CM series GAC filter is made of catalytic activated carbon, it can remove chloramine and hydrogen sulfide from water effectively. It's also good at removing disinfection by-products such as chloroform and trihalomethanes (THMs).
Specification
CM series GAC granular carbon filter is made of catalytic activated carbon, it removes chloramine and hydrogen sulfide effectively, also good at removal of disinfection by-product like chloroform and THMs. Suitable for areas using surface water as source water and chloramine as a disinfectant.
Features
NSF Certified catalytic activated carbon
High effect on chloramines, sulfide,and trihalomethane
Low turbidity from carbon dust
Rapid dechlorination
Technical data
Maximum temperature: 140F (60C)
Maximum flow rate per 10: 1.06gpm (4L/min)
Caution: Flush for 30 seconds before use. Do not exceed the maximum flow rate to maintain sufficient contact time.
Melt blown (spun polypropylene) filters with 50% lower pressure drop and long service life.
Specification
STRUCTURE
Depth melt-blown filter cartridge is made of pure polypropylene, by phase-in changes on the precision from inside to outside, it maximizes the dirt holding capacity and minimizes the pressure loss. Results in very long service time.
FEATURES
1 High Dirt Hoding Capacity
2 50% Lower Pressure Drop
3 Long Service Life
TYPICAL APPLICATION
1 Water Treatment
2 Corrosive Liquid Filtration
3 Food Industrial
Carbon block filter made of NSF certified coconut carbons.
Specification
POU- point of use
This series of filters can be used for drinking, municipal, and industrial water and liquids filtration, it is designed for Direct-food-related applications, to treat the water intended for direct consumption (drinking and cooking).
Features
1 NSF certified coconut based granular activated carbon
2 High efficiently bound by food grade binder
3 95% initial dechlorination
4 Long service life
5 Low pressure drop
6 All virgin raw material
Technical data
1 Maximum temperature: 140 degrees
2 Maximum flow rate per 10 inch: 1.06gpm (4L/min)
3 Maximum replacement : 14.5psi (1.0bar)
4 Caution: Flush for 30 seconds before use. Do not exceed the maximum flow rate to maintain sufficient contact time.
String wound filter made of pure material and JIS micron rates.
STRUCTURE
String wound filter cartridge consists of multi-hole frames wound closely with textile fibers. Diverse kinds of filtering precision can be realized by controlling the winding density. As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability. JPL series has straight multi-hole from surface to the inner core, which performance a maximum dirt holding capacity and lowest pressure drop.
FEATURES
1 Through holes create real depth filtration
2 Large flow and small pressure loss
3 High dirt holding capacity and long service life.
4 Pure material
MAIN TECHICAL SPECIFICATION
1 Dimension: Outer diameter: 63�±1mm, Inner diameter:28mm or 30mm
2 Maximum operating Pressure: 0.5MPa
3 Temperature: 60 degrees
TYPICAL APPLICATIONS
1 Industrial liquid filtration (High quality PCB & Electro-plating)
2 Strong acid and alkali liquid
3 Syntheti resin & paint
4 Pre - RO
5 Other applications
SF patented string wound high flow type, with OD 6.22" and 1 to 100 micron range.
STRUCTURE
High Flow string wound filter is patented in China by SF Filter. Using multi-holes to make the filter 9 times dirt holding capacity as ordinary string wound cartridges. With O-rings to avoid bypass. 3 grades are available. HFA, HFB and HFC can meet most pre-filtration requirements.
The end cap and dimensions can be customized to meet certain requirments.
FEATURES
1 High dirt holding capacity, long service life
2 No bypass
3 Easy replacement
4 Through holes create real depth filtration
5 High flow rate and low pressure loss
6 Pure, clean and washed material which is same as NSF approved type (HFA).
7 Pure material, suitable for strong corrosion liquids (HFB).
8 Common material, allows lower price (HFC).
NSF certified string wound filter made of washed string, JIS standard micron rates. Swirling flow.
STRUCTURE
String wound filter cartridge consists of multi-hole frames wound closely with textile fibers. Diverse kinds of filtering precision can be realized by controlling the winding density. As the outer bore diameter is larger than the inner one, the filter cartridges have a good deep-level filtering capability. JP series has straight multi-holes from surface to the inner core, allowing maximum dirt holding capacity and lowest pressure drop. The holes are now with slope design (25micron -200micron), creating swirling flow in the filter housing, which prevent particles from settling at the bottom and provide more benifits to the water.
The whole JP washed series filters has been certified by NSF to the standard of NSF/ANSI 42.
FEATURES
1 NSF listed for ANSI 42 standard
2 Through slope holes create real depth filtration and swirling flow
3 Large flow and small pressure loss
4 High dirt holding capacity and long service life.
5 Pure, clean and washed material, no silicon, no fluorescence agent and no oil.
We can provide you with high filtration cartridge filter, wide-pleated space, easy-cleaning design.
Filter material :cellulose paper, spun boned polyester and with treatment,
Top/bottom end cap:open/closed.
1). Air filter ah1183 : replacement for ecolite air element in disposable housing
2). Physical dimensions :
End connection height : 40.64 mm (1.6 in)
End connection od : 177.8 mm (7 in)
Largest housing od : 342.9 mm (13.5 in)
Overall height : 500.89 mm (19.72 in)
It is made from the anti-break organic synthesis fiber in high-powered high melt way; Gradual structure, Use the technology which encrypts gradually the multi-layered; The fiber density increases gradually toward pure air; high filter efficiency; May according to the dust size, prevent them in the different density level; it accommodates many dust more effectively.
Coherent processing, filtering material to pass through soaks the rubber fully, Fully imgrenated media with adhesive treatment makes dust particles unable to pass; uniform diffusion forms laminar flow to have perfect paint spray finish;
The wind surface of the mesh is specially compact, and also put a fishing net to strengthen it ; this structure make the filtering material keep the high filtering efficiency and large dust holding capacity; even more ,it can extend the working life; When uses C-600G and C-560G, besides can assure the good air quality, because of low resistance of the material, it also saves the systems operation cost.
It is at the customersí» choice that the material have the entire coherency, the surface viscosity, dry processing
Conform to European and American classifications for noflammability.(e.g. DIN53438-F1,UL900-class 2 with flameout)
Size:570*370*400mm
Fuction:Boi Filter
Color:Blue
Flow rate:3000-16000L/h(Please tell detail requirements)
How it works?
1. Water inlet: untreated pond water enters the filter through the water inlet.
2. Sewage outlet: the dirt inside the filter is cleaned and discharged out of the barrel.
3. Settling area: under the action of gravity, the settled garbage is concentrated here.
4. Brush filtration: When the unfiltered water flows through the brush, the brush array can slow down the flow rate of the water, so that heavier particles will slowly settle down, and filter out large particles of garbage, and can easily hang the film brush The nitrifying bacteria will convert the ammonia produced by fish decomposing into nitrite.
5. Filter Mat: between its dense pores and softness, it is the most suitable hotbed for cultivating nitrifying bacteria. It can effectively convert nitrite into nitrate without blocking or deforming. It can be reused after cleaning.
6. Biochemical filtration: The bacteria house in the filter basket can help cultivate various anaerobic bacteria, which will convert the nitrate in the water body into nitrogen for sublimation.
7. UV sterilization and filtration: under UV-C ultraviolet radiation with a wavelength of 253.7nm, when the water body flows through the UV lamp, the bacteria, viruses and algae free in the water body will be killed in a short time.
8. Water outlet: the filtered pond water returns to the pond through the water outlet.
Pond Filter Size:500*300*380mm
How it works?
1. Water inlet: untreated pond water enters the filter through the water inlet.
2. Sewage outlet: the dirt inside the filter is cleaned and discharged out of the barrel.
3. Settling area: under the action of gravity, the settled garbage is concentrated here.
4. Brush filtration: When the unfiltered water flows through the brush, the brush array can slow down the flow rate of the water, so that heavier particles will slowly settle down, and filter out large particles of garbage, and can easily hang the film brush The nitrifying bacteria will convert the ammonia produced by fish decomposing into nitrite.
5. Filter Mat: between its dense pores and softness, it is the most suitable hotbed for cultivating nitrifying bacteria. It can effectively convert nitrite into nitrate without blocking or deforming. It can be reused after cleaning.
6. Biochemical filtration: The bacteria house in the filter basket can help cultivate various anaerobic bacteria, which will convert the nitrate in the water body into nitrogen for sublimation.
7. UV sterilization and filtration: under UV-C ultraviolet radiation with a wavelength of 253.7nm, when the water body flows through the UV lamp, the bacteria, viruses and algae free in the water body will be killed in a short time.
8. Water outlet: the filtered pond water returns to the pond through the water outlet.
Anchor Catalyst Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust, and SO2, HCL, NOx, and Dioxins at the same time. We are the Leading manufacturer of hot gas ceramic fiber filter in China
Product Features
1.Resistant to corrosion and to the acid attack, Excellent chemical resistance
2.High filtration velocities
3.Withstand temperatures of up to 1,000C
4.Total resistance to sparks, Non flammable
5. High air permeability
6. High filtration efficiency- Typically 99.9%
7. Can filter dust larger than 1 micron
8. Easy installation
9. Can be used for 5-10 years without replacement
10. Multi-Pollutant Control - Control PM, SO2, HCl, NOx, Dioxins, HAPS With One Single System
Typical Application
Glass furnaces
Biomass boiler
Thermal power platnt
Chemical Industry
Waste incineration
Non-ferrous metal smelting furnaces
Product recovery
Cement kiln
Size Available
60mm O/D * 1500mm Long
150mm O/D * 3000mm Long
150mm O/D * 300mm Long
Anchor Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust. We are the Leading manufacturer of hot gas ceramic fiber filter in China
Product Features
1.Resistant to corrosion and to the acid attack, Excellent chemical resistance
2.High filtration velocities
3.Withstand temperatures of up to 1,000�°C
4.Total resistance to sparks, Non flammable
5. High air permeability
6. High filtration efficiency- Typically 99.9%
7. Can filter dust larger than 1 micron
8. Easy installation
9. Can be used for 5-10 years without replacement
Typical Application
Glass furnaces
Biomass boiler
Thermal power platnt
Chemical Industry
Waste incineration
Non-ferrous metal smelting furnaces
Product recovery
Cement kiln
Size Available
60mm O/D * 1500mm Long
150mm O/D * 3000mm Long
150mm O/D * 300mm Long
Anchor Ceramic Filter Elements, used in Hot Gas Filtration for removal of Particulates and dust. We are the Leading manufacturer of hot gas ceramic fiber filter in China
Product Features
1.Resistant to corrosion and to the acid attack, Excellent chemical resistance
2.High filtration velocities
3.Withstand temperatures of up to 1,000C
4.Total resistance to sparks, Non flammable
5. High air permeability
6. High filtration efficiency- Typically 99.9%
7. Can filter dust larger than 1 micron
8. Easy installation
9. Can be used for 5-10 years without replacement
Typical Application
Glass furnaces
Biomass boiler
Thermal power platnt
Chemical Industry
Waste incineration
Non-ferrous metal smelting furnaces
Product recovery
Cement kiln
Size Available
60mm O/D * 1500mm Long
150mm O/D * 3000mm Long
150mm O/D * 300mm Long
RBCs Filter FIBC450-SE10
RBCs Filter
RBCs filters Manufacturer, red blood cell filter wholesaler
Designed for 1 unit of RBC suspension from 450/500ml of whole blood. Features
Designed for 1 unit of RBC suspension from 450/500ml of whole blood.
High efficiency leukocyte reduction filter (Residual leukocytes
RBCs Filter FIPP450-SE10
RBCs Filter
Leukocyte Reduction Filter
RBCs filters Manufacturer, red blood cell filter wholesaler
Designed for 1 unit of RBC suspension from 450/500ml of whole blood. Features
Designed for 1 unit of RBC suspension from 450/500ml of whole blood.
High efficiency leukocyte reduction filter (Residual leukocytes
RBCs Filter FIRC450-HX10
RBCs Filter
Leukocyte Reduction Filter
RBCs filters Manufacturer, red blood cell filter wholesaler
Designed for 1 unit of RBC suspension from 450/500ml of whole blood. Features
Designed for 1 unit of RBC suspension from 450/500ml of whole blood.
Super high efficiency leukocyte reduction filter (Residual leukocytes
87 Industrial Filters Suppliers
Short on time? Let Industrial Filters sellers contact you.
