Roots Blower For Sale
The Roots blower is a volumetric fan, with impeller end face and front and rear end covers of the fan. The principle is to use two blade shaped rotors to move relative in the cylinder to compress and transport gas in a rotary compressor. This type of blower has a simple structure and is easy to manufacture. It is widely used in aquaculture oxygenation, sewage treatment aeration, cement conveying, and is more suitable for gas conveying and pressurization systems in low pressure situations. It can also be used as a Vacuum Pump, etc.
Type of Roots Blowers for Sale
Roots Vacuum Pump
Roots Vacuum pumps have been applied in petroleum, chemical, plastic, pesticide, turbine rotor dynamic balance, aerospace space simulation and other devices, so they should be vigorously promoted and applied in China. It is also widely used in industries such as petroleum, chemical, metallurgy, and textiles.
Rotary Air Blower
Small size, large air volume, low noise, and low energy consumption (the rotary blower adopts the principle of operating compressed air, although small in size, it has large air volume, energy saving, and silent operation that other forms of fans cannot compare with.).
Smooth operation and convenient installation (for small models, as long as they are properly placed, the vibration is minimal and there is no need to install anti vibration devices, making installation convenient).
Resistance to load changes and stable air volume (for example, if the pressure of the sewage treatment aeration tank changes, the load changes, but the air volume changes very little with the pressure change).
Equipped with an air chamber for smooth air dissipation (all models are equipped with an air chamber to prevent air pulsation and ensure smooth air dissipation).
The material is excellent, the structure is clever, and the performance is stable (all blowers are made of high-quality materials, the structure is exquisite, sturdy and durable, the performance is stable, and there are few long-term failures).
Simple maintenance, few faults, and long service life (low speed, low wear, and long service life).
A Roots Blower, also known as a positive displacement lobe blower, is a vital component in various industrial applications, including wastewater treatment, pneumatic conveying, and combustion air supply. Proper installation is crucial to ensure optimal performance, longevity, and safety. This comprehensive guide provides detailed instructions and best practices for installing A Roots Blower.
1. Pre-Installation Preparations
Technical Documentation and Planning
Review Documentation: Obtain and thoroughly review the manufacturer's installation manual, technical specifications, and dimensional drawings. Familiarize yourself with the installation requirements, procedures, and safety precautions.
Site Assessment: Evaluate the installation site to ensure it meets the environmental and spatial requirements specified by the manufacturer. Consider factors such as ambient temperature, ventilation, and accessibility for maintenance.
Foundation Preparation
Foundation Design: Construct a robust concrete foundation capable of supporting the blower's weight and minimizing vibrations. The foundation should be level, free from cracks, and elevated at least 30 cm above the surrounding ground to prevent flooding and facilitate maintenance.
Anchor Bolts: Install appropriately sized anchor bolts in the foundation to secure the blower and its driver (e.g., electric motor). Ensure the bolts are accurately positioned according to the blower's mounting dimensions.
2. Unpacking and Inspection
Shipment Inspection: Upon delivery, inspect the blower and associated components for any signs of damage incurred during transit. If damage is detected, file a claim with the carrier and notify the manufacturer immediately.
Component Verification: Cross-reference the received parts with the packing list to confirm that all components are present. If any items are missing, contact the manufacturer or supplier for replacements.
Cleaning: Remove any protective coverings and clean all parts to eliminate dust, debris, or corrosion inhibitors. Ensure that the blower's internal passages are free from foreign materials that could impede operation.
Roots blowers are used in numerous industries and industrial processes, including pneumatic conveying. Roots blowers play a vital role in many manufacturing and processing systems. Roots blowers are technically known as "positive displacement rotary blowers" and are commonly referred to as "blowers".
What does a Roots blower do?
Roots blowers are used to produce a constant airflow that is independent of the exhaust pressure conditions. The application of Roots blowers is limited to low and medium pressure and vacuum processes, and can be used to provide small to large airflow rates.
How does a Roots blower work?
Roots blowers consist of two identical and symmetrical rotors with two or three meshing blades in a sealed housing. The housing is valveless, and the air inlet and exhaust ports are usually located on opposite sides. The rotors rotate in opposite directions and are synchronized using a set of gears.
The air is displaced from the inlet to the outlet by the movement of the meshing blades on the counter-rotating rotors. The airflow rate produced by the displacement is mainly determined by the rotational speed of the rotors within the Roots blower. There is no change in the amount of air within the Roots blower, so no air compression occurs. Roots blowers are typically air-cooled, and some models do not require oil as a lubricant (oil-free).
Product Description
The Rotary Air Blower utilizes an involute profile integral shaft ductile iron impeller design. The head plate, gear cover, end caps and rigid one-piece housing are made of gray cast iron. Carburized and ground alloy steel timing gear tapers are mounted on the shaft and secured with locknuts. Cylindrical roller bearings are used on the drive end and ball bearings on the gear end.
The characteristics and advantages of rotary blowers
1. Small size, large air volume, low noise, and low energy consumption (the rotary blower adopts the principle of operating compressed air, although small in size, it has high air volume, energy saving, and operates quietly)
2. The operation is smooth and the installation is very convenient (for small models, as long as they are placed properly, the vibration is minimal and there is no need to install anti vibration devices, making the installation very convenient).
3. Resistance to load changes and stable air volume (for example, if the pressure of the sewage treatment aeration tank changes, the load changes, but the air volume also changes very little with the pressure change).
4. Equipped with an air chamber for smooth air dissipation (all models are equipped with an air chamber to prevent air pulsation and ensure smooth air dissipation).
5. The material is excellent, the structure is clever, and the performance is excellent (all blowers are made of high-quality materials, the structure is exquisite, sturdy and durable, and the performance is excellent, with few faults occurring during long-term use).
6. Simple maintenance, few malfunctions, and long service life (low speed, low wear, and long service life).
Centrifugal Air Blower For Sale
Centrifugal air blowers adopt three core high-end technologies: "ultra high-speed direct connection motor", "air suspension bearing", and "high-precision single-stage centrifugal impeller", creating a new era of high efficiency, high performance, low noise, and low energy consumption fans. It is a new generation of high-tech civilian products developed with great dedication based on the design experience of aviation turbomachinery.
Features
1. Energy saving and high efficiency
The air suspension centrifugal blower uses air bearings, direct connection technology, a high-efficiency impeller, a permanent magnet brushless DC motor, and no additional friction. The fan automatically adjusts the consumption of motor power based on the output (adjustable range of air volume 40-100%) to maintain the high efficiency of equipment operation.
2. No vibration, low noise
Adopting air bearings and direct connection technology, there is no vibration generated, and the fan does not need to be equipped with sound insulation devices; The equipment is lightweight and does not require a special foundation. The installation and layout are simple and flexible.
3. No lubricating oil
The fan adopts air-bearing technology, and the system does not require a lubricating oil system, providing clean air to special industries such as electronics, medicine, and food. The operating temperature of the air bearing has reached 600 degrees, and all the drawbacks of the oil-based bearing system have been successfully resolved.
4. No maintenance
Without the necessary gearbox and oil bearings for traditional fans, our series of high-tech impellers and motors are directly connected without couplings. The intelligent control system and key components use AL7075 (aviation aluminum). These technologies ensure that the equipment is maintenance-free, reduce maintenance costs for users, and improve the stability of the gas supply system operation.
5. Convenient operation control
Self-checking and constant pressure operation, load/no load operation, overload control, and unmanned operation can be achieved on a personal computer for fan speed, pressure, temperature, flow rate, etc. The fan adjusts the flow rate by adjusting the speed of the impeller. Adjusting the speed can easily adjust the flow rate based on the temperature and pressure changes of the inhaled air. It can automatically and manually adjust the flow rate.
6. Small device installation space
The air suspension centrifugal blower equipment is lightweight, small in size, easy to install, and can significantly save users on building and auxiliary electrical control system investment.
947 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
Roots Blower For Sale
The Roots blower is a volumetric fan, with impeller end face and front and rear end covers of the fan. The principle is to use two blade shaped rotors to move relative in the cylinder to compress and transport gas in a rotary compressor. This type of blower has a simple structure and is easy to manufacture. It is widely used in aquaculture oxygenation, sewage treatment aeration, cement conveying, and is more suitable for gas conveying and pressurization systems in low pressure situations. It can also be used as a vacuum pump, etc.
Type of Roots Blowers for Sale
Roots Vacuum Pump
Roots vacuum pumps have been applied in petroleum, chemical, plastic, pesticide, turbine rotor dynamic balance, aerospace space simulation and other devices, so they should be vigorously promoted and applied in China. It is also widely used in industries such as petroleum, chemical, metallurgy, and textiles.
Rotary Air Blower
Small size, large air volume, low noise, and low energy consumption (the rotary blower adopts the principle of operating compressed air, although small in size, it has large air volume, energy saving, and silent operation that other forms of fans cannot compare with.).
Smooth operation and convenient installation (for small models, as long as they are properly placed, the vibration is minimal and there is no need to install anti vibration devices, making installation convenient).
Resistance to load changes and stable air volume (for example, if the pressure of the sewage treatment aeration tank changes, the load changes, but the air volume changes very little with the pressure change).
Equipped with an air chamber for smooth air dissipation (all models are equipped with an air chamber to prevent air pulsation and ensure smooth air dissipation).
The material is excellent, the structure is clever, and the performance is stable (all blowers are made of high-quality materials, the structure is exquisite, sturdy and durable, the performance is stable, and there are few long-term failures).
Simple maintenance, few faults, and long service life (low speed, low wear, and long service life).
ï¼?SYNEï¼?Shandongsenyuan new energy technology co., LTD., founded in 1998, is a leading manufacturer of power generation solutions in China. We specialize in the design, sale, installation, maintenance and service of gas power stations produced by natural gas, methane, diesel, biomass gas, petroleum associated gas, coal gas, landfill and sewage treatment. And provide project consultation, system design, technical support and other services;
Our products:
Farm power generation, diesel power generation, natural gas power generation, heavy oil power generation, garbage power generation
garbage power generation project design, the contractor and operation;
100Kw - 3000Kw generator set, etc.
Shandongsenyuan new energy technology co., LTD., SYNE founded in 1998, is a leading manufacturer of power generation solutions in China. We specialize in the design, sale, installation, maintenance and service of gas power stations produced by natural gas, methane, diesel, biomass gas, petroleum associated gas, coal gas, landfill and sewage treatment. And provide project consultation, system design, technical support and other services; www.sy-ne.com
Our products:
Farm power generation, diesel power generation, natural gas power generation, heavy oil power generation, garbage power generation
garbage power generation project design, the contractor and operation;
100Kw - 3000Kw generator set, etc.
Item
Unit
HBC85-13-132S
Theoretical concrete conveying displacement (H.P/L.P)
m3/h
60/85
Theoretical concrete output pressure (H.P/L.P)
MPa
13.5/8
Pressure of hydraulic system
MPa
32
Displacement of main oil pump
ml/r
190
Power of main power/rotation speed
kw
132/2200
Main oil pump diameter/pole diameterÃ?stroke
mm
Ï?130/Ï?80Ã?1800
Conveying cylinder diameter Ã? stroke
mm
Φ200�1800
Reversing times (H.P/L.P)
Min.-1
17/27
Hopper capacityÃ?loading height
m3Ã?mm
0.7Ã?1500
Concrete slump
mm
120-230
Theoretical Max. vertical height
M
200
Theoretical Max. horizontal distance
M
600
Capacity of hydraulic oil tank
L
500
Capacity of water tank
L
600
L x W x H
M
6.8Ã?2.3Ã?2.5
Total mass
kg
75000
H.P/L.P Switch
/
Automatic
Remote control
/
Wireless
Reference Chassis Wheelbase
M
4.7
Features:
1 - Portable and flexible, easy and simple operation, meet the welding of multiple angles and positions;
2 - Equipped with 5m/10m imported optical fiber, flexible and convenient for outdoor welding;
3 - Infrared positioning is used to verify the welding head position and verify the position during welding.
The welding position is more accurate to ensure a more beautiful weld;
4 - Not easy to deform, easy to polish and polish.
AKQ-1500 is a handheld laser rust remover composed of fiber laser generator, laser rust removal gun and laser rust removal system. It uses continuous wave laser to irradiate the metal surface, which can effectively remove rust at high speed.
AKJ1530FBR fiber laser cutter with a fully enclosed design and exchangeable table. It's safety and No Pollution. Double working table makes it easy to change materials. With auto rotary attachment is used for cutting metal tube.
