Characteristics:
1. Loading section equipped with stainless steel water tank and spraying device.
2. Easy operation and maintenance: top frame supported by high strength screw can be elevated by 400mm as a whole for convenient cleaning and maintenance.
3. Drying section: blower packed with muffle cotton can largely minimize the noise. The air filter screen fixed across the entrance of blower can reduce dust during the drying process and is easy to remove for cleaning. Air blade can dry glass panel in a short time with high speed cold air without heating. Pressing roller is used for top oblique air blade to ensure smooth transmission of small glass panels.
4. Conveyor device: bevel gear is adopted for steady and synchronous transmission.
5. Water circulation system: water sprayed out to the brushes will return to the tank and be reused by circumfluence thus save water consumption.
6. Control system: all function buttons are separated and clearly marked on the control panel. Conveyor device uses transducer to adjust the transmission speed. Glass thickness and transmission speed will be showed on the digital display.
With advanced laser micromachining process, we supply any geometric cut sapphire windows and substrate
Min precision of +/-5micron
Max size: 200*200mm
Min holes/slots width: 50micron
Max depth-diameter ratio of micro holes: 20:1
Min micro holes: 30micron
We could also provide other kinds of micro machining jobs in sapphire, min features @ tens of microns
Min hole size: 30micron
Max thickness: 1mm
Max depth-diameter ratio: 20:1
Hole precision: 5micron
Smooth sidewall, no chipping, no burs
Taper adjustable
Sapphire crystal is widely used in semiconductor
(mocvd epitaxial gan substrate), watches, medical science, communications,
Lasers, infrared, electronics, measuring instruments, military,
Aerospace and others high-tech industry.
Geometric cutting or micro drilling of
Quartz glass, and many other kinds of glass, especially for the custom
Shape/design cutting of thin glass (less than 1mm) , with very high precision
Requirements.
We could make shinning sidewall with no chipping at the cutting edge.
Precision: 20micron
Min hole size: 30micron
Max thickness: 6mm
Max depth-diameter ratio:100:1
Hole precision: 5micron
Smooth sidewall, little chipping, no burs
Straight hole, no taper or positive taper available if required.
1kg
576 Glass Machinery Suppliers
Short on time? Let Glass Machinery sellers contact you.
Feature:
This machine adopts vacuum suction tray glass clamping and stepless regulator, suitable for peripheral and bevel grinding of different size of circular flat glass or which having a shape similar to square. Rough grinding, fine grinding and polishing can be completed in one process. (compared with single-arm machine, it eliminates the trouble of fine grinding, polishing wheel changing and increasing processing speed.)
Technical specifications:
1. Glass thickness: 4 ~ 20mm
2. Bevel angle: 0p~ 20p
3. Glass thickness: max: 1500 x 1500mm min: 400 x 400mm
4. Power: 8kw
5. Weight: 2000 kg
6. Size: 2000 x 1500 x 1500mm.
The machine is controlled by PLC with touch screen. It is equipped with three automatic sandblasting guns, which controlled by programs, and also one more gun for manual operation, so that it can be available for both bulk production and single piece processing.
SG-3000-1DD is a professional equipment to produce laminated glass without autoclave. It is able to produce various laminated glass thanks to the advantages of this machine and specific film. You can insert the silk, paper, plastic film, metal mesh, fabrics or other films into normal glass sheets in order to produce decorative and functional laminated glass.
The heating elements would be placed in horizontal direction, which means to be parallel with glass sheet. The heating would be achieved with electricity heating tube, and evenly be distributed by assistance of two air blowers. In this case, it can quickly reach to the target temperature, so that to save a lot of time and power consumption.
The mechanical parts are applied with strengthen steel for heavy glass, which allow to have a full loading of 40mm thick of glass, it is able to produce both the single piece or multi pieces by means of different combination so that the production capacity would be increased for double or triple. The mostly equipment would be placed inside of furnace with good ventilation, and easily for maintains, thus, it obtains beautiful shape and safe purpose.
The control system applies the PLC with touch screen; all the parameters can be easily and directly set trough finger touch. The temperature would be regulated by means of changing the value of voltage, so that it can have accurate temperature control.
The furnace door would be opened or closed by pneumatic or electricity power; thick insulating materials; high tear-resist silicon rubber bags; high temperature-resist bear for pulling. CE regulated electronics and wiring; power-strengthen vacuum pump, well-know brand electronic¡ all above basic elements ensure the quality and stability of machine.
SG-3000-2DD is a professional equipment to produce laminated glass without autoclave. It is able to produce various laminated glass thanks to the advantages of this machine and specific film. You can insert the silk, paper, plastic film, metal mesh, fibre or other films into normal glass sheets in order to produce decorative and functional laminated glass.
This series product is flat glass and bent tempered glass production combined vertical and horizontal steel furnace, mainly for the production of architectural curtain wall, various modes of transport windshield, side windows, shower room, home appliances, with flat or bent tempered glass production.
ÐͺÅModel ×î´ó¼Ó¹¤³ß´çMax.Bending
Size(mm) ×îС¼Ó¹¤³ß´çMin.Bending
Size(mm) ×îС¼Ó¹¤°ë¾¶Min.processing radius(mm) ÇúÂʰ뾶Curvature radius(mm) ºThickness(mm) ²úÁ¿Capacity
(batch/h)
QYP-H2010 1000¡Á2000 400¡Á300 ¡Ý450 4-12 16
QYP-H2012 1200¡Á2000 400¡Á400 ¡Ý600 4-12 16
QYP-H2410 1000¡Á2440 500¡Á500 ¡Ý450 4-12 16
QYP-H2412 1200¡Á2440 500¡Á500 ¡Ý600 4-12 16
QYP-Z3620 3660¡Á2000 400¡Á400 600 450 4-12 16
QYP-Z3624 3660¡Á2440 400¡Á400 850 350 5-12 16
QYP-Z4224 4220¡Á2440 600¡Á600 850 350 5-12 16.
Note: The output of the largest piece of glass in accordance with 5mm single-station production of 100% finished product rate. Flat steel production may refer to the former flat steel-based series, will not produce changes.
Mainly used in the production of various modes of transport windshield, side windows, shower room, construction, household appliances and so on with the production of curved toughened glass.
Note: The table dimensions are in millimeters as a unit, yield 80% according to 5mm glass loading rate was 100% finished product rate, the glass can cause changes in the thickness of the scope of production change.
Use of forced convection heating section from top to bottom, so that the upper and lower surface of heated evenly, in thermal efficiency also has a big improvement. Mainly for the production of construction, decoration, household appliances, industrial instruments such as using high-grade flat glass.
Note: The table dimensions are in millimeters as a unit, yield 80% according to 5mm glass loading rate was 100% finished product rate, the glass can cause changes in the thickness of the scope of production change.
X6.11S glass (crystal) mosaic beveling machine with dual dovetail national patent original beam before the elevator, equipped with high-precision grinding ABB motor, the unique design of the front and rear plates, so that machine superior performance, both can be processed into a little 15mmX15mm of glass mosaic and glass wide variety of more than 15mm long (to create new industry standards), the processing speed is more than 5 meters per minute, regardless of efficiency or yield have led the industry. Can be processed more than 40mm wide bevel, and five, seven, nine multi-stage bevel is KTV glass decoration, fight mirror, home decoration, furniture, sanitary ware the best choice, worthy of the name-- the real King of glass beveling machinery.
Pneumatic clamping of the glass sheet during the drilling operation of Opposite drilling head.BZ0213 glass drilling machine is equipped with a glass supporting table.
Major Technical Specification
Drilling Hole Diameter 4-130(mm) Glass Thickness 2-20(mm)
Space Between Drilled Hole Center And Vertical Post 1050(mm) Total Power 1.7(kw)/2.2(kw)
Dimension 1.65x2.6(M) Weight 900(kg)
