Model : NF5280M3
Processor : Support 2 Intel Xeon processors of E5-2600 series
Cache : 10MB, E5-2603, E5-2609
15MB, E5-262 E5-263 E5-2640
20MB, E5-265 E5-266 E5-2665, E5-267 E5-268 E5-2690
QPI bus rate : 6.4GT/s, E5-2603, E5-2609
7.2GT/s, E5-262 E5-263 E5-2640
8.0GT/s, E5-265 E5-266 E5-2665, E5-267 E5-268 E5-2690
Chipset : Intel C600 server chipset
Memory : 24 DIMM, DDR3-1600 up to 512GB (32 GB per DIMM
Support advanced memory ECC, Mirror, sparing.
HDD controller : Integrated SATA controller, optional 8 channel SAS 3Gb/6 Gb disk controller
RAID : Integrated SATA controller supports RAID 0/1/10/5
SAS controller support RAID 0/1/10, optional support RAID 5 50;
Optional support RAID 0/1/5/6/10/50/60, with high performance SAS RAID controller which has cache and cache protection battery
Storage : Up to support 24 pieces of hot-swap 2.5 inch SATA/SAS or SSD
Expansion Slots : 1 PCI-E 3.0 x16 4 PCI-E 3.0 x8
(If only configure 1 processor, 1 PCI-E 3.0 x16 2 PCI-E 3.0 x8 available)
I/O interfaces : Front 2 USB interfaces
Rear 4 USB interfaces 1 standard VGA interface 1 serial interface 2 or 4 RJ45 GbE Ethernet interfaces 1 RJ45 Ethernet interface only for management, optional 2 RJ45 10GbE Ethernet interfaces
Built-in 1 serial interface, 2 USB interfaces
Network controller : Integrated 2 or 4 Gigabit network interfaces; support Virtualization Accelerator, network Accelerator, network redundancy and load balance, and two more optional 10GbE interfaces.
Power Supply : 600W or 700W Power, optional 1+1 Redundant, optional support PMbus Power
Graphics card : Integrated 16MB memory video controller
CD-ROM : 8 or16 bays model with Slim DVD-RW
24 bays model optional with external USB DVD-RW
Floppy Drive : Support optional virtual floppy drive of USB interface which based on flash memory
Management Features : Integrated system management chipset, support IPMI2.0, KVM over IP, virtual media; support Inspur Ruijie series server management and deployment software.
Optional LCD management module, with visual system monitor and fault diagnosis module
OS supported : Microsoft Windows Server 2008 SP1 32/64bit
Windows 2003 Enterprise with SP2 32/64bit
Red Hat Enterprise Linux 5U3 32/64bit,
SuSE Linux Enterprise Server 10 SP2 32/64bit
SuSE Linux Enterprise Server 11 32/64Bit
Operating Temperature : 5
AC input : 110-240V
International Certification : ISO9001 International Quality Management System
ISO14001 International Environment Management System.
CO2 laser power supply, special power CO2 laser, YAG laser welding machine power source, YAG laser cutting machine power, fast-axial flow laser power, Helium-neon laser tube laser power, YAG krypton lamp laser power, laser power supplies, DC UPS, DC - DC converter, xenon lamp power supply, high voltage power supply, laser power accessories, AC voltage source, switching power supply series.
Say "bye, bye cellulite" with the new, improved Celluless MD!
Want to look your best for holiday parties and beyond? Celluless MD is just what the doctor ordered! Declare victory in your battle against cellulite! This new, improved portable vacuum therapy system combines gentle suction and efficient massage rollers to melt away fat and reduce sizes while helping you look and feel your best. It's perfect for all problem areas including thighs, arms, stomach, buns, hips and legs. Comes with large roller cup and a small cup for more delicate areas. Ergonomic design.
1. Principal features
This machine contains 5 temperature zones, the minimum temperature difference between zones confirms good sterilizing effect, and also reduce bottle broken rate.
Hot water is recycled to use in temperature sections in order to save heat energy and reduce water consumption .This machine could process bottled beverage or beer products , which completely conforms to relevant technologic requirements .
2. Principal parameter
Model Plj-3000 Plj-6000 Plj-10000
Production capacity 2000-3000(b/h) 4000-6000(b/h) 8000-10000(b/h)
Bottle inlet temp 5-10ípc
Bottle outlet temp <45ípc
Sterilizing stemp 62-63ípc
Sterilizing unit 15-20pu
Steam pressure 0.5-0.6mpa
Width of beltú¿mú¬ 1.22 1.5 1.5
Circling water(m3/h) 10 20 40
Water consumption 1(m3/h) 1.5(m3/h) 2(m3/h)
Steam consumption 200kg 350kg 600kg
Outer size(mm) 8000íß1500íß1850 1100íß1800íß1850 15600íß1800íß1850
Weight (kg) 4800 7200 9600
947 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
Bottle rinsing machine is used for washing and sterilizing glass bottle in different shape before filling. It can save 20% energy compared with the conventional machine. It is easy to operate.
The HW series dough kneader is the main equipments for food processing, the dough kneader can mix water and flour evenly to make dough. And you can also add some other additives such as edible oil, sugar etc. using the dough kneader can save labors and increase the work efficiency .
The HW series dough kneader has the characters of high applicability, compact structure, good seal, homogeneous mixing, and little noise, less consumption, less manpower, stable running, easy operation, and high efficiency. So These dough kneader is widely used in all kinds of catering units such as guesthouses, hotels, food processing plants etc.
Solar panel: 100wp,monocrystalline silicon component
Battery: 12V/120Ah, fully sealed and maintenance-free lead-acid battery
Controller: 15A,special controller for solar lamps, protection against overcharge and over discharge, light control and time control
Light source: 30W super-illuminated LED
Illumination: 1500Lm
Lamps post: 7m,steel, over striking and thickening, hot galvanization spraying-plastic
Lighting time: fully charged lamps may work 6-10 hours a day (adjustable) and last 3-5 days on-end in cloudy or rainy weather
Applicable temperature:-40íµ-50íµ
Solar battery components: 1.5wp
Light source: multi-color and super-illuminated LED
Battery: 1600mAh Ni-MH, maintenance-free battery
Controller: special controller for solar lamps
Lighting time: 8-10 hours each night, 3-5 days on-end in cloudy or rainy weather
Dimension and material: 500-600mm in height, cast aluminum, spraying-plastic
Features: (optional items:rotary axis), distinctive feature- work table is moving back and forth
1) machine body: whole cast aluminum
2) work dimensions: 300 x 300 x 45mm
3) body dimensions: 600 x 600 x 600mm
4) z-axis working area: 45mm
5) max. Feeding height: 60mm or bigger
6) cut thickness of material: ín20mm
7) max. Speed: 4200mm/min
8) working speed: 0 - 3, 000mm/min
9) mechanical precision: 0.01mm
10) software: type 3 software, artcut software, artcam software
11) max. Power consumption: 900w
12) power source: ac 220/50hz or 110v/60hz
13) driver type: stepper motor
14) spindle: 800w variable speed, water-cooled motor
15) spindle speed: 0 - 24, 000rpm
16) blade diameter: 3.175mm, 4mm, 6mm
17) control system: ncstudio
18) command: g code, u00, mmg, plt
19) relative humidity: 30% - 75%
20)pack dimensions: 750 x 750 x 750mm
21)net weight: 70kg
22)gross weight:90kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing, cu and al molding, mold manufacturing, wood processing, craft manufacturing, light box cutting, building mold cutting, indoor decoration cutting, light equipment mold processing, sign and mark manufacturing, acrylic board processing, as well as stamp cutting and pcb cutting
Pack dimensions: 750 x 750 x 750mm
Net weight: 70kg
Gross weight:90kg
Features:
1) Machine body: whole cast iron
2)Guideway:XYZ-axis use cylindrical guideway
3)Driving mode:ball screw
4) Work dimensions: 600 x 900 x 70mm
5)Body dimensions: 800 x1, 200 x 1,200mm (with bracket)
6) Z-axis working area: 70mm
7) Max. Feeding height: 900mm or bigger
8) Cut thickness of material: í_30mm
9) Max. Speed: 6,000mm/min
10) Working speed: 0 - 5000mm/min
11) Mechanical precision: 0.01mm
12) Software: type 3 software, Artcut software, Artcam software
13) Max. Power consumption: 1.6kW
14) Power source: AC 110/220/50-60Hz
15) Driver type: stepper motor(xyz -sxis use 57BYG motor)
16) Memory: 128MB or without
17) Spindle: 1.5kW variable speed, water-cooled motor
18) Spindle speed: 0 - 24,000rpm
18) Blade diameter: º¦3.175mm, 4mm,6mm
19) Control system: (NCSTUDIO) or DSP (USB interface)
20) Command: G code, u00, mmg, plt
21) Running circumstance temperature: 0 - 45ípC
22) Relative humidity: 30% - 75%
Packing:
Packing dimensions: 900 x 1,350 x 1,300mm
Net weight: 250kg (with bracket)
Gross weight: 330kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing Cutting, Cu and Al molding cutting, mold manufacturing cutting, wood processing cutting, wood door manufacturing cutting, craft manufacturing cutting, light box cutting, building mold cutting, indoor decoration cutting, wave board processing cutting, light equipment molding processing cutting, sign and mark manufacturing cutting, acryl board processing cutting, stamp cutting.
Packing:
Packing dimensions: 900 x 1,350 x 1,300mm
Net weight: 250kg (with bracket)
Gross weight: 330kg
Features: (optional items:Rotary axis)distinctive feature- work table is moving back and forth
1) Machine body: whole cast aluminum
2) Work dimensions: 300 x 300 x 45mm
3) Body dimensions: 600 x 600 x 600mm
4) Z-axis working area: 45mm
5) Max. Feeding height: 600mm or bigger
6) Cut thickness of material: í_20mm
7) Max. Speed: 8000mm/min
8) Working speed: 0 - 6,000mm/min
9) Mechanical precision: 0.01mm
10) Software: type 3 software, Artcut software, Artcam software
11) Max. Power consumption: 900W
12) Power source: AC 220/50Hz or 110V
13) Driver type: stepper motor
14) Spindle: 800W variable speed, water-cooled motor
15) Spindle speed: 0 - 24,000rpm
16) Blade diameter: 3.175mm,4mm,6mm
19) Control system: Ncstudio
20) Command: G code, u00, mmg, plt
21) Relative humidity: 30% - 75%
22)Pack dimensions: 750 x 750 x 750mm
23)Net weight: 90kg
24)Gross weight:110kg
Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing, Cu and AL molding, mold manufacturing, wood processing, craft manufacturing, light box cutting, building mold cutting, indoor decoration cutting, light equipment mold processing, sign and mark manufacturing, acrylic board processing, as well as stamp cutting and PCB cutting
Pack dimensions: 750 x 750 x 750mm
Net weight: 90kg
Gross weight:110kg
Ft-f1 fogging tester
Characteristics:
Determines auto's fogging characteristics precisely, guarantees automobiles driving safely.
Be applicable for the laboratory and works in low noise. Data test and analysis with professional software, convenient and prompt.
Bath temperature controlled by thermostat can be kept constant to 0.1ªc, creating precise testing conditions. Designs friendly and integrally, operates safely and conveniently.
World-famous brand elements with stable and reliable performance.
The strictly controlled constant thermostat can be used for the other experiments.
Conforms to din 75201, iso 6452, sae j1756.
947 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
