Input 115VAC(220VAC)
12VDC@10amp supply current
Multiple outputs (16 channel)
Four auto-reset PTC fuse protected output
Power on/off switch
DC regulated, over current and voltage protected
Individual LED indicator for each out put
Brand TITA
ModelT9314-72
MaterialSolid Wood
InstallationFloor Mounted
SizeVanity: 72"W x 23.5"D x 33.5"H ; Mirror: 70"W x 31.5"H
PackingExport standard carton outside with 2cm foam inside.
Shipment25-40 days for 40HQ after your deposit.
Payment Terms 30% T/T in advance and 70% T/T after seeing the copy of B/L or L/C at sight.
2168 Archery Accessories Suppliers
Short on time? Let Archery Accessories sellers contact you.
The video ground loop isolator gb100 is passive device which reduces ground loop interference with cctv signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials. Differences in ground potentials are typically caused by unbalanced power line loads.
Features:
Bnc male to bnc female with mini cable 25cm on both sides
Passive, no power required
Prevents video-signal distortion caused by video ground loops
Eliminates picture tearing, cross talk and rolling
Prevents power cables laid by others interfering with the cctv system
Built in tvs (transient voltage suppressors) for surge protection
Built in video filter, perfect to work with dvr to immunity dvr interference, for extra interference rejection
Others same as ground loop isolator function
Technical specifications:
Insertion loss 0.5db
Frequency response 20hz- 10mhz, +0/-3db
Input resistance 75 ohm
Output resistance 75 ohm
Isolation voltage 600vdc (min)
Insulation resistance 100m ohm
Transient voltage suppressor 12 vrms
C (mm) 55*28*20 with 25cm*2 cable
Material Abs black
Installation view
The video ground loop isolator should be installed where runs of video cable are known to have ground loops. It must be installed in the video cable that has come directly from the camera, but before the cable has been connected to anything else.
If several video cameras come from the same area, fix a video ground loop isolator in every cable, or a ground loop will still remain.
4.3 Inch Wrist CCTV AHD and Analog Camera Tester (CT600AHD)
Description:
PAL/NTSC Auto Adapt for Analogue Cameras and AHD Cameras
Support AHD 1080P/960P/720P and CVBS cameras
Support 1ch Audio Test
Support UTP cable test
5VDC output for mobile phone
12VDC output for CCTV Camera
MINI USB Universal Charging Port
Low Power Consumption
Auto Sleep In 3 Minutes Without Signal
Rechargeable Li-ion battery 3.7v, 2600mA replaceable.
Features:
1. high definition low noise processing chips
2. superior ambient noise suppression microphone
3. adjustable sensitivity metal
4. explosion sites dedicated
5. built-in noise reduction circuit
6. power polarity protection circuit;
Specifications:
BrandChinasky
Model number506
Work voltage6 ~ 14vdc
Work current12ma
Frequency200 ~ 10khz
Output impedance600|
Pickup range50~100m2
Work temperature-20
Package dimension45x45x19mm
MaterialMaterial
;
What is our micrphone for?
This audio surveillance microphone can be added to any surveillance system with audio input. The cctv microphone is typically used as an add-on to cctv cameras that do not have built-in audio.
;
This microphone is stand alone as it does not rely on the power source from a security camera. Plug and play cables can be used with these microphones to easily run both the audio and power centrally back to the dvr.
;
The mic comes with its own 12v dc power supply and can be used with cctv camera pros stand alone surveillance dvrs or pc based dvrs, such as geovision.
;
Because the microphone has a female rca input and most dvrs have rca inputs for the microphone inputs, we include two bnc to rca converters for each end of the plug and play cable. Order the cable with this microphone and the converters are included. See the below audio surveillance connection diagram for more information.
Material:pp
Specifications:
Denier:600-1, 000denier
Density/sq.Inch:8*8, 10*8, 10*10, 12*12
Various colors are available
Weight:90g/sqm-260g/sqm
Width without joint:1'-8'(0.3m-2.44m)
Width with joint:8'-100'(2-44m-30m)
Printing :three-color printing available
Size:2*3m, 3*4m, 4*6m and more , any sizes are available
Uv.Fr treatment available upon request.
Pp/pe fabric both sides iaminated, reinforced eyelets every 1m or 3'or 1yd interval (30cm, 50cm interval also available)
Each piece in a polybag with your insert paper then proper pieces in a carton box packing or same color bale packing
Small size bathroom cabinet
1)overall size: 600*460mm
2)stainless steel decoration
3)two dtc drawer
4)affordable price.
Product size
1)main cabinet:580*440*400mm
2)basin:600*460*220mm
Vol£º0.24m
Moq£º50pcs
Loading quantity£º280pcs in one 40hq
Painting
Dust-free painting room, environmentally-friendly paint.
1)painting both inside and outside.
2)three times for basic coat, three times for finish coat.
3)matt finish.
Cabinet packing: five layer carton box + 6pcs foam around ceramic packing: five layer carton box + thick foam
Modern bathroom vanity
1)overall size: 48''x22''x34''
2)solid wood cabinet
3)marble
4)one year warranty.
Finishing:matt painting
Vol:1.16m
Moq:50pcs
Loading quantity:55pcs in one 40hq
Outer packing: carton box. Inner packing: epe and 6 side foam. Various packing options available upon request.
Product size
1)vanity:48''x22''x34''
2)side cabinet:18''x17''x60''
3)mirror:39''x44''
