This testing machine is according to iec61058.1, iec60884 and iec60669.1 standards to design, it is suitable for household and similar fixed electrical installations switch capacity and normal operating life test.
Its aim at checking the switch whether is able to withstand the mechanical damage and electrical fatigue damage in normal use, and if there are adhesion phenomena or prolonged closed or disconnected phenomena occur, inspect whether there are excessive wear and other harmful consequences with it. It is the special equipment for switch mechanical life machine and electrical life endurance tester.
Parameters
1.Power supply: ac220v10%/50hz or 110v/60hz
2.Station : stations, 1 and 2 station are used to perform switch test (rocker switches and push button switches can switch test, 3 and 4 station are used to perform the plug and socket testingm, all 4 workstation can work independently )
3.Operation interface: 7-inch color lcd touch screen
4.Drive mode: pneumatic, 58kg/cm2
5.Control systems: plc control
6.Preset times: 0999999s, can be preset
7.Test times: displays the current number of trials
8.The on time: 099.9s, can be preset
9.The off time: 099.9s, can be preset
10:travel time: mechanical adjustment, take the cylinders maximum stroke position
11.Test rate: adjustable valve, about 0.2s / times
12.Atmospheric pressure : 80106kpa
13.Environment temperature:540
14.Relative humidity : ( 2090)%rh
15.Working place: no violent shaking, vibration, electromagnetic interference, no dust,
Non-explosive and corrosive gases, good heat dissipation
16.Dimensions and weight : l*w*h=1180*750*750mm, 105kg
Products information:
The series of horizontal-vertical flame test apparatus are designed and manufactured according to the standard and related requirement of ul94, iec60695-11-2, iec60695-11-3, iec60695-11-4, iec60695-11-20. It simulates the influence of early-stage flame when there is a fire around the electric and electronic products, so that to judge the igniting danger degree.
The plugs are subjected to a compression test at the apparatus, the temperature of the pressure plate, of the base and of the specimens being (23 2) c and the force applied being 300 n.
It is used for the testing of IPX7, it also provide water and electrical automatic control for IPX1~6` waterproofing test.
Parameters:
1. Suitable for IPX1-6 water proof and UL dripping water?IPX7 water immersion test and automatic control of the whole waterproof test system;
2. Water supply method: constant temperature water supply, constant flow water supply, constant pressure water supply.
3. Water supply control process: After user preset the water flow value and water pressure value on the touch screen, electronic meters or digital pressure gauge real-time monitor the current values, read the values into PLC through the data conversion, then automatically adjust the rotational speed of pump through the frequency converter.
4. There are large flow and small flow two ways water supply.
5. Large flow water supply:
(a) It is applicable to IPX5~IPX6 strong water spray test and water injection of IPX8
(b) Flow range: 10~100L/min
(c) Flow accuracy: ±0.5L/min
(d) Flowmeter: Turbine flowmeter
(e) Water pump: Stainless steel centrifugal pump
6. Small flow water supply:
(a)It is applicable to IPX1,IPX2,IPX3,IPX4 and UL waterproof test
(b)Flow range: 1~10L/min
(c)Flow accuracy: ±0.5L/min
Flowmeter: Turbine flowmeter
(d)Water pump: Stainless steel centrifugal pump
(e)Pressure range: 0.1-3Kg/cm²;
(f)Pressure digital display: Adopt digital pressure gauge;
7. Water storage tank:
(a)It is applicable to water storage of IPX5~IPX6 strong water spray test,water injection of IPX8, IPX7 immersion
(b)Volume: 500L
(c)Dimension: L600mmXW660mmXH1400mm
(d)Observation window: toughened glass window
(e)Observation window dimension: W200mmXH1250mm
(f)Depth gauge: stainless steel
(g)Depth gauge height: 1300mm, accuracy 1mm
(h)Liquid level control: float switch + overflow pipe
8. Control Cabinet:
(a)Flow detection: flow signal feedback through electronic flowmeter
(b)Flow setting: set on touch screen
(c)Temperature detection: PID
(d)Controller: Mitsubishi PLC
(e)Friendly interface: 7 inch, color touch screen
(f)Control function: constant flow water supply, constant pressure water supply,vertical drop rain motion control, oscillating tube rain motion control, rotation table motion control and test time control.
(g)Protection function: leakage protection, overload protection, short circuit protection.
9. Water supply pipeline: water supply of this equipment using PVC hose, it is assigned to each device according to the site layout , and controlled by the electromagnetic water valve.
10. Install the drainage valve on the water supply pipeline, it will automatic discharge the water after the test is completed
11. Filter: stainless steel shell, fine filter element.
12. Machine body material: aluminum alloy profile.
13. Appearance size(WXDXH):1400X750X1600mm;
It is used for checking tensile strength of the central heart of lift cables.A sample of the completed cable, 1 m long, shall be weighted. After removal of all covering and cores over a distance of about 0.20 m at both ends of the sample, the central heart including the strain-bearing centre shall be subjected to a tensile force, corresponding to the mass of 300 m of cable. The force shall be applied for 1 min.
Parameters(mm):
Maximum test force 2000N
Test force display range 0~500kg
Grading test force No grading of the whole process, the entire resolution unchanged
Test force measurement accuracy Is superior to ±1% of the display value
Displacement resolution 0.01mm
Accuracy of displacement measurement Is superior to ±1% of the display value
Moving speed range of cross beam 25mm/min~500mm/min Stepless speed regulation, can set speed arbitrarily
The control precision of the displacement speed Is superior to ±1% of the display value
Tensile space 0~1000mm
Dimension 500mm×500mm×1600mm, weight:100kg
Power supply 220V?50Hz?1000W
It is suitable for all types of portable lamps and similar electrical appliances products for mechanical stability test, the test sample is placed on countertops, to assess its mechanical stability through different tilt angles.
Working condition:
Environment:0¡æ¡«+40¡æ;Working power supply:220V¡¨¤10%,50Hz
Technical index:
1.Tilt angle:0-30¡ãstepless adjustable,electric control,encoders intelligent digital display; equipped with angle measuring instrument calibration, easy to operate, high accuracy angle,precision ¡¨¤ 0.5 ¡ã.
2.The maximum weight load:50kg,(load can be improved as per customer requirements)steel plate surface is treated by painting;
3.Motor speed: 0.50r/min (frequency control for optional),there are reliable earthing contact and power plug connector on the test bench of accessible metal surface;
4.Table diameter:800mm;
5.The test bench with stable whole structure,and beautiful appearance.
BMW GT1
Introduction
GT1 could diagnose all types of BMW.It could read code,clear code,data flow,action testing,fault guiding and special expert functions.It is much cheaper than the original Group Tester One,but it has 90% of its function.Self-contained diagnosis computer for the workshop,reception and final inspection.
Features
1.DK yellow multiplexer could program BMW which was made before 1999,like E53,E38 and so on when it is connected with SSSr2.
2.DK could diagnose all BMW vehicles which were made before the end of 2006 through DIS software.
3.DK2.1 test E65 whole vehicle only needs 5 minutes.
4.Software self-upgrade function.
5.English,German&Turkish are available
Standard config:
1.DK yellow multiplexer x 1
2.LAN cable x 1
3.OBD-II diagnostic cable x 1
4.20pin cable x 1
5.Mainframe x 1
Software
1.Diagnostic Software:DIS
2.Maintenance Data:TIS
3.Circuit diagram:WDS
4.Accessories Data:ETK
SSS
Info
The "SSSR3" is the new version of the "Software Service Station SSS" and "SSSR2" which has been introduced in the authorised workshops of BMW AG wordwide since early 2003. The "SSSR3" is virtually identical to the "SSS" and "SSSR2" in terms of visual appearance and component configuration.
It is an addition to the "DISplus" and "Group Tester One(GT1)" diagnostic systems.
Together with the "Optical(test) and Programming System Ops it provides an efficient and versatile platform for the programming individualisation and encoding of BMW vehicles.
Features
1. Soft ware self-upgrade.
2. CPU: P4 3.0, support Dual Core.
3. High speed serial-port hard disk, ensure the program speed.
4. SSS original main board, give you the stable and safe programming circumstance.
5. The whole car's 90% programming only needs 2 minutes.
6. Can diagnose of BMW after 2007 is available for OPS
7. OPS is the necessary tool for all BMW & MINI BMW's programming
8. All BMW & MINI BMW's programming, the whole car's codes setting and individuation set up is available for SSS.
9.English&Chinese are available.
Configurations:
1.SSS PC host
2.SSS BASE DVD + SSS PROGRAM DVD V33.
FORD IDS VCM
Info
VCM has diagnosis, coding and matching functions for Ford&Mazda and Landrover&Jaguar vehicles. It also has maintenance and accessories data software.
Features
1. Convenient and quick to diagnoses
2. Complete maintenance and accessories data made work easily
3. Several languages are available
Standard Config:
1.Diagnoses transceiver-1pc
2.OBD line-1pc
3.USB line-1pc
Introduction
It realizes all the functions of official factory blenz star2000: reading out and
Erasing trouble code; reading the real-time data of sensor and actuator;
Coding and programming. It applies the latest high-tech central gateway
System of car model 221/211 and 203 with software version updated to july of
2008, can enter all the blenz cars, such as autobus truck, saloon car, sports
Car, smart car and so on.
Configuration
- multiplexer
- 16+pin obd ii cable
- 38+pin cable
- 14+pin cable
- 4+ pin cable
- rs232 to 485 communication cable (navigation port)
- harddisk
- demo dvd
Function:
Reading trouble code
Erasing trouble code
Live-data, adaptation
Component testing
Maintenance information consultation
Component location diagram
Wiring diagram.
Coding the new ecu.......
Das:
Concise interface and straightforward operation with ibm high-quality
Computer can realize the quick and accurate code reading and the whole car
System testing.
Wis net:
Supply the whole view of the wiring diagram in a car, component location
Diagram and maintenance method. What you do is to enter the chassis
Number, and then you will get the manufacture data, engine configuration
And the car model -----all in detail.
Star finder:
Component location diagram for colorized
Bmw gt1 is offered to the aftermarket in the same specification that is currently supplied to bmw franchised dealers. It is special-purpose tool of bmw series. Gt1 is supplied with a pentium based laptop pc on a windows platform connected to a high specification communications and measurement interface.
Gt1 can complete coverage of all bmw systems, one thing that can only be done using the gt1, this function is called electronic control unit (ecu) programming and configuration. Many of the original electronic systems on modern vehicles can now be re programmed using software; historically any changes to rectify software problems would involve a new ecu which would be purchased from the parts department and that is the only way that the independent market today is able to overcome these problems. The bmw gt1 system allows you re programme all bmw car ecu's to fix software or to install a blank ecu to a repaired vehicle. Gt1 is the only system that allows you to do this and is absolutely essential if working on freelander , the gt1 is also the only system that provides all diagnostics and programming for the very latest bmw launched this year.
Bmw gt1 software kit comprises of five system , tis system .Dis data system ; diagnosis system .Measuring system and manangement system . You can to test and check data information same time in gt1.
Test function :
Read faulty code , clear faulty code , data stream .Activate state, programming , component test , maintenance data information , components location , wiring diagram etc..., tis and dis are supply all of system diagram of all of bmw car, components location, maintainence method and coding information etc. Can do completely of bmw car system.
1. Gt1-scan pro mainbody
2. Network cable
3. Gt1 for vehicles with 20pin diagnostic connector
4. Gt1 for vehicles with obii diagnostic connector
It realizes all the functions of official factory blenz star2000: reading out and
Erasing trouble code; reading the real-time data of sensor and actuator;
Coding and programming. It applies the latest high-tech central gateway
System of car model 221/211 and 203 with software version updated to july of
2008, can enter all the blenz cars, such as autobus truck, saloon car, sports
Car, smart car and so on.
Configuration
- multiplexer
- 16+pin obd ii cable
- 38+pin cable
- 14+pin cable
- 4+ pin cable
- rs232 to 485 communication cable (navigation port)
- harddisk
- demo dvd
Function:
Reading trouble code
Erasing trouble code
Live-data, adaptation
Component testing
Maintenance information consultation
Component location diagram
Wiring diagram.
Coding the new ecu.......
Das:
Concise interface and straightforward operation with ibm high-quality
Computer can realize the quick and accurate code reading and the whole car
System testing.
Wis net:
Supply the whole view of the wiring diagram in a car, component location
Diagram and maintenance method. What you do is to enter the chassis
Number, and then you will get the manufacture data, engine configuration
And the car model -----all in detail.
Star finder:
Component location diagram for colorized
It realizes all the functions of official factory blenz star2000: reading out and
Erasing trouble code; reading the real-time data of sensor and actuator;
Coding and programming. It applies the latest high-tech central gateway
System of car model 221/211 and 203 with software version updated to july of
2008, can enter all the blenz cars, such as autobus truck, saloon car, sports
Car, smart car and so on.
Configuration
- multiplexer
- 16+pin obd ii cable
- 38+pin cable
- 14+pin cable
- 4+ pin cable
- rs232 to 485 communication cable (navigation port)
- harddisk
- demo dvd
Function:
Reading trouble code
Erasing trouble code
Live-data, adaptation
Component testing
Maintenance information consultation
Component location diagram
Wiring diagram.
Coding the new ecu.......
Das:
Concise interface and straightforward operation with ibm high-quality
Computer can realize the quick and accurate code reading and the whole car
System testing.
Wis net:
Supply the whole view of the wiring diagram in a car, component location
Diagram and maintenance method. What you do is to enter the chassis
Number, and then you will get the manufacture data, engine configuration
And the car model -----all in detail.
Star finder:
Component location diagram for colorized
Motors used as a part in the equipment, electrical, machine yy and yjf series of micro-motors which are applied to household appliances such as refrigerator freezer, microwave oven, warm-air blower, ventilation fan, oven, fresh air machine.
