Mi2 automobile LED headlights china automobile LED headlights automobile LED headlights
Product parameters: 1. Voltage: DC12V 2. Power: one lamp 28w [56W * 2]; 3. Lumen value (brightness): 3000lm 4. Led Auto Headlights Lamp bead: imported LED lamp bead 5. Color temperature (color): 6500k 6. Service life: > 50000hrs (hour)
Product Name: mi2 automobile LED headlamp Mini LED lamp highlight high and low beam H4Adjust the light type at will adjusting the LED light of the lamp body through the snap ring achieve the ideal light typeNo delay start socket installation plug and play intelligent power failure protection aluminum alloy rust and flame retardant no line no hole
Our company's auto parts category mainly provides high quality led auto headlights, hid bulbs, LED Work Lights, LED daytime running lights and other products for professional production and processing.
Click here for more information on auto parts.
Automobile LED headlight china led auto headlights manufacturer Led Auto Headlights
At night, when the headlight switch is turned on, the seven color mode is covered by the headlight light, showing the white light of our headlight. This is a popular light.You can switch the colorful lights with the melody of the music.
This is a new type of car seven color headlights, which is a combination of daytime running lights (also called angel eyes) and headlights. When the car starts, the seven color mode of the lamp starts, which is equivalent to the daytime running lamp (seven color mode, switch in turn). It can also be controlled through mobile app.You can switch the colorful lights with the melody of the music.
Our company's auto parts category mainly provides high quality led auto headlights, hid bulbs, LED Work Lights, LED daytime running lights and other products for professional production and processing.
Click here for more information on auto parts.
Automobile Laboratory Equipment Can Bus Data Transmission Network System
Mobile stand on four wheels
Training stand equipped
Central control unit
Functioning engine control unit
Control instrument panel
Electronic steering column locking system
Ignition lock, key and immobilizer
Car airbag systems control unit (SRS)
Automobile door central locking control unit
The car door glass lifting mechanism with controls
Training stand ensured the possibility to run diagnostics for all devices installed in the control unit CAN network with automatic help search, including the following diagnostic operations
Control unit identification reading
Ensured the ability of detected systemic error reading / deletion
Ensured the possibility of system parameters control
Ensured the possibility of the control unit coding /configuration, and the engine actuators activation
The stand has a closed structure- no visible system installation elements and sealed electrical circuits, wiring
In training stand included
- Automobile oscilloscope
- Diagnostics equipment
- Network power supply (220 /12V) and a battery (12V)
- CAN maintenance analyzer
Hot Tags: automobile laboratory equipment can bus data transmission network system, China, manufacturers, suppliers, engineering, OEM, ODM, automotive educational training equipment, automatic transmission controller test equipment, Automotive Training Kit, car engine and accessories, Air Conditioning System Compact Type, manual air-conditioning system training bench
When the traditional ignition system is working, the moment the disconnector contacts are separated, sparks will be generated at the contacts and the contacts will be burned. When the spark plug accumulates carbon, it is easy to leak electricity, the secondary electrode voltage cannot rise, it cannot be ignited reliably, and a high-speed misfire phenomenon occurs. The semiconductor ignition system overcomes these shortcomings, has a strong ability to jump, and makes ignition reliable.
(1) An ignition system composed of non-contact breakers composed of electromagnetic, infrared or Hall components is called a non-contact igniter, and its amplifying circuit is divided into a transistor circuit and a capacitor discharge circuit.
(2) The ignition system controlled by the ECU (Electronic Control Unit) is determined by the microprocessor in the ECU according to the signal of the crank angle sensor, so it has no disconnection, only the distributor, and directly controls the ignition coil according to the signal sent by the ECU Turn on and off the primary circuit.
(3) Distributor-Less Ignition is the most advanced ignition system at present. The crankshaft sensor not only has the ignition timing signal, but also the cylinder identification signal, so that the ignition system can The ignition signal is sent at the specified time, which requires each cylinder to be equipped with an independent ignition coil. However, if it is a six-cylinder engine, 1, 6, 2, 5, and 3, 4 cylinders share an ignition coil, that is, a total of three One ignition coil. Obviously, when each ignition coil is ignited, there is always a cylinder that is ignited empty. This point should be noted when testing.
The non-contact ignition system can use low-impedance inductance coils to greatly increase the primary current, make the secondary voltage up to 30kV, enhance the ignition energy to improve the ability to ignite the lean mixture, and improve the fuel economy while reducing exhaust gas Pollution. Distributorless ignition systems are completely electronic devices without mechanical moving parts, completely solving a series of failures caused by cam and bearing wear and contact ablation gap imbalance.
Automobile 6 types ignition system educational model, China, manufacturers, suppliers, engineering, OEM, ODM, auto car equipment, Hybrid Cutaway Engine Display Stand, Automotive Component's Electric Trainer Equipment, training panel, software controlled engine section demo model, ignition starter switch
Auto glass is approximately three to five times stronger than that of ordinary float glass, and although the glass still breaks the way ordinary glass does, the fragments adhere to the interlayer PVB - break but not shatter, so the people will not be injured, we call the interlayer PVB as Safety Net.
Each kit includes:
2 Xenon HID Bulbs
2 Digital HID Ballasts
2 Mounting Brackets
All Necessary Wiring and Connectors*
Installation Manual.
Ballast Specifications:
- INPUT 9-16 V
- NORM 12V
- NORM 3.2A
- INMAX 9.0a
- OUTPUT 35W
- CASE -40 C - +105 C.
Benefits:
- More Light Output- NORM 12V
A 35W HID light source produced up to 3 times the lumens at the light source when compared to a 55W halogen bulbs.
- Greater Visibility
The combination of more light output and whiter color makes for better visibility in most night time driving conditions.
- Longer Life
HID lamps will last, on average over 10 times as long than halogen bulbs.
1. True plug-and-play for most sizes
2. Water-resistant & vibration-resistant system
3. Lifespan: 3, 000 hours
4. Brightness: 2, 500 to 3, 500lm
5. Color temperature: 4300k ~15000k
6. Voltage: 70 to 100v
7. Wiring: high temperature-resistant and high voltage-resistant
8. Cover: crystal glass tube of uv-cat anti-ultraviolet
9. Luminescence way: produced luminous by gases colliding
10.Operating ambient temperature range: -40 to +105 degrees celsius
11.Operating temperature: -40 to 120 degrees celsius
Product: INFOCUS SP-LAMP-038 275W
Brand: INFOCUS
Model NO.: SP-LAMP-038
Work with: IN5102 & IN5106
Delivery time: 2-3working days
Shipment: DHL/UPS/FEDEX
Warranty: 120days after sale.
Dear friends ,Guangzhou Lampschoice Electronics Co., Ltd can offer
1.all brands of original projector lamps with housing
2.all brands of original bare bulbs
3.replacement projector lamps with housing
4.replacement bare bulbs
5.all brands of projectors
6.color wheel for DLP projectors
7.power supplies for projectors
8.all kinds of projector accessories
.
Electricity parameters:
Ballast input voltage :9 ~ 16v
Working voltage :12.6v
Working current :2a
Starting max current: 8a
Power output : 20w
Output temporary max voltage: 23kv
Battery mode :icr18650x3s2p(2200mah)
Battery charge voltage :12.6v f+ 0.1v
Battery lifespan : (charge and discharge times) fª500 times.
1. Poppet valves available to prevent uncoupled leakage.
2. Poppet valves open automatically when coupled, within rated working pressure, to keep the flow expeditely.
3. Critical parts are hardened for durability.
4. Durable ball-locking mechanism holds the mating halves together.
5. Socket and plug are precision machined from solid bar stock.
6. Zj-ycc quick coupling series conforms to the standard of iso5675. Compatible with parker 4000 series, faster nv/ns series.
Zj-ycc quick coupling application:
The zj-ycc quick coupling series widely apply for the industrial joint, such as construction equipment, forestry equipment, hydraulic tools, oil equipment, steel mill machinery, and other industry required hydraulic connection.
PVB which is put between two pieces of common glass, when it is collided with other blocks, the PVB film can offset the compact pressure and don't make the glass shattered and so protect the safety of people, which is mainly used in the field of of automobile, high-building, aviation
