leak tester (0- -90KPA) for testing of the leakage of the packaging . meet the astm D3078 standard.
we have 3 different chambers 210*270mm 360*585mm 460*330mm.
ZHUOJUN redispersible polymer powders are manufactured by spray drying macromolecular copolymer dispersions under carefully defined conditions. They are mainly used improve cohesion, adhesion and flexibility in constructions especially in drymix mortar.
Composition:
Polymer Resin
It is the main ingredient of dispersion particle and a key part for redispersible polymer powders to come into play.
Additives (interior)
It plays a role of modified resin with polymer resin.
Protective Colloid
A layer of hydrophilic material will be coated on the surface of the redispersible polymer powder. The protective colloid of most redispersible polymer powder is polyvinyl alcohol.
Additives (exterior)
The anti-caking agents and super-fined mineral additives are incorporated to make sure that powder properties are maintained during storage and processing.
Application
Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries.
Features
1: Our own patent technology
2: Embedded system control
3: Touch screen operation, easy to operate
4: TFT LCD display, UI flattening design
5: Dual heat jaws, temperature controlled independently
6: Micro-printer prints mini-report
7: Pressure easy to adjust, heat temperature and time touch screen input.
8: Emergency stop button, safety design to prevent burns
9: Over temperature protection, over pressure protection
10: Silence working
11: DB9 RS232 communication port.
12: DSM system is optional(Laboratory Management Information System), easy to manage and share test data.
Technical Indexes
Heat temperature: Room temperature+6 ~ 300â??
Accuracy: ±0.2 â??
Dell time: 0.1~ 999.9s
Pressure: 0.05 MPa~1.1MPa
Heat jaw surface: 265mm Ã? 12 mm (customized)
Heat jaws: 2, controlled independently
Gas source pressure: 0.05MPa ~ 1.1MPa (self-provide)
Gas source interface: Ф6mm
Outer dimension: 536 mm (L)Ã?335 mm (W)Ã?413 mm (H)
Work noise: 0db
Power supply: AC 220V 50Hz
Net weight: 33kg
Standards
QB/T 2358(ZBY 28004)ã?�ASTM F2029ã?�YBB 00122003
Configuration
Delivery: main unit, micro-printer, footswitch, sample feeding rod.
Optional: Communication cable, DSM system
Application
For the determination of gross leaks in �exible packaging containing a headspace gas by bubble emission method.
Standards
ASTM D3078, GB/T 15171
More Deatil:
Grace
Application
GC-7960 Ethylene Oxide Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets as well as various kinds of sterilization apparatus and instruments.
Standards
YBB20162012ã?�YBB20172012ã?�YBB20182012ã?�YBB20252012ã?�YBB20262012ã?�YBB20272012
-
947 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
Application
Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries.
Features
1: Our own patent technology
2: Embedded system control
3: Touch screen operation, easy to operate
4: TFT LCD display, UI flattening design
5: Dual heat jaws, temperature controlled independently
6: Micro-printer prints mini-report
7: Pressure easy to adjust, heat temperature and time touch screen input.
8: Emergency stop button, safety design to prevent burns
9: Over temperature protection, over pressure protection
10: Silence working
11: DB9 RS232 communication port.
12: DSM system is optional(Laboratory Management Information System), easy to manage and share test data.
Technical Indexes
Heat temperature: Room temperature+6 ~ 300â??
Accuracy: ±0.2 â??
Dell time: 0.1~ 999.9s
Pressure: 0.05 MPa~1.1MPa
Heat jaw surface: 265mm ? 12 mm (customized)
Heat jaws: 2, controlled independently
Gas source pressure: 0.05MPa ~ 1.1MPa (self-provide)
Gas source interface: Ф6mm
Outer dimension: 536 mm (L)?335 mm (W)?413 mm (H)
Work noise: 0db
Power supply: AC 220V 50Hz
Net weight: 33kg
Standards
QB/T 2358(ZBY 28004)?�ASTM F2029?�YBB 00122003
Configuration
Delivery: main unit, micro-printer, footswitch, sample feeding rod.
Optional: Communication cable, DSM system
Application
GC-7960 Organic Solvent Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets,.
Technical Indexes
1.Temperature Control:
Oven: room temperature +8~420°C, accuracy ±0.1°C (at 200°C)
Injector: room temperature +8~420°C, accuracy ±0.1°C (at 200°C)
Application
OTR-1901 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.
Application
GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials.
Features
Standard Gurley, Low Pressure Gurley, High Pressure Gurley
Sheffield units, Bendtsen units
Interchangeable test heads
Output in seconds, other unit optional
Embedded system, remote service
Touch screen operation
Test data and curve real time display
Built in data query function
Built in micro-printer to print reports
Automatic overload protection.
Highly accurate sensors to ensure the accuracy and repeatability.
Swagelok piping system, to ensure system tightness and long-term stability
Advanced control device, reliable operation and long service life
Standard communication interface, configurable professional computer software
The calibration can be traceable to ensure the measurability of the test data
Support DSM system
Technical indexes
Test Range: 30,60,000 Gurley seconds,Standard,
0.0021,200um/Pa.s,Standard,
300,60,000Gurley seconds,Optional,
0,60,000 Gurley seconds,Optional,
Resolution, 0.1 Gurley seconds
Sample Amount, 1 ,Standard,,3 can be customized.
Differential Pressure,0.01kPa,20kPa,STD,1.22kPa,
Accuracy: 0.01kPa
Test Area: 1.0in2. ,0.25in2, 0.1in2 optional,
Sample Thickness: ,5mm
Test Gas: Air, O2, N2, CO2,Self-provide,
Gas Resource: 0.3MPa,1.0MPa
Interface: Ф6mm
Dimension: 320mm,L,Ã?380mm,D,Ã?410mm,H,
Power Supply: AC 220V 50Hz
Net Wt. 25 kg
Standard
ISO 5636.5,ASTM D726, TAPPI T460,TAPPI T536,TAPPI T538,TAPPI T490
Configuration
Delivery,Mainframe, Test Head (1.0in2), Super Filter, Precision Pressure Regulator.
Optional: Sample Auto Feeder, Calibration Equipment,Test Head(1.0in2), Test Head(0.25in2),Test Head(0.1 in2).
Note: Specifications are subject to change without prior notice.
Application
GTR-7001 is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, laminated films, high barrier materials, sheeting, metal foils, rubber, tires and permeable membranes.
Features
Vacuum differential pressure method
Patent technology
3 specimens test simultaneously and independently
Computer control
One-button test, test automatically through whole process
High accuracy vacuum sensors embedded in
3 Chambers with independent temperature sensor
Test under various RH conditions with Humidity generator (optional)
Environment temperature and humidity sensor inside
Permeability coefficient ,solubility coefficient and diffusion coefficient test
Chambers with water bath temperature control technology
Unit based on embedded system,24bit AD
Multiple test modes optional
Data curves display
Traceable reference film calibration
Supports DSM system (DSM, lab data management system)
Technical Indexes
Test range: 0.01 - 190,000 cm3/m2â?¢24hâ?¢0.1MPa (Standard)
Resolution: 0.001cm3/m2â?¢24hâ?¢0.1MPa
Samples: 3, independent
Vacuum accuracy: 0.1Pa
Temperature range: 5C - 95C
Temperature accuracy: ±0.1C
Humidity range: 0%RH,35%RH-90%RH,100%RH (optional)
Humidity accuracy: ±1%RH (optional)
Sample thickness: less 5mm
Sample size: >= 150mm * 94mm
Test area: 48cm2
Test gas: O2, N2, CO2, He, etc
Differential pressure: -0.1MPa - 0.1MPa
Gas interface: Ф8mm
Dimension: 730mm * 510mm * 350mm
Power supply: AC 220V 50Hz
Net wt. : 63kg
Standards
ASTM D1434, ISO 15105-1,ISO 2556,GB/T 1038-2000,JIS 7126-1,YBB 00082003
Configuration
Delivery: Main unit, computer, G-TRANS software, Temperature controller, vacuum pump(BOC Edwards), tank regulator, PCIE card, communication cable, sample cutter, vacuum grease.
Optional: Humidity generator, Reference film, vacuum grease, sample cutter, DSM system.
Application
Wvtr-9001 is based on the electrolytic sensor method and available for the water vapor permeability test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.
Features
Electrolytic sensor method
Patent technology
Film and package test
3 specimens test simultaneously and independently
One-button test, test automatically in whole process
Multiple test modes optional
Data curves display
Computer control
Digital flow adjustment
3 chambers with 3 temperature sensors
Environment temperature and humidity sensor inside
Chambers water bath technology
Unit based on embedded system, 24bit î?-î£ ad
Pressure, ppm water sensor and temperature overload protection
Traceable reference film calibration
Supports dsm system (dsm, lab data management system)
Standard
Iso 15106-3, gb/t 21529, din 53122-2, ybb 00092003
Configuration
Delivery: main unit, computer, w-trans software, temperature controller, tank regulator, pcie card, communication cable, sample cutter, vacuum grease.
Optional: package fixtures, reference film, vacuum grease, sample cutter, dsm system.
GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials.
Whip check Safety cable
1.Keywords: Whip check safety cable, whip checks, king safety cable, Hose safety whip check, air hose safety cable, whip check cable.
2.Whip check safety cable, whip checks, king safety cable, Hose safety whip check, air hose safety cable, whip check cable
Material: steel plated cable, plated spring and Aluminum ferrules, Stainless steel cable and copper ferrule is available.
Size:
1/8*20 (for 1/2 hoses to 1-1/4 hoses) Length: 20-1/4inch
1/4*38(for 1-1/2 hoses to 3 hoses) Length: 38inch
3/8*44(for 4 hoses) Length: 44inch
Max Pressure: 200PSI
3.Usage: Whip check safety cable is designed specially to prevent hose connections from whipping if the hoses or couplings failed to hold. The failure usually occurs with high pressure and will make hoses or equipment shake violently which may cause serious injury for people or the nearby coupling & equipment.
4.We aslo sell hose couplings ( Camlock, Sotrz, Bauer Guillenmin couplings ), stainless pipe fittings, valves, flanges, sanitary fittings and valves and so on.
5.If any of them be of interestedto you, please no hesitate to contact.
6.Packing : polybag inside, cartons outside; Delivery time:30days on we signed order.
7. Terms of payment: T/T, L/C,30% deposit. Delivery Port: FOB Qingdao.
HG-CPJ-32 washing machines we invent are the latest design of a new type of blunt outside inside shower of machinery which combine internal and external machine structure theory and designed on the basic of the require of the user. Their outstanding features are:
1. Apply to new and old bottles in various types and materials.
2. Spray outside, wash twice inside, and wash the bottle wholesomely and clean.
3. Wide adaptability and low water consumption using water pressure.
4. Simple structure and convenient maintenance. Its appearance is beautiful and corrosion resisting with using the stainless steel water bucket
5. Save labor and effort; high efficiency. Apply to small and medium-sized beverage manufactory
?equipment model and name
Csl-y impact specimen gap hydraulic broaching machine
? equipment usage
Impact specimen notch broaching machine is the dedicated and affiliated equipment with metallic pendulum impact testing machine, the machine adopts hydraulic drive, electric control the rise and fall of broach, broach lifting speed can be adjusted, adopting the lubricating oil to lubricate blade mouth parts at the same time, to ensure the sample accords with a requirement gap size and surface finish.The machine due to the use of a forming principle, the machining gap of good identity. Broach manufactured high-quality high-speed w18cr4v steel alloy, and its high hardness, good wear resistance, long service life, per knife can be processed more than 20000 samples.
? applicable standard
Gb/t229-2007« metal material charpy pendulum impact test method»;
Astm e23-02a«metal material gap specimen standard impact test method»;
Iso148-2008«metallic materials-charpy pendulum impact test»;
Din 50 115-1991«metal material impact test special sample size and fracture judge»
Iv main technical parameters
Sample notch type U type(u2, u3, u5), v type(v2)
Processing sample size 10×10(7.5 or 5)×55mm
Broach hardness =hrc65
Installed broach quantity 2
Cutting speed 2.5m/min ( can adjust)
System pressure 2.5mpa
Hysraulic oil storage 25l
Broach stroke 340mm(u2, v2), 390mm(u5)
Broach materials W18cv4v
Motor power 370w
Dimensions 480mm×660mm×1200mm (l×w×h)
Weight 200kg
V standard configuration
1.Host one
2.V2 broach one
3.U2 broach one
Domestic, and they will manufacture the manufacturing schedule and quality of our orders.
Step 4: rich experienced and professional team, our team have accumulated rich experience and they could solve the problems and risks and avoild potential delays in delivery.
4 after-sales service;
Many owners worry about this, especially for international power projects and we provide complete after sales service to reduce your risks such as one-to-one service system; periodic visiting; customer documents; global maintenance team, etc.
5 detailed advantages of cfbb
1). The fuels of this boiler is with broad adaptability, so many kinds of coal is suitable to supply stable and efficient heat. During the operational process of the boiler, it is easy to achieve high burning efficiency in the condition of not changing burning equipment when the coal is changed.
2). Circulating fluidized bed boiler is radically different from other boilers on the burning system. Its burning system consists of burning room, material destination and material returner. The high heat material enters the material returner together with the airflow, and the material collected will enter the material returner and then returns the burning room. This is called circulating burning which increase the burning efficiency greatly.
3). This boiler is with a wide range and high speed of load adjustment.
1)the brush is mainly used for paving operations to clear ground attachments;
2)clear milling work surface adhesion particles, enhance the binding force between the asphalt layer;
3)clear the surface of bridge, clear laitance;
4)clear these pollutants of highways and municipal roads;
5) clear the line on road surface and removal the oxide of metal surface;
6)clear the surface on coal yard，power plant and sea port.
947 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
