Our welded wire mesh r extensively used in industry, agriculture, transportation, construction, mining and so on. Products available: hot-dip galvanized after welding, hot-dip galvanized before welding, electro galvanized after welding, electro galvanized before welding, stainless steel welded wire mesh; pvc welded wire mesh
With led torch and alarm , built-in rechargeable battery
Four powers supply: solar power charging, dynamo power charging, ac power charging, 2pcs aa battery
Can supply colors: black , sliver , blueberry , plum , lime , strawberry , tangerine
Packing: box size:52*32*55cm qty:18pcs/ctn g.W:14.0kg/ctn 1x20ft:5600pcs
MZ/RMZ type gas booster fan is new gas exhaust based on development tendency of two-period form gas stove, and combine the one stage gas stove. It has lower noise, flat performance curve, high flow control area, high efficiency, low power consumption, reliable sealing and stable operation. It is applicable to elevated pressure for factories and mines gas station, blast furnace gas, coke oven gas, and converter gas, as well as airtight rigorous gas such as ammonia gas or marsh gas.
Parameter range of the products: The temperature of the medium is within 400. General pressure range from 100-2500mmH O; general flow range from 60-500m/min.
G/Y4-73 series boiler centrifugal is suitable for 2-670T/h steam boiler in the thermal power plant. If no special requirements, G4-73 is also used for mine ventilation and general ventilation, ventilation fan is delivering air, the highest temperature does not exceed 80. Induced draft fan is delivering flue gas, and the highest temperature does not exceed 250. Dust removal device must be installed in front of the induced draft fan, according to the use of the general power plant, the dust and hard particles is 150g/m3. Design temperature of G4-73 is 20, design temperature of Y4-73 is 140.
We can design and manufacture G/Y4-73series with Â
1.Corrosion-proof,high temperature fan
2.Overall damping bracket fan
Technical Data
C6-48 dust exhausting centrifugal ventilator fan is used for discharging air mixture, which include wood debris, fiber and dust. This fan adopt the working principle of centrifugal fan, it has many features such as large volume, high pressure, war resistance, long serve life, etc. It is very popular for dirt customers. If discharge hard particles, it must add dust-cleaning device in the front of inlet.
G/Y6-41 series boiler centrifugal induced draft fan are featured with low noise, high performance, smooth operation of transmission group, high reliability and high institutions operating life.
Suitable for various coal-fired industrial boilers equipped with smoke and dust removal apparatus drum/induced draft fan system, drum fan transport medium is air, the maximum temperature does not exceed 80â??, induced draft fan transport medium is flue gas, the maximum temperature not exceed 250â??. Dust removal device must be installed in front of this fan to minimize flue gas dust contents.
Roots type blower is a positive displacement blower, also know as rotary lobe blower, tri lobe blower, twin lobe blower, rotary piston blower, roots pump, roots compressor etc.
Single stage of pressure upto 1.0 kg/cm2 (1.0 bar)
Double stage of pressure upto 2.0 kg/cm2 (2.0 bar)
Single stage of vacuum to -0.8 kg/cm2 (-0.8 bar)
Capacity of single stage upto 49476 m3/hr, that is 29120 cfm
Medium transferred: air & gas ( biogas/ coal gas/ so2/hydrogen etc unstabe gases)
Contact me for more: roots_blower@126.com
It works as a pressure blower and/or vacuum pump for medium air and gas.
Single stage of pressure upto 1.0 kg/cm2; Capacity upto 49476 m3/hr; Vacuum upto -0.8 kg/cm2
Our roots blower and vacuum pump can be V belt driving or Direct coupling.
Air cooled roots blower, Water cooled roots blower available.
The blowers are made by using state of art technologies and CNC machines.
Material for transfer air is cast iron, for gas roots blower and gas vacuum pump, Ni-P coating and Teflon ( PTFE) and Stainless Steel available.
ETP Blower applied as air blower used in effluent treatment plant for aeration filter backwash etc. purpose.
The air roots blowers we offer are tri lobe rotary lobe blower or twin lobe rotary blower, these are a positive displacement blower, famous as roots blower or roots air compressor.
The biggest capacity of single stage we manufacture is 49476 m3/hr. The pressure can reach 1.0 kg/cm2, that is 1 bar.
Besides pressure blowers, Airus blower can also offer suction Vacuum Pump, and vacuum can reach -0.8 kg/cm2, that is 0.8 bar.
Airus blower, belongs to Huadong blower, are widely used in etp field and also stp ( sewage treatment plant) and also for many other fields, such as, aquaculture fish pond or shrimp pond, cement plant, oil & gas, chemical industry, sugar plant, food plant, steel plant and power plant etc.
Huadong Airus blower can transfer air and also gas ( coal gas, biogas, natural gas, hydrogen etc) with anti-corrosion anti-explosion treatment.
Applications ( pressure blower & vacuum pump)
Wastewater treatment Stp/ Etp Aquaculture Pneumatic conveying of bulk material ( cement/ fly ash/ grains/ power & particals etc)Cement plantSteel plant Power plant Paper plant Sugar plant Food plant Oil & Gas …
Mechanical Vapor Recompression Blower MVR blower used as compressor for wastewater treatment and industries like, chemical, medicine, food, wine, milk, beverage etc. known as roots compressor, The main parts made by stainless steel or ni-p coating for anti-corrosion with mechanical seal.
The MVR blower is also a roots type blower but with special treatment.
Please contact for more: roots_blower@126.com
Roots type blower is a positive displacement blower, also know as rotary lobe blower, tri lobe blower, twin lobe blower, rotary piston blower, roots pump, roots compressor etc.
As gas blower, it need to be anti-corrosion and/or anti-explosion based on different gas. So the treatment will be different for different gas. Currently, for gas blower or called gas booster, piston ring seal, mechanical seal for anti-explosion, stainless steel material and/or Ni-p coating and/or Teflon coating for anti-corrosion.
Single stage of pressure upto 1.0 kg/cm2 (1.0 bar)
Double stage of pressure upto 2.0 kg/cm2 (2.0 bar)
Single stage of vacuum to -0.8 kg/cm2 (-0.8 bar)
Capacity of single stage upto 49476 m3/hr, that is 29120 cfm
Medium transferred: air & gas ( biogas/ coal gas/ so2/hydrogen etc unstabe gases)
Contact me for more: roots_blower@126.com
It works as a pressure blower and/or vacuum pump for medium air and gas.
Single stage of pressure upto 1.0 kg/cm2; Capacity upto 49476 m3/hr; Vacuum upto -0.8 kg/cm2
Our roots blower and vacuum pump can be V belt driving or Direct coupling.
Air cooled roots blower, Water cooled roots blower available.
The blowers are made by using state of art technologies and CNC machines.
Material for transfer air is cast iron, for gas roots blower and gas vacuum pump, Ni-P coating and Teflon ( PTFE) and Stainless Steel available.
ETP Blower applied as air blower used in effluent treatment plant for aeration filter backwash etc. purpose.
The air roots blowers we offer are tri lobe rotary lobe blower or twin lobe rotary blower, these are a positive displacement blower, famous as roots blower or roots air compressor.
The biggest capacity of single stage we manufacture is 49476 m3/hr. The pressure can reach 1.0 kg/cm2, that is 1 bar.
Besides pressure blowers, Airus blower can also offer suction Vacuum Pump, and vacuum can reach -0.8 kg/cm2, that is 0.8 bar.
Airus blower, belongs to Huadong blower, are widely used in etp field and also stp ( sewage treatment plant) and also for many other fields, such as, aquaculture fish pond or shrimp pond, cement plant, oil & gas, chemical industry, sugar plant, food plant, steel plant and power plant etc.
Huadong Airus blower can transfer air and also gas ( coal gas, biogas, natural gas, hydrogen etc) with anti-corrosion anti-explosion treatment.
Applications ( pressure blower & vacuum pump)
Wastewater treatment Stp/ Etp Aquaculture Pneumatic conveying of bulk material ( cement/ fly ash/ grains/ power & particals etc)Cement plantSteel plant Power plant Paper plant Sugar plant Food plant Oil & Gas …
Pressure upto 1 bar, vacuum to (-)80 kpa
Flow capacity upto 200 m3/min.
Oil free conveying.
Widely used in various field, such as, wastewater treatment, aquaculture, cement, food, surger, steel, oil & gas, landfill etc.
Seaworthy packing, generally in plywood+metal case
1:High efficiency and energy saving, 90% more efficient than the traditional high bay lamps ;consuming 60% less than the compact fluorescent lights
2:Lifetime: over 30000hrs
Green technology, no UV,IR or radiation emission, PO free
3:High efficiency diffuser, reducing the energy lost
4: Super brightness LED chip,CRI>80.
Constant voltage and constant current driver, to promise the qualilty and stability of the lamps.
5: Excellent aviational aluminum heatsink,ensure the lamp long lifespan.
6: High PF>0.95 excellent components
The High airflow Fan Filter Unit is one of the quietest and best priced units on the clean market. With this unit, high quality air can be delivered to the clean room. And with good air flow. It is suitable for manufacturers of semiconductors, electronics, flat panel displays and disk drives and for the optical and biological industries, for applications such as clean rooms, clean benches, clean production lines, assembled clean rooms and partial class 100s and other places where strict control of contamination in the air is required, with low energy consumption and reduced running costs.
Features
The Fan Filter Unit controls the speed in a variety of ways, making it easier to adjust the speed and increasing the filtration efficiency, which can significantly reduce the cost of work. Built-in duct countercurrent system that reduces noise and pressure, improves fan efficiency, good silent system, can be combined with various brands of filters. The fan of the fan Filter unit is a high efficiency centrifugal fan that provides high airflow and has a long life of over 50,000 hours, i.e. over 6 years, after which time only the filter needs to be replaced.
Application
The High airflow FFU is mainly used for pre-filtration of multi-stage filtration systems and primary filtration of air conditioning systems.
With a built-in duct guide system, it also reduces noise, reduces pressure loss and increases fan efficiency. The fan selects a high efficiency centrifugal fan, which provides a large air volume and is suitable for clean rooms with a high degree of cleanliness. FFU is particularly suitable for assembling into an ultra-clean production line and can be configured for single use as required, or can be connected in series with multiple products to be scanned and tested one by one with a dust particle counter before leaving the factory to ensure product quality.
