This product is small type double drum hydraulic vibratory roller. Applied to mending maintaining various roads, expressway shoulder, side work, parking area, playground and garden lawn. Especially suitable for compact wayside, pipeline channel and drainage trench and all kinds of grooves backfill.
FEATURES
1. Hydraulic vibrating and steering, Back drive. Adopts Changchai 3 cylinder water-cooling diesel engine, excellent power output.
2. Adopts side gear transmission, less power loss and more efficient.
3. Clamp-type frame is better for fit edge, fit edge height is more than 60cm, higher than road shoulders.
4. Upgrade to oil brake and use new gearbox is more efficient and faster speed.
MAIN PERFORMANCE PARAMETRES
ã??MODEL KYL-Z1090C
ã??Operating Mass 3000kg
ã??Exciting Force 35kn
ã??Vibration Frequency 45 Hz
ã??Drum Width/Diameter 1090/780mm
ã??Static Linear Load 120/153N/cm
ã??Travel Speed 2.4/10km/h
ã??Gradeability 20%
ã??Minimum turning radius 3500 mm
ã??Wheelbase 2150mm
ã??Min. ground clearance 170mm
Diesel/ Hydraulic tank capacity 60/60L
ã??Diesel Model ZN385
CF3B35G/ZN390B
ã??Diesel Power 21ï¼?25.8/26.5ï¼?kw
ã??Dimension(LÃ?WÃ?H) 3000x1300x2400mm
Product Application
KYL-Z900Q is 1 ton roller has compact appearance, can used for narrow area. Mainly used for soil, asphalt, and sand compaction. New construction and repair work for road construction projects, such as school, playground, and highway repair.
Features:
1Adopts imported variable piston pump drives the roller stepless speed walking, infinitely variable speed;
2Double drums hydraulic driving and steering, hydraulic vibration is driven by imported motor;
3 Engine optional: air cooled diesel engine, Honda gasoline engine;
4 Operate radius small, can work in small area, suitable for groove backfill;
5International NSK bearing, MITSUBOSHI triangle belt, Eaton steering gear;
6Surface spray, beautiful appearance, rust resistant.
Technical Parameter
Model KYL-Z900Q
Walk Speed 0-8.0km/h Water Tank 100L
Gradeability 30% Hydraulic Oil Tank 60L
Drive Type Hydraulic Double Drive Engine Model CF192F
Vibration Type Hydraulic Vibration Power 10.0HP
Static Linear Control 56N/cm Steel Wheel Size Φ560mm* 900mm*2
Nominal Amplitude 0.6mm Package Size 2300*1250*1700mm
Vibration Frequency 70Hz Net Weight 1500kg
Exciting Force 30KN Starting Mode Electric
KYL-450 is 200kg hand push single drum vibratory road roller, mainly used for narrow place compaction, soil and asphalt pavement; road maintenance and construction.
Such as highway construction of culvert, channel into the edge, corner of the compaction of asphalt concrete, bridge abutment backfill structures, large roller compaction cannot work area.
Main Features
1).Operating radius is small, can work in a small area; hand push road roller
2).HONDA gasoline, quality assurance, superior performance, easy to start;
3).Surface spray, beautiful appearance, rust resistant, reversing conveniently, long lifetime.
Model KYL-450
Walk Speed 0-3km/h Water Tank 20L
Gradeability 30% Hydraulic Oil Tank 0L
Drive Type Hand push type Engine Model Honda GX160
Vibration Control Automatic Clutch Power 5.5HP
Static Linear Load 40N/cm Steel Wheel Size 425*450mm
Nominal Amplitude 0.6mm Package Size 750*750*900mm
Vibration Frequency 70Hz Working Weight 200kg
Exciting Force 15KN Starting Mode Recoil
Road Roller KYL-600C is one kind of small-size Road Roller, adopts famous Air cooled engine , the engine is optional, the power is 5.5HP, it adopts hydraulic station,ensure the compaction performance of the whole machine and gradeability, our Vibratory Roller has hand and electric start, small operating radius, can work in a small area, the mini road roller is mainly used for compact asphalt, broken stone, backfill and concrete etc. The packaging of the Roller is wooden case or according to customers' requirements.
Main Features
1.Operating radius is small, can work in a small area.
2.Domestic famous water-cooled diesel engine, quality assurance, superior performance, easy to start.
3. The use of famous brand hydraulic drive unit, convenient to reverse, long lifetime, reversing convenient.
4. Handrails using plane gear adjusting mechanism, flexible, can adapt to different height workers to operate.
5. Adopt international famous NSK bearing MITSUBOSHI v-belt, to ensure the work performance of the machine.
6. Diesel power which electric startup, light and flexible.
7. Beautiful appearance, rust resistant.
Technical Parameter
Model KYL-600C
Walk Speed 0-3.0km/h Water Tank 17L
Gradeability 30% Hydraulic Oil Tank 19L
Drive Type Hydraulic Station Engine Model CF170F
Vibration Type Automatic Clutch Power 5.50HP
Static Linear Control 40N/cm Steel Wheel Size Φ425mm* 600mm 轮宽
Nominal Amplitude 0.6mm Package Size 1100*1000*1200mm
Vibration Frequency 70Hz Net Weight 320kg
Exciting Force 15KN Starting Mode Hand or Electric
Road Roller KYL-S600C is one kind of small-size Road Roller, adopts famous Air cooled engine , the engine is optional, the power is 7HP, it adopts hydraulic station, double drum driving and vibration, ensure the compaction performance of the whole machine and gradeability, our Vibratory Roller has hand and electric start, small operating radius, can work in a small area, the mini road roller is mainly used for compact asphalt, broken stone, backfill and concrete etc. The packaging of the Roller is wooden case or according to customers' requirements.
Main Features
1.Operating radius is small, can work in a small area.
2.Domestic famous water-cooled diesel engine, quality assurance, superior performance, easy to start.
3. The use of famous brand hydraulic drive unit, convenient to reverse, long lifetime, reversing convenient.
4. Handrails using plane gear adjusting mechanism, flexible, can adapt to different height workers to operate.
5. Adopt international famous NSK bearing MITSUBOSHI v-belt, to ensure the work performance of the machine.
6. Diesel power which electric startup, light and flexible.
7. Beautiful appearance, rust resistant.
Technical Parameter
Model KYL-S600C
Walk Speed 0-4.0km/h Water Tank 20L
Gradeability 30% Hydraulic Oil Tank 21L
Drive Type Hydraulic Station Engine Model CF178F
Vibration Type Automatic Clutch Power 7.0HP
Static Linear Control 53N/cm Steel Wheel Size Φ425mm* 600mm*2
Nominal Amplitude 0.5mm Package Size 1450*1100*1200mm
Vibration Frequency 70Hz Net Weight 550kg
Exciting Force 20KN Starting Mode Hand or Electric
757 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
1. Applications of XY-200 hydraulic core drilling rig
Geological survey, geophysical exploration, road and high-rise building foundation exploration, wells, blasting holes and other drilling projects.
2. Parameters of XY-200 hydraulic core drilling rig
Maximum opening diameter 400mm
Maximum borehole depth 200m
Diameter of the end hole 75mm
Borehole dip angle 90-75°
Machine overall size 2.75*0.95*1.60m
Drill pipe diameter 50mm
Weight of drill rig diameter of drill pipe (without power) 760kg
1. Characteristics of XYD-3 crawler hydraulic core drilling rig
XYD-3 crawler hydraulic core drilling rig is mainly used for geological general investigation and exploration,road and tall building foundation exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole drilling and direct grouting,civil wells and earth temperature central air-conditioner,ect.
·The drilling rig is equipped with crawler chassis device, which is easy to move with fast speed.
·The crawler device is made of resistant steel mill.
·Hydraulic oil pressure feed device, which improves drilling efficiency.
·Pressure gauge displays the condition of the bottom of the drill hole.
·Drill mast controlled by hydraulic cyliner so it improves the efficiency.
·Diesel engine adopts the electric starter to reduce the labor usage.
2. Parameters of XYD-3 crawler hydraulic core drilling rig
Drilling depth 600m
Max. open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90°-75°
Spindle
Spindle forward speed 30-1050r/min
Spindle reverse speed 29-137r/min
Spindle stroke 600mm
Spindle inner diameter 96mm
Main Winch
Single line lifting speed 0.5/0.9/1.4/1.9m/s
Diameter of wire rope 12.5mm
Brake width 90mm
Drum diameter 300mm
The biggest single rope hoisting capacity 30kn
Mud pump
Type Horizontal triples BW-250 Mud Pump
Displacement 250 l/min
Water inlet diameter 75mm
Water outlet diameter 50mm
Power
Diesel engine 38kw
Electric motor Y180L4 22KW
Weight 6500kg
Size 2500*900*1800mm
1.Features of XYC-3 vehicle-mounted hydraulic core drilling rig
XYC-3 is a vehicle-mounted hydraulic core drilling rig.The drilling rig transmission system and hoist, mud pump and other important accessories are all installed on the chassis. The layout is reasonable and compact. And the operation is simple.
The drilling rig is equipped with high pressure and large flow BW-250 pump, which ensures the drilling depth and borehole diameter.
2. Applications of XYC-3 vehicle-mounted hydraulic core drilling rig
·geological survey and exploration
·road and high-rise building foundation exploration
·all kinds of concrete structure inspection holes
·river embankments
·subgrade grouting holes
·drilling and direct grouting
·civil use water wells
·ground temperature central air conditioners
3. Parameters of XYC-3 vehicle-mounted hydraulic core drilling rig
XYC-3 vehicle-mounted hydraulic core drilling rig
Drilling depth 30-600
Drill hole diameter 300-75
Diameter of the end hole 75
Drill angle 90-75
Spindle forward core speed 30-1050
Spindle reverse core speed 29-137
Spindle stroke 600
Main winch lifting force
(with single line) 3000
Main winch rope capacity 65
Lifting speed 0.3-1.9
Rope diameter 12.5
Drill mast height 7000
Drill effective height 6500
Driving drilling rod 59*53ã??70*63ã??79*89
Drilling rod diameter 42/50/60
Weight 3500
Engine Model:Yunnei YN27
1. Brief introductions of QTZ-1 soil sampling drilling rig
QTZ-1 soil sampling drilling rig is comparable to a huge hydraulic and pneumatic drilling rig. The drilling rig is a dynamic gasoline driller used for soil sampling, The rig uses gasoline power and is simple in operation. The rig is safe and stable in performance. It can greatly reduce the labor force, taking into account the rapid and simple sampling speed.
2.Applications of QTZ-1 soil sampling drilling rig
·Geotechnical engineering investigation,environmental soil survey,agricultural soil survey.
·Groundwater survey,coastal geological survey,wetland environment investigation.
·Tailing pond investigation, archaeological investigation, physical chemistry and secondary halo sampling.
3. Technical parameters of QTZ-1 soil sampling drilling rig
QTZ-1 soil sampling drilling rig
Power power 2.8hp
fire mode backflush pull rope
oil consumption 0.5l/h
Impact times 1500r /min
Impact energy 20J-55J
Core depth 5m-10m
Host weight 23kg
1.Brief introductions of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig is modified and designed on the basis of SH30 exploration drilling rig. The exploration drilling rig can be used for the covering layer of fourth Century, such as soil, clay, sand and gravel, and all kinds of mixed soil and fill. It is mainly used in the exploration of gold sand, industrial buildings and civil buildings as well as highway, railway, bridge and other engineering geological prospecting work.
2.Features of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig is simple operate and has high degrees of mechanization. With light weight, compact structure, good disintegration performance and convenient handling, the SH30-2A exploration drilling rig can be removable in the mountain area and is equipped with a pair of rubber wheels. The machined can be towed between different drilling holes on constructions site. .
3.Applications of SH30-2A exploration drilling rig
The SH30-2A exploration drilling rig has two kinds of drilling methods: impact and rotation. Therefore, the drilling tools of the drilling machine are divided into two kinds: impact tools and rotary tools. In order to meet the customer's individualized demand, the drilling tools are equipped in accordance with the demand , and the standard configuration does not include the rotary drilling function.
4.Impact tool of SH30-2A exploration drilling rig
The tools used for impact drilling include lifting joints, weighting rods, impact rods, guiding pipes and impact drills. When the soil sample is used, the drilling tool used is the same as above, but only the impact bit is changed into a soil sampler.
Using sand cylinder for sand gravel and other tools are lifting joint, rod, movable joint, sand lifting cylinder. When drilling in sand and pebble layer, casing must be lowered to protect the hole wall and prevent collapse. With complete free chain clamp c
5.Rotary tool (Not include in standard configuration).
Rotary Table, Auger Drilling Pipe, Rotary Table Pipe Adapter,
6.Specifications of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig
Drilling depth 30m
Drilling pipe diameter 42mm
Aperture diameter 142mm
End hole diameter 110mm
Drill form and vertical height 4 legs, 6m
Power
Motor Y132S2-2/ 7.5kw/3000 r/min
Diesel engine D180Z/ 8hp/2400 r/min
Windlass
Lifting speed 0.24/ 0.57/1.48m/s
Maximum lifting power (single rope, low speed) 15kn
Turntable
Diameter 150mm
Turntable speed 18/44/110r/min
Dimension
Length*width*height 1780*1010*900mm
Weight 500kg
1.Features of KY-150 hydraulic exploration drilling rig for metal mine
KY-150 hydraulic exploration drilling rig for metal mine is easy to disassemble and convenient to transport. The drilling rig has flexible arrangement, and the drilling pipe can be dismantled mechanically, which can reduce labor cost and improve work efficiency. Also the rig has infiniTely variable speeds.
KY-150 hydraulic exploration drilling rig for metal mine has the function of linkage. It is simple and safe to control the rig through the operation platform. The spindle of the gyration adopts the through hole structure. The length of the drill pipe is not restricted by the drilling rig, and it can also be applied to diamond wire-line coring drilling.
KY-150 hydraulic exploration drilling rig for metal mine uses full hydraulic operation to make the structure more reasonable to make the function more complete. It uses variable motor which has wide speed regulating range. This drilling rig applies to high speed drilling of alloy steel stone and hard alloy drilling at low speed, and it is suitable for any inclination drilling in the tunnel or surface drilling.
2.Components of KY-150 hydraulic exploration drilling rig for metal mine
The KY-150 hydraulic exploration drilling rig for metal mine adopts the structure of full hydraulic power head, and consists of three parts: main engine, pump station and operating floor.
3.Specifications of KY-150 hydraulic exploration drilling rig for metal mine
Borehole diameter 36.5mm/46.5mm
Drilling depth 150ï¼?Ï?33 steel drill pipeï¼?/120ï¼?Ï?43 steel drill pipeï¼?/150(Ï?43 aluminum alloy drill pipe)
Borehole angle 0°-360°
Spindle speed 400-1400 r/min
Spindle output torque 87-300 n.m
Rated pull force 30 kn
Rated pull speed > 0.3 m/s
Oil supply mode double gear pump
Hydraulic oil mode antiwear hydraulic oil YB-N46/YB-N32 (winter)
Motor model manual variable motor A6V55MA
Motor specifications Y180M-4/18.5 kw
Equipment weight main engine166kg/backbone 40kg/operation floor 86kg/power car 210kg
1.Brief introductions of SJD-2A portable electric water well drilling rig
electric water well drilling rig are widely used in household/factory water wells, irrigation Wells, installation of water air conditioning, construction piling and so on.
The electric water well drilling rig bit produced by the company can be optionally equipped with drill bit, the price of drill bit is calculated separately.It can also be equipped with a drill pipe, with a diameter of 32mm and the length about 1.8m.
2.Features of SJD-2A portable electric water well drilling rig
The whole machine is about 8KG, and it is easy to carry.Power 220V electric ,household two-phase electrical lighting, motor power 1200W or 1500W.The motor can be multi-stage variable speed, positive and negative, and easy to operate.The well drilling depth can reach 50 meters, the wellhead diameter is 50-180mm, the general drill bit 50-180mm, the special specification can be customized.The diameter of the drill pipe is 32mm or 42mm and a length is 1m to 2m.
1.The brief introductions of SJD-2B collapsible electric water well drilling rig
The collapsible electric water well drilling rig is widely used in home / factory water wells, farmland irrigation wells, water and air conditioning, construction pile driving and so on.
2.The specifications of SJD-2B collapsible electric water well drilling rig
·Punching range: 60-250mm;
·Drill pipe diameter: 1.2 inch;
·Drilling depth: 100mm aperture can be 70 meters, 250mm aperture can be30meters.
·Voltage: 220V
·Rotary motor: 4000W;
·Speed: 80r/min, can be positive and reverse;Lifting motor: 1000W;
·The overall size of the whole machine is long 900mm, wide 700mm, high 2200mm (collapsible).
·The weight of the whole machine is 70KG (including drilling frame / rotary motor / lifting motor).
1.The applications of KQZ-180D pneumatic water well drilling rig
KQZ-180D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has the advantages of large diameter, deep drilling, fast track, flexible movement and wide use.
2.The specifications of KQZ-180D pneumatic water well drilling rig
Drilling hole diameter 100-219mm
Drilling depth 150m
Drilling angle ground to 45-90°
Feed stroke 1500mm
Motor power 7.5kw
Rotary speed 0-78rpm
Wind pressure 0.8-2.1mpa
Air consumption 13-21L/min
Gross weight 600kg
1.The features of SPJ-300 water well drilling rig
·SPJ-300 water well drilling rig is powered by electric motors.
·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling.
·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc..
·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device
2.The specifications of SPJ-300 water well drilling rig
Borehole diameter 500mm-1500mm
Drilling depth 300m
Maximum output torque 18kn.m
Active drilling pipe 108*108*12mm
Drilling pipe 89mm
Main windlass lifting power 30kn
Assistantwindlass lifting power 20kn
Rotary table latus rectum 500mm
Rotating speed (forward and inversion) 40/70/128r/min
Height of the drilling tower 13m
Gross weight (excluding drill rod) 9t
External dimension 2200*6000*13000mm
Drilling tower Type A / hydraulic drill tower
This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1. Brief introductions of KQZ-70D pneumatic-electric DTH drilling rig
KQZ-70D pneumatic-electric DTH drilling rig is a new type of high efficient drilling rock equipment designed for water conservancy projects and construction sites. It is widely used for drilling in all kinds of rock strata in open pit, water conservancy and construction slope treatment.
KQZ-70D pneumatic-electric DTH drilling rig is a percussive rotary drilling rig. Its internal structure is different from that of a general jack drill. Its valve train and reciprocating piston mechanism are independent, that is impactor. The front is directly connected to the bit, and the back is connected to the drill pipe. when drilling the rock, the impactor dive the hole. The piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom.
2. Features of KQZ-70D pneumatic-electric DTH drilling rig
Small in size, light in weight, suitable small space that large and medium-sized drilling rig can not work , convenient and flexible.
3.Specifications of KQZ-70D pneumatic-electric DTH drilling rig
KQZ-70D
Borehole diameter mm 50-80
Drilling depth m 10-15
Rotating speed r/min 112
Air consumption m³/min 3.5-4.5
Cylinder diameter mm 90
Drilling pipe mm 42
Motor power kw 3
Main engine length mm 1524
Main engine weight kg 148
1.Brief introductions of KHYD75 electric rock drilling rig
·electric rock drilling rig can be fitted with drilling stand, and can be drilled horizontally or inclined upward.
·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining.
·In drilling operations, we only need to operate the handwheel, and the electric motor rock drilling rig can advance and return quickly.
2.Specifications of KHYD75 electric rock drilling rig
Model Unit KHYD75
Rated output power of electric motor kw 3
Rated voltage of electric motor v 380/660
Rated frequency of electric motor hz 50
Rated current of electric motor a 6.8/3.9
Motor rotating speed r/min 1420
Working mode continuity
Drilling speed mm/min 320
Rig return speed m/min
Borehole diameter mm 42(rockï¼?
Hardness range protodikonov`s scale of hardness f
1.Brief introductions of KHYD110 electric rock drilling rig
·The electric rock drilling rig can be fitted with drill stand, and can be drilled horizontally or upward in any direction.
·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining.
·In the operation of electric motor rock drilling rig, we only need to operate the handwheel, and the electric motor rock drilling rig can advance itself and return quickly.
2.Specifications of KHYD110 electric rock drilling rig
Model Unit KHYD110
Rated output power of motor kw 5.5
Rated voltage of motor v 380/660
Rated frequency of motor hz 50
Rated current of motor a 11.6
Motor speed r/min 1440
Motor phase number three phase communication
Rated working mode continuity
Drilling speed mm/min 280
Speed of return m/min
Borehole diameter mm 42-80ï¼?rockï¼?
Hardness range protodikonov`s scale of hardness f
1.Brief introductions of ZDY-1250 full hydraulic tunnel drilling rig
ZDY-1250 hydraulic tunnel drilling rig is used for coal mine: Z stands for drilling rig; D stands for tunnel; Y stands for hydraulic driven, and 1250 is the maximum output torque of 1250n. m.
2.Applications of ZDY-1250 full hydraulic tunnel drilling rig
ZDY1250 tunnel drilling rig is mainly used for drilling holes of gas pumping (row), grouting hole, water injection hole, anti process and pressure relief hole, geological exploration hole and other engineering drilling holes. Drilling rig can drill holes in the range of azimuth and dip angle specified in the basic parameter table.
3.Specifications of ZDY-1250 full hydraulic tunnel drilling rig
Project Unit ZDY-1250
Maximum drilling depth m 200
Open hole diameter mm Ф87/Ф115
End hole diameter mm Ф65/Ф75
Drilling pipe diameter mm 50
Drilling angle ° -90-+90
Rated output rotating speed r/min 80/170
Rated output torque n.m 1250/600
Rated power kw 22
Rated voltage v 380/660
Rated current a 42.5/24.5
Feeding force kn 60
Pullout force kn 45
Anchorage force kn 4*45
Rated advance speed m/min 0-1.5
Feed stroke mm 850
Hardness range (protodyakonov scale of hardness) fâ?¤10
Noise db(a) â?¤92
Main engine dimension (long*width*high) mm 2240*1000*1478
Total weight (without drill rod) kg 1820
1.Brief introductions of ZLJ350 grouting reinforcement drilling rig
ZLJ350 grouting reinforcement drilling rig is mainly used for grouting reinforcement hole. ZLJ350 grouting reinforcement drilling rig work for under mine, tunnel, subway, slope support. The drilling rig can work different angles of grouting reinforcement and drilling hole.
This drilling rig adopts mechanical drive, hydraulic feed with small size, light weight, The rig is reliable and convenient to operate.
2.Specifications of ZLJ350 grouting reinforcement drillinDrilling Rigg rig
Drilling diameter 50-113mm
Drill rod caliber 42mm
Noncoring bit 50-113mm
Core bit 56-113mm
Vertical rated speed 340 /192/112 r/min
Vertical shaft torque rating 130/ 230 /400 n.m
Main shaft angle 0-360
Spindle stroke 400mm
System pressure rated 8mpn
Feed force 9kn
Elevating power 12kn
Winch lifting capacity 7.35kn
Capacity of drum 26.8m
Diameter of wire rope 8.85mm
Oil pump type YBC-12/80
Motor power 5.5kw
Dimension 1230*630*1280mm
Total weight 430kg
757 Builders Hardware Construction Material Equipment Suppliers
Short on time? Let Builders Hardware Construction Material Equipment sellers contact you.
