110-150f¦ before use. Or dried lysi-08 mixed with dried pet equally first, than extrusion or molding.
Packaging and storage
The product is a non-dangerous good, paper bag, 25kg/bag, avoid high temperature and rain when storage. The usable life is 48 months from the date of production under the cool room temperature.
Keysun vci master-batch is a nitrite-free anti-corrosion master-batch designed for both ferrous and most of the non-ferrous metals. The vci (volatile corrosion inhibitor) additives in keysun-vcimb-2100 are partly based on chemicals with enough energy (vapor pressure) to release the active anticorrosion molecules from the film and out in the environmental air to protect the metal packed from corrosion. Extrusion of polyethylene film with sp-vcimb-2001 will produce a finished product that combines the properties of polyethylene resin and the vci which will solve the corrosion problems. It is available with color pigment as well as without color pigment. Without color pigment master-batch, the film will give transparent bluish-green color film
