Types of hot stamp foil.
1. Fabric and fabric gilding paper (cloth, clothing, etc.);
2. Soft and hard plastic gilding paper such as ABS, PVC, PMMA;
3. Electrical gilding paper with wire drawing, double-sided, transparent and mirror surface;
4. PP, PE gilding paper (cosmetics / daily necessities packaging);
5. OPP film, paper gilding paper (cigarette / wine box packaging);
6. Metal and glass gilding paper (cosmetics bottles, wine bottles, metal nameplates);
7. Leather / leather, suede gilding paper (leather, leather, shoe materials);
8. Wood / bamboo bronzing paper; 9. Process decoration with gold foil and silver foil;
Suitable for hot stamping of ABS, PS, PVC, PC, PP, PE, nylon plastic, etc;
High scratch resistance, high chemical resistance, high fingerprint resistance and strong covering force,It has passed the EU ROHS standard and SGS test.
Welcome to discuss with me if you have any product request.
Our products are made of imported raw materials and water-based inks. They are green, environmental friendly, uniform in color, wear-resistant and colorfast, lifelike and wood like, making your home decoration more environmentally friendly and natural.
The product is stability, good weather resistance and high flatness.
Products meet the European Union and the United States and other environmental standards.
The products are in accordance with the highest U.S. fire safety standards UL-94 vtm-0.
Product Characteristics:
Low VOC emission
Scratch-resistant
Fire retardant
Good texture clarity
Weather resistant
Good stability
Small color deviation
Damp and mildew proofing
Features:
1, This product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, natural stone material
2, The indoor ceramic tile adhesive of light steel frame system board, like gypsum board and Eight board
3, Can be used on the low water absorption surface, like paste new ceramic tile above the old ones, and can be used on the firm painting surface
4, Excellent flexibility, can bear the bonding layer stretch that caused by temperature
5, Good anti-infiltration function
6, No need to wet the brick wall, effectively improve the efficiency.
Surface Treatment:
1, The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.
2, For the new wall, when finding the leveling layer of cement mortar, plaster, should improve the leveling layer of mortar label the cohesive force of the wall, or mix MB-03 slurry additive. Specific reference, please look at the MB-03 introduction.
Operation process:
1, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2
2, Push the ceramic tile or heavy type ceramic tile above it
3, For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material
4, Can be used for the old ceramic tile re-tread.
Cautions:
1, Never mix the dry slurry with water and use again
2, For the light wall board install large-scale decorative panels, like gypsum board and Eight board, confirm the wall firmness before operation
3, For the painting surface, make sure the initial bond strength and no flake
4, Operating under 5¡æ~40¡æ situation
5, Clean the surface by little wet sponge or cloth before it dry
6, Leave 1.5mm joint space between two tiles, suggesting MB-MC color anti-moldy gap filler.
Technical Reference:
Coverage area(amount) Technical reference
using 3*3mm tooth scraper about 1.7kg/m2 1, adjust time: about 15min (adjust time: the effective time for the dislocation to adjust)
using 6*6mm tooth scraper about 3.0kg/m2 2, cool time: about 10min (cool time: the longest cool time that the adhesive can last )
using 10*10mm tooth scraper about 4.5kg/m2 3, dry time: 24h (according to the weather) 4, water resistance: excellent; non-toxic, prevent fire
the smoother the surface, the less amount 5, when dry, anti-weak acid, anti-strong alkali and oil resistance 6, cut degree: £¾1.2MPa (14days later).
Store Method: Store in cool and dry place, unopened product can be saved for one year.
25kg/bag
761 Self Adhesive Foil Suppliers
Short on time? Let Self Adhesive Foil sellers contact you.
Our Company Offer Good Quality Of Hot Melt Adhesive Include Glass Transparent And Normal Adhesive.
Item Color
Low Tempreture Light Yellow, White, Brown
130-150.C
Middle Tempreture Light Grey, White, Brown, Light Yellow
150-180.C
High Tempreture White , Brown, Light Yellow, Grey White
180-210.C
Features:
1, This product is a new type strong stone adhesive, applied to all kinds of low water absorption stone materials like large-scale artificial stones, culture stones, and natural stones
2, No need to wet the brick wall, effectively improve the efficiency
3, Strong bond ability, material-reducing, much safer and firmer than the traditional cement adhesive, also can reduce the construct trash and the quantity of the wall
4, Good anti-acid and anti-alkali and anti-infiltration and anti-aging function
5, Small shrinking rate, no cracking, can be used in cold and humid environment.
Application:
1, The adhesive for cement plaster, brick, smooth cement wall paste stone
2, The adhesive for low water absorption surface and light steel frame system board, like gypsum board and Eight board.
Surface Treatment:
The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.
Operation Process:
1, The ratio: MB tough stone adhesive: water: 3.3: 1 (25kg powder, about 7.5kg water) mixed and stirred into paste, using an electric mixer to make particle paste, put it aside for a few minutes and then a little stirring to gain the better effect
2, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2, then push the stone above it
3, For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material.
Normal Amount:
Coverage areas differ according to the circumstance:
1, using 3*3mm tooth scraper about 1.8kg/m2
2, using 6*6mm tooth scraper about 3kg/m2
3, using 10*10mm tooth scraper about 4.8kg/m2
Note: bricks for wall using 3*3mm tooth scraper or 6*6mm tooth scraper, bricks for floor using 6*6mm tooth scraper or 10*10mm tooth scraper.
Cautions:
1, Make sure the smooth and vertical rate of the surface before operation
2, Never mix the dry slurry with water and use again
3, For the painting surface, make sure the initial bond strength and no flake
4, Finishing after 24h can be walked in or fill the crack.
Store Method:Store in cool and dry place, unopened product can be saved for one year.
Features:
1. This product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, and natural stone material
2. The indoor ceramic tile adhesive of light steel frame system board, like gypsum board and Eight board
3. Can be used on the low water absorption surface, like paste new ceramic tile above the old ones, and can be used on the firm painting surface
4. Excellent flexibility, can bear the bonding layer stretch that caused by temperature
5. Good anti-infiltration function
6. No need to wet the brick wall, effectively improve the efficiency.
Surface Treatment:
1. The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.
2. For the new wall, when finding the leveling layer of cement mortar, plaster, should improve the leveling layer of mortar label the cohesive force of the wall, or mix MB-03 slurry additive. Specific reference, please look at the MB-03 introduction.
Operation Process:
1. Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2
2. Push the ceramic tile or heavy type ceramic tile above it
3. For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material.
Cautions:
1. Never mix the dry slurry with water and use again
2. For the light wall board install large-scale decorative panels, like gypsum board and Eight board, confirm the wall firmness before operation
3.For the painting surface, make sure the initial bond strength and no flake
4.Operating under 5¡æ~40¡æ situation
5.Clean the surface by little wet sponge or cloth before it dry
6.Leave 1.5mm joint space between two tiles, suggesting MB-MC color anti-moldy gap filler.
Technical Reference:
Coverage area(amount).
using 3*3mm tooth scraper about 1.7kg/m2.
using 6*6mm tooth scraper about 3.0kg/m2.
using 10*10mm tooth scraper about 4.5kg/m2.
Technical reference:
1, Adjust time: about 15min (adjust time: the effective time for the dislocation to adjust)
2, Cool time: about 10min (cool time: the longest cool time that the adhesive can last )
3, Dry time: 24h (according to the weather)
4, Water resistance: excellent; non-toxic, prevent firethe smoother the surface, the less amount
5, When dry, anti-weak acid, anti-strong alkali and oil resistance
6, Cut degree: £¾1.2MPa (14days later).
Store Method:Store in cool and dry place, unopened product can be saved for one year.
Features:
1, This product is a new type strong stone adhesive, applied to all kinds of low water absorption stone materials like large-scale artificial stones, culture stones, and natural stones
2, No need to wet the brick wall, effectively improve the efficiency
3, Strong bond ability, material-reducing, much safer and firmer than the traditional cement adhesive, also can reduce the construct trash and the quantity of the wall
4, Good anti-acid and anti-alkali and anti-infiltration and anti-aging function
5, Small shrinking rate, no cracking, can be used in cold and humid environment.
Application:
1, The adhesive for cement plaster, brick, smooth cement wall paste stone
2, The adhesive for low water absorption surface and light steel frame system board, like gypsum board and Eight board.
Surface Treatment:
The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.
Operation Process:
1, The ratio: MB tough stone adhesive: water: 3.3: 1 (25kg powder, about 7.5kg water) mixed and stirred into paste, using an electric mixer to make particle paste, put it aside for a few minutes and then a little stirring to gain the better effect
2, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2, then push the stone above it
3, For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material.
Normal Amount:
Coverage areas differ according to the circumstance:
1, using 3*3mm tooth scraper about 1.8kg/m2
2, using 6*6mm tooth scraper about 3kg/m2
3, using 10*10mm tooth scraper about 4.8kg/m2
Note: the amount is related to the smooth, vertical rate, and thickness of the stone material
Cautions:
1, make sure the smooth and vertical rate of the surface before operation
2, never mix the dry slurry with water and use again
3, for the painting surface, make sure the initial bond strength and no flake
4, Finishing after 24h can be walked in or fill the crack.
Store Method:
Store in cool and dry place, unopened product can be saved for one year.
Easy to tear.
Easy to wrap into various shapes.
Transmit heat quick.
Double sided available.
Anti-oil and anti-sticking.
Food grade safe.
Thickened and not easily damaged.
Household/commercial rolls are available.
EVA Hotmelt Adhesive is the idealist environmentally friendly adhesive material, it is used for Suitable for Manual and Automatic Edge-Banding Machine Excellent bonding strength for veneers of wooden, PVC, Melamine, ABS to mid-dense fiberboard, particleboard, and plywood.
Provide customized services
Hundreds of specifications
Eco friendly
Food grade safe material
Take-out packaging
Put into fridge to keep fresh
Good wrapping and lock the taste of food
Thickening hardness, not easy to deformation
Widely used,convenient and efficient
Characteristics:
Homey 860, is a one-part, neutral cure, multi-purpose silicone sealant formulated for trades/tradesman, domestics and decoration usages.
Typical uses:
a) glass, aluminium, ceramics, titles, metal & steel, fibre glass, most plastics, stone, porous & non-porous substrates.
b) for glazing glass & mirror, window & doors, facade panels and waterproofing
Cas no.:, 9009-54-5
Other names:, silicone sealant
Mf:, mixture
Einecs no.:, 230-391-5
Place of origin:, china(mainland)
Classification:, other adhesives
Main raw material:, silicone
Usage:, construction, woodworking, glazing glass, glass, mirror, window
Brand name:, homey
Model number:, 860
Type:, silicone sealant
Component:, one component
Hs code:, 3506100010
Curing system:, neutral cure
Volume:, 280ml
Color:, translucent, white, grey, bronze, black
Fire retardant grade:, grade b2
Performance:, waterproof, weatherproof, anti-aging
Oem:, available
Price:, negotiable
Shelf life:, 12months
Storage:, store at 25, , or below
Packaging details:, 280ml, 300ml;24pcs/ctn
20' container 24pcs/ctn, 2000 cartons without pallet, 1440 with pallet
Sealable-spill out
Recyclable - easy to recycle
Lightweight - easy to transport and carry
Food grade material can direct touch with food
High barrier sterilization,for a longer shelf life
Convenient and quick use,heat or refrigerate directly
Double Thickening hardness-40C-280C no deformation
Support customization-improving outline of product and grade
Mainly designed for application adhesive of non-woven goods and sanitary towel goods.
Properties: Good initial tack, excellent holding power, light odor, no stringing, and good
resistant oil-penetration and so on.
Application:
Mainly designed for application adhesive of non-woven goods and sanitary towel goods.
Properties: Good initial tack, excellent holding power, light odor, no stringing, and good
resistant oil-penetration and so on.
Technical Data:
Appearance:Clear yellow block Color:0-2
Softening point (R&B):70C Toxicity:innocuity
Initial Tack:>15#ball Peel strength :> 10N/in
Viscosity:2500CPs@150â??
Heat resistant: From below 5â?? to 70â??, holding power is 2 hours at 45â??, half an hour at
65â??.
Suggested running temperature:155â??-175â??
Package:20kg/case , , 1kg/piece
Storage:Store in a clean, dry area.
Storage cycle:12 months.
Note:
Wear goggles and adiabatic gloves when working around hot melt machine.If the plant line
stops for over 2 hours,The glue temperature should be tuned down below 120C or turn off the
machine. Regularly maintaining and cleaning machine.
Description:
- size: lxwxh=150x90x59mm
- color: black and white color available.
- n.W: 0.15kgs
- led: 3pcs led
- uv wavelength: 395-405nm
- adapter in put: 110v-240v 50/60hz
- adapter out put: dc 12v 0.5a
- packing: 40pcs/ctn
- ctn size: 64x34x34cm
- g.W:13kgs
Features:
1. Preset 45 second and 60 second timer.
2. Never need to replace led bulbs.
3. Ergonomic design for comfort
4. Compate design to save table space.
5. (3)2-watt led lights[=6watts]
6. Pro light has consistent power and performance from the first second out of the box through to the 50000 hours.
7. Limited warranty.
Description:
- size: lxwxh=150x90x59mm
- color: black and white color available.
- n.W: 0.15kgs
- led: 3pcs led
- uv wavelength: 395-405nm
- adapter in put: 110v-240v 50/60hz
- adapter out put: dc 12v 0.5a
- packing: 40pcs/ctn
- ctn size: 64x34x34cm
- g.W:13kgs
761 Self Adhesive Foil Suppliers
Short on time? Let Self Adhesive Foil sellers contact you.
