Find Verified Asbestos Fiber Suppliers, Manufacturers and Wholesalers

Carbon fiber fabric
It is made of carbon fiber by woven unidirectional, plain weaving or twill weaving style. The carbon fiber is high strength-to-weight and stiffness-to-weight ratios, and carbon fabric is thermally and electrically conductive and exhibit excellent fatigue resistance. When properly engineered, carbon fabric composites can achieve the strength and stiffness of metals at significant weight savings. Carbon fabrics are compatible with various resin systems including epoxy, polyester and vinyl ester resins. It is widely used as the basic material for aerospace, defence, leisure, automotive products, industry and the medical sector as well as other applications includes building construction repair and strengthening.
General Data
Weaving Style: Unidirectional, Plain, Twill
Input Available: 3k, 6k, 12k Carbon fiber
Weight: 15 0 ~ 600g / m2
Roll length: To be specified
Remark :
1. The above parameters are only in common condition. In case of order, the parameters are subject to the customer's confirmation.
2. CWP : Carbon plain weave fabric
3. CWT : Carbon twill weave fabric
4. CWU : Carbon woven unidirectional fabric
Packaging
Product is manufactured in form of a roll wound on a paper tube and then packed in a plastic film and placed within a cardboard carton. Rolls can be loaded into a container directly or on pallets.
Storage
It is recommended that the carbon fiber fabric are stored in a cool and dry environment. Recommended temperature range of storage is between 10 ~ 30 degree and relative humidity between 50 ~ 75%.
The carbon fiber fabric should remain in the packaging until just prior to use.
Typical Range
Product Code Density (g/m2) Input Tex Fabric Count (ends/10cm ) Tensile Strength(Mpa) Tensile Modulus(Gpa)
Warp Weft Warp Weft
CWP200 200 3k 3k 50 50
CWT200 200 3k 3k 50 50
CWU200 200 12k Y 3500 Y 230
CWU300 300 12k Y 3500 Y 230

Gyfta53 fiber optic cable characteristics:
fiber optical cable
1.Accurate fiber excess length ensures good mechanical and temperature performance




Gyfta53 fiber optic cable brief introduction

The fibers, either of single-mode or multi-mode type, are placed in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A piece of fiber reinforced plastic (frp) locates in the center of core as a non-metallic strength member. The tubes(and fillers) are stranded around the strength member into a compact and circular cable core. An aluminum polyethylene laminate (apl) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin pe inner sheath. After the psp is longitudinally applied over the inner sheath, the cable is completed with a pe outer sheath.


Gyfta53 fiber optic cable pictures:
1.Gyfta53-fiber-optic-cable

Gyfta53 fiber optic cable


fiber optical cable
Gyfta53 fiber optic cable paramters:
fiber optical cable
Gyfta53 fiber optic cable

Wooden drum // special package can be customized.Inspection certificate of fumigation should be notified before production as it will take 7 days from application to approval.

Optical fiber couplers

1. Input / output connector: fc/pc; fc/apc; lc/pc; mu/pc; sc/pc; sc/apc
2. Fiber length: 1: 1 m; 1.5: 1.5 m (customized)
3. Fiber type: 2: bare fiber, 9: 0.9mm loose tube, 3.0: 3.0mm cable
4. Coupling ratio: 01: 1: 99, 02: 2: 98, 50: 50: 50
5. Central wavelength: 13: 1310nm, 15: 1550nm
6. Port: 12: 1*2, 22: 2*2
7. Grade: p or a.

Tlsanli showcases with fiber optic lighting systems are very suitable for the luxury goods, for the arts, for the fashion & artistic industry.
Safety, energy efficient, easy maintenance, water resistance, without uv radiation, superior brightness iare the mainly characters of our showcases

Fiber optic lighting sign

Single-mode


Upc

Apc

Pc


Insertion loss (db)

¡¡¡ì10.2

¡¡¡ì10.25


Return loss (db)

¡y45

¡y50

¡y60

N/a


Repeatability (db)

Il¡¡¡ì10.2 rl¡¡¡ì15

Il¡¡¡ì10.1


Vibration (db)

Il¡¡¡ì10.2 db rl¡¡¡ì15db

Il¡¡¡ì10.2 db


Exchangeability (db)

Il¡¡¡ì10.2 db rl¡¡¡ì15db

Il¡¡¡ì10.2 db


Tensile strength

F200n


Durability

N=1000

fiber optical patch cord
Operation temperature (¡ãc)

-40¡ãc~+80¡ãc


Ferrule material

Zirconia ceramic


Cable diameter (mm)

Ø0.9, Ø2.0, Ø3.0


Inner packing: pp bag // outer packing: carton // special package can be customized.
Notice: this connector would be charged by dimensions when shipped by courier.

High dense space.Ceramic ferrules connector.Low insertion loss.High return loss.Excellent mechanical endurance.High credibility and stability

The 40ch DWDM MUX DEMUX is designed by FIBERWDM, wavelength fromC21 toC60(1560.61nm~1529.55nnm), in accordance with the ITU-T G.694.1 100GHZ grid, it maximizes the capacity of the C-band range.
The 40ch DWDM with 1310nm port is totally passive DWDM device, and support low insertion loss( wavelength ports 3.5dB; 1310nm port 0.8dB).And it conjunct with The DWDM amplifiers and DCM device, the 40ch DWDM transfer system can support a long distance transmission.

1.Standard:GB5023.6-2006 IEC60227-6:2001
2.Fire worked stranded bared copper wires or tinned coppr wires
3.PVC jacket and insulator
4.Passed national complusory .


500metres /rool, in drum.

1.Standard:GB5023.6-2006 IEC60227-6:2001
2.Fire worked stranded bared copper wires or tinned coppr wires
3.PVC jacket and insulator
4.Passed national complusory.


500metre/roll with drum.

Micro Pore Optic (MPO) is a kind of grazing incidence optical element, which can focus high-energy rays, such as X rays, ultraviolet light. MPO is a type of thin slice glass with porous structure. MPO is made up of millions of square shaped pores. The micro pore size is in micron scale and the surface of their inner wall has very low roughness. The shape of MPO can be divided into two classes: plane and sphere. The planar MPO can converge to the astigmatism, while the spherical MPO can converge to the parallel light. So far, in all known optical components of X ray, MPO not only guarantee the large field of view and high resolution, but also has the smallest volume and weight. In order to get the best focusing effect, we can coat surface of the micro pores inner wall with increasing reflective film, different application bands using the different film materials.

Specifications:

Pore size(microns):1020100customized
Packing: square packed radially packed
Boundary dimension: 50mm50mm;60mm, customized
Thickness(mm): 123customized
Shape: plane sphere
Radius of curvature(mm): 100150750others tbd
Film materials: Aluminium Nickelcustomized

Square hole , Focus , Lightweight
Large field of view
High resolution

Applications:

Aerospace navigation
Deep-space detection
X-ray astronomy
Safety inspection system
Military reconnaissance
X-ray imaging/counting detection

1)Country of origin: Germany
2)Material: is an asbestos-free gasket material. It consists of aramide fibers, inorganic fillers and other asbestos substitutes that are resistant to high temperatures.
3)Application: for DIN and ANSI flanged joints, apparatus, pumps, fittings and pipelines in industrial plants ;
for fittings with very narrow sealing surfaces, e.g. in gas and hot water units, solar panels, convection radiators and couplings, etc. ;for sealed joints in IC engines subject to high mechanical and thermal stress (oil filters, intake manifolds, water, fuel & vacuum pumps, etc.for transmissions, gearboxes, refrigerating & air compressors, etc. ;Since AFM 34 is physiologically safe, it is particularly suitable for use in contact with drinking water & foodstuffs, and for sealing highly pure, pollutant-sensitive products such as paint bases, vitamins, etc.
4)It can be made to specific gasket according to drawing, dimensions supplied, or other arrangement.