IMAGINE a quartz stone color with a natural stone look and high hardness as it features. It might be hard to imagine 10 years ago but now it quite a trend that more kitchen builders and designers favor quartz stone with marble look. This kind of quartz stone, Bestone calls it VEINED.
A veined quartz stone is not trying to compete with natural stone, but replace it.
Slab Size:3230*1630mm/3030*1430mm
Thickness:12/15/20/25/30mm
Cut-to-size:400*400mm, 600*600mm, 800*800mm and other customized sizes
309 Marine Engines Suppliers
Short on time? Let Marine Engines sellers contact you.
1.The product can display various of items in a limited space , makes the space uses effectively.
2.We can design and make according to each customer's requirement.
3.Our company have 10 years experiences,we can provide one step service,design,production and packaging.
(1) Grade 301 Good ductility, used for molded products. It can also be hardened by mechanical processing. Good weldability. Wear resistance and fatigue strength are better than grade 304 stainless steel, used in products such as springs, steel structures, wheel covers.
(2) Grade 302:The corrosion resistance is the same as grade 304, and the strength is better due to the relatively high carbon content.
(3) Grade 303:It is easier to cut than grade 304 by adding a small amount of sulfur and phosphorus.
(4) Grade 304: It is a stainless steel that is non-magnetic and cannot be changed by heat treatment. The standard composition is 18 % chromium plus 8 % nickel. Used in products such as: corrosion-resistant containers, tableware, furniture, railings, medical equipment, some mobile phone frames.
(5) Grade 304L:It has the same characteristics as grade 304, but with low carbon, it is more resistant to corrosion and easy to heat treatment, but has poor mechanical properties. It is suitable for welding and products that are not easy to heat treatment.
(6) Grade 304N:With the same characteristics as grade 304, it is a nitrogen-containing stainless steel. Nitrogen is added to increase the strength of the steel.
(7) Grade 309:Better temperature resistance than grade 304.
(8) Grade 309S:With a large amount of chromium and nickel, it has good heat resistance and oxidation resistance, and is used in products such as heat exchangers, boiler components, and jet engines.
(9) Grade 310S:Contains the most chromium and nickel, so it has the best heat resistance and oxidation resistance. It is used in products such as heat exchangers, boiler components, and electrical equipment.
(10) Grade 316: After grade 304, the second most widely used steel grade, mainly used in the food industry and surgical equipment, the addition of molybdenum gives it a special structure that is resistant to corrosion. Because of its better resistance to chloride corrosion than grade 304, it is also used as "marine steel". SS316 is usually used in nuclear fuel recovery units. Grade 18/10 stainless steels generally also meet this application level. Especially used in chemical, seaside and other corrosive environments, ship assembly, building materials.
(11) Grade 316 L: Low carbon, so it is more resistant to corrosion and easy to heat treatment. It is used in products such as chemical processing equipment, nuclear power generators, and refrigerant storage tanks.
(12) Grade 321:Similar to grade 304, except that the risk of corrosion of the material weld is reduced due to the addition of titanium elements, suitable for welding. Used in products such as brewing equipment, steam pipes, aerospace parts.
(13) Grade 347 The stabilizing element niobium is added and is mainly used for welded parts used at high temperatures.
inconel625 is an alloy grade with a density of 8.4 g/cm3 and a melting point of 1290-1350C. It has excellent corrosion resistance to inorganic acids and has excellent corrosion resistance to various corrosive media in oxidizing and reducing environments.
Alloy 625 exhibits excellent corrosion resistance in many media. Excellent resistance to pitting, crevice, intergranular and erosion in chloride media
Inconel 625 is a high-temperature alloy with excellent corrosion resistance and high-temperature strength, commonly used in fields such as aerospace, energy, chemical industry, and marine engineering. The following are the common national standard designations for Inconel 625:
American standard designations: UNS N06625, ASTM B446, ASTM B564, ASTM B443, ASTM B446, AMS 5599, AMS 5666, AMS 5837, ASME SB446, ASME SB443, ASME SB446, ASME SB564. European standard designations: EN 2.4856, EN 10216-5, EN 10250-4, EN 10253-4, EN 10263-4, EN 10272, EN 10297-2, EN 10302, EN 10312, EN 10314, EN 12266-1, EN 12560-6, EN 13480-3, EN 13480-5, EN 13544-2, EN 1592-4. German standard designations: DIN NiCr22Mo9Nb, DIN 2.4856, DIN 17744, DIN 17752, DIN 17754, DIN 17751. Japanese standard designations: JIS NCF625, JIS G4902, JIS G4941, JIS G5502, JIS G5122. Chinese standard designations: GB/T UNS N06625, GB/T 14992, GB/T 15001, GB/T 15003, GB/T 15004, GB/T 21833
We can provide the following the form:Inconel625 alloy coil; Inconel625 alloy strip;Inconel625 alloy plate; Inconel625 alloy sheets; Inconel625 alloy tube; Inconel625 alloy pipe;
Inconel625 alloy flat; Inconel625 alloy bar
Monel 401 has excellent strength and plasticity, and has good pressure processing performance in both cold and hot states. It is a corrosion-resistant alloy with large dosage, wide application and excellent comprehensive performance. The alloy has excellent corrosion resistance in HF and F2 media, and is one of the few important materials that can withstand hydrofluoric acid. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. A kind of Monel alloy, its alloy structure is a high-strength single-phase solid solution, 3 a nickel-based alloy similar to Monel 400, and the corrosion resistance of the metal is fundamentally obtained by hindering the migration of charged particles through the discharge process of hydrogen ions. Obtained, the addition of 30% Cu by mass fraction minimizes the corrosion rate of TH, Ni in F, Cl and other halogen element ionic media, and the higher the Cu content, the better the resistance to sulfuric acid and phosphoric acid. Adding mass fraction to Monel 401 55% Cu improves the corrosion resistance of the alloy in reducing acids.
Application fields:
Wirewound Resistors
bimetal contact
Electrical and Electronic Applications
Marine Engineering
Chemical and Hydrocarbon Processing Equipment
petrol and fresh water tanks
Distiller
degas heater
Boiler feed water heaters and other heat exchangers
Valves, pumps, shafts, fittings and fasteners
Industrial heat exchanger
Chlorinated solvents
Crude distillation tower
We can provide the following the form:Monel alloy401 coil; Monel alloy 401 strip;Monel alloy 401 plate; Monel alloy 401 sheets; Monel alloy 401 tube; Monel alloy 401 pipe;Monel alloy 401 flat; Monel alloy 401 bar
BST Quartz Co., Ltd. is an outstanding developer and manufacturer of quartz stone slabs and tiles with more than eight-year’s professional experience starting from 2004. Boasting a dedicated team of 150 members devoting to R & D, production, marketing and after-sales service for the quartz stone products and covering an area of 50,000 Sqm, at present we have three sets of fully automatic production lines and another one being under construction which enable us to achieve the production capacity more than 1,000,000 Sqm per year. We have our own fabricating workshop for quartz countertops with perfect workmanship and finishing.
As the pioneer and leader in the industry, we have been exploring and developing the overseas markets ever since the beginning, with 100% of our products been sold to Hong Kong, Australia, Canada, USA, Europe, Korea, Saudi Arabia, Middle East, South America, and so on.
------------------------------------------
Our Advantage
1). Quality Standard: 100% Export Standard and Environmental Friendly.
2). Extremely Qualified Products. 12-Year Warranty.
3). Capability: 3 Production Lines. 1,000,000 SQM per Year.
4). Particular R&D of Quartz Stone. Very Close to Latest International Trend.
5). 100% for Export. Professional & Dedicated Export Services and 24+7 Ready for Communication.
------------------------------------------
We have different sizes and collections available, and customized services are provided.
Ingredient
Natural Quartz 93% - 94% (purified)
Unsaturated polyester resin
4% - 5%
Color and antibiotic substance 2%
Slab Size
3000*1400mm & 3200*1600mm
Thickness
12, 15, 18, 20, 25, 30mm
Cut-to-size
400*400mm, 600*600mm, 800*800mm and other customized sizes
MOQ
150 SQM per Color/Thickness
Lead Time
15 to 30 days depending on the order quantity
>Material selection of high quality cold-rolled steel sheet, electrostatic spray surface, stylish, sturdy, easy to use
>Inside the cable fixtures, splice and clamps
>Fully enclosed, protecting
>Suitable for outdoor armored, indoor soft cable
>Standard cell size, 19 inches in width, can be mounted both distribution frame cabinet/rack can also be used with equipment rack
>Structure the use of thicker passivation of galvanized cold rolled steel plate or surface coating technology, adapter works with the original Japan import ceramics core, guarantees excellent mechanical and optical properties
>Combines the advantages of the optical fiber distribution box, also available as cable terminal box; can be individually assembled into optical fiber distribution frame, also available with digital distribution units, audio accessories, bunding in a cabinet/rack which constitute an integrated distribution frame
>Flexibe configuration, installation and simple to use, easy to maintain, easy to manage, it is essential for line fiber/jumper fiber/splice fibr/optical fiber of the small and medium size communication room.
 communication engine room, jumping fiber, cable and splice one access the essential equipment
Technical parameters
>Several coupled interfaces
>Compact Optical is used for fiber splice, optical adjustment, cable protection and so on
Inconel 718 alloy is a precipitation-hardening nickel-chromium-iron alloy containing niobium and molybdenum. It has high strength at 700 C, good toughness and corrosion resistance in high and low temperature environments. The delivery condition can be solution treated or precipitation hardened.
No matter in high temperature or low temperature environment, Inconel718 alloy has excellent resistance to stress corrosion cracking and pitting corrosion. Inconel718 alloy is especially excellent in oxidation resistance at high temperature.
Inconel 718 is a high-temperature alloy with excellent corrosion resistance and high-temperature strength, commonly used in aerospace, energy, chemical, and marine engineering fields. The following are the common national standard designations for Inconel 718:
US standard designation: UNS N07718, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5596, ASTM B637, ASTM B670, ASTM B906, ASTM B983, ASTM B655, ASTM B751, ASME SB637, ASME SB670, GE B50TF15, GE B50TF14, GE B50TF14E, GE B50A714, SEW 555. European standard designation: EN 2.4668, EN 10216-5, EN 10250-4, EN 10263-4, EN 10269, EN 10302, EN 10305-1, EN 10308, EN 10312, EN 10314, EN 12266-1, EN 13480-5, EN 13544-2, EN 14456. German standard designation: DIN NiCr19NbMo, DIN 2.4668, DIN 17742, DIN 17754. French standard designation: AFNOR NC19FeNb, AFNOR NC 19 Fe Nb. British standard designation: BS HR 51, BS HR 52, BS HR 601, BS HR 602, BS HR 605, BS HR 506. Russian standard designation: Ã�?Ã�?Ã�¡Ã�¢ Ã�ÂÃ�?678, Ã�?Ã�?Ã�¡Ã�¢ 5632-72, Ã�?Ã�?Ã�¡Ã�¢ 9940-81, Ã�?Ã�?Ã�¡Ã�¢ 14955-77, Ã�?Ã�?Ã�¡Ã�¢ 22897-86.
Note: Standard designations may vary depending on the different standard organizations or countries.
We can provide the following the form:Inconel718 alloy coil; Inconel718 alloy strip;Inconel718 alloy plate; Inconel718 alloy sheets; Inconel718 alloy tube; Inconel718 alloy pipe;
Inconel718 alloy flat; Inconel718 alloy bar
Incoloy alloy 925 is a precipitation-hardenable nickel-iron-chromium alloy that contains additions of molybdenum, copper, titanium, and aluminum. The alloy has excellent mechanical properties at both ambient and elevated temperatures, making it suitable for use in a wide range of applications, including sour gas and oil production, aerospace, chemical processing, and marine engineering.
Incoloy alloy 925 is known for its high strength, which is achieved through a combination of solid solution strengthening and precipitation hardening. It also exhibits excellent resistance to corrosion and oxidation in a variety of environments, including those containing sulfides and chlorides.
The addition of molybdenum and copper to the alloy improves its resistance to pitting and crevice corrosion, while the titanium and aluminum additions enhance its resistance to intergranular attack. The combination of these elements makes Incoloy alloy 925 highly resistant to stress corrosion cracking and hydrogen embrittlement.
The alloy is typically supplied in the solution annealed condition, and can be easily fabricated using common techniques such as welding, brazing, and machining. After fabrication, the alloy can be precipitation hardened to achieve its maximum strength.
Incoloy alloy 925 is available in a range of forms, including round bars, flat bars, forgings, and wire. It is also available in various sizes and dimensions to meet the specific needs of different applications.
Overall, Incoloy alloy 925 is a versatile and high-performance alloy that offers excellent strength, corrosion resistance, and durability in demanding applications.
The international standard designations for Incoloy alloy 925 include UNS N09925 and W.Nr. 2.4858. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan.
Here are the specific standards and designations for Incoloy alloy 925 in different countries:
United States: AMS 5660, AMS 5661, AMS 5662, AMS 5663, AMS 5664, AMS 5672, AMS 5872, ASTM B408, ASTM B805, UNS N09925
Germany: DIN 17742, DIN 17753, DIN 17754, W.Nr. 2.4858
United Kingdom: BS 3076, BS HR 6
Europe: EN 10095, EN 10204-3.1
Japan: JIS G4902, JPI-SB46
We can provide the following the form:Incoloy alloy925 coil; Incoloy alloy925 strip;Incoloy alloy925 plate; Incoloy alloy925 sheets; Incoloy alloy925 tube; Incoloy alloy925 pipe;Incoloy alloy925 flat; Incoloy alloy925 bar
Incoloy alloy 925 has a wide range of applications in various industries, including:
Oil and Gas Industry: Incoloy alloy 925 is widely used in oil and gas industry due to its high strength, excellent corrosion resistance, and resistance to sulfide stress cracking in sour environments. It is used in various components of downhole tools, such as subsurface safety valves, tubing hangers, and packers.
Incoloy Alloy 890 is a high-performance corrosion-resistant alloy that belongs to the chromium-nickel-molybdenum series of alloys. It is mainly composed of nickel, chromium, molybdenum, iron, and copper. This alloy has excellent corrosion resistance in various corrosive environments such as acids, alkalis, and salt solutions.
Incoloy Alloy 890 offers high mechanical strength and toughness, good weldability, and ease of fabrication. It is resistant to stress corrosion cracking, pitting, and crevice corrosion, making it suitable for use in harsh and demanding applications in industries such as chemical processing, oil and gas, and marine engineering.
The chemical composition of Incoloy Alloy 890 typically includes 26-30% nickel, 19-23% chromium, 4-5% molybdenum, 1.5-3% copper, 0.3% maximum carbon, 2.0% maximum manganese, and 0.5% maximum silicon. It may also contain small amounts of other elements such as nitrogen, phosphorus, and sulfur.
In terms of mechanical properties, Incoloy Alloy 890 has a tensile strength of 620 MPa and a yield strength of 300 MPa at room temperature. Its elongation at break is 50% minimum. The alloy also has good impact strength and fatigue resistance at both room temperature and elevated temperatures.
Incoloy Alloy 890 can be heat-treated to enhance its mechanical properties. Annealing at 1093-1204�°C for 30 minutes per 25mm of thickness followed by rapid air cooling can improve the alloy's toughness and ductility. Solution annealing at 1093-1177�°C followed by rapid water quenching can improve its corrosion resistance and high-temperature strength.
Overall, Incoloy Alloy 890 is a versatile and high-performance alloy that can withstand corrosive environments and harsh operating conditions. Its excellent properties make it suitable for use in various industrial applications where high strength and corrosion resistance are required.
The following are the execution standards of Incoloy alloy 890 in various countries:
US: AMS 5837, AMS 5598, AMS 5666, AMS 5839, ASTM B366, ASTM B408, ASTM B425, ASTM B564, ASTM B751, ASTM B775, ASTM B829, UNS N08890
Europe: EN 10095
Germany: DIN 17742, DIN 17750, DIN 17754
UK: BS 3076
Japan: JIS G4902
China: GB/T 14992
We can provide the following the form:Incoloy alloy890 coil; Incoloy alloy890 strip;Incoloy alloy890 plate; Incoloy alloy890 sheets; Incoloy alloy890 tube; Incoloy alloy890 pipe;Incoloy alloy890 flat; Incoloy alloy890 bar
GB:GH89/JIS:G4303/UNS:N008904/W.Nr:1.4539
Manufacture of chemical equipment such as heat exchangers, reactors, and evaporators.
Applications in the petroleum extraction and refining industry, such as drill bits, casings, pumps, and valves.
High-temperature components in the aerospace industry, such as turbine disks, turbine blades, and combustion chamber components in jet engines.
Reactors and equipment in the pharmaceutical industry, as well as other equipment and components in high-temperature and corrosive environments.
Incoloy alloy 825 is a nickel-iron-chromium alloy with molybdenum, copper, and titanium added to enhance its corrosion resistance in highly oxidizing and reducing environments. It has excellent resistance to both reducing and oxidizing acids, stress-corrosion cracking, and pitting and crevice corrosion. It is also highly resistant to corrosion caused by chloride ions and sulfide stress cracking. The alloy has good mechanical properties and can be easily fabricated and welded. Incoloy alloy 825 is often used in chemical processing, pollution control equipment, oil and gas recovery, acid production, and nuclear fuel reprocessing industries. It is available in various forms such as pipes, tubes, plates, sheets, bars, wire, and forgings. The alloy can be further customized based on customer requirements for specific applications.
Trade names:
UNS N08825
W.Nr. 2.4858
Standards:
United States: ASTM B423, ASTM B424, ASTM B425, ASTM B564, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829, ASME SB423, ASME SB424, ASME SB425, ASME SB564, ASME SB704, ASME SB705, ASME SB751, ASME SB775, ASME SB829
Europe: EN 10028-7, EN 10088-2, EN 10216-5, EN 10217-7, EN 10272, EN 10296-2, EN 10297-2, EN 10298-2, EN 10222-2, EN 10263-4, EN 10272, EN 10302, EN 10312, EN 10357, EN 1092-1, EN 1092-2, EN 1092-3, EN 1092-4, EN 1092-5, EN 1759-1, EN 1759-2, EN 1759-3, EN 10204, PED 2014/68/EU
Germany: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17753, DIN 17754, DIN 17756, DIN 17758, DIN 17858
France: NF A 49-311, NF A 49-321, NF A 49-322, NF A 49-324, NF A 49-325
United Kingdom: BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA16, ASTM B423, ASTM B424, ASTM B425, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829
Japan: JIS G3101, JIS G3103, JIS G3120, JIS G3141, JIS G3161, JIS G3163, JIS G3192, JIS G3193, JIS G3201, JIS G3214, JIS G3221, JIS G3311, JIS G3445, JIS G4051, JIS G4303, JIS G4304, JIS G4305, JIS G4308, JIS G4309, JIS G4318, JIS G4320, JIS G4321, JIS G4801, JIS G4805, JIS G4808, JIS G5101, JIS G5121, JIS G5151, JIS G5152, JIS G5501, JIS G5502, JIS G5510, JIS G5511, JIS G5512, JIS G5521, JIS G5523, JIS G5525, JIS G5528, JIS G5702, JIS G8031
We can provide the following the form:Incoloy alloy825 coil; Incoloy alloy 825 strip;Incoloy alloy 825 plate; Incoloy alloy 825 sheets; Incoloy alloy 825 tube; Incoloy alloy 825 pipe;Incoloy alloy 825 flat; Incoloy alloy 825 bar
BS:3072/NF:A 49-311/UNS:N08825/W.Nr:2.4858
Refining and Chemical Processes
Distiller
chemical reactor
Hydrogen Chloride Hydrogenation Reactor
Marine Engineering
Nuclear Fuel Reprocessing Equipment
Quality Mold Starts from Excellent custom mold design
At YWX mold design manufacturers , our experienced designers play a crucial role in ensuring the quality of our tools. With years of expertise, the YWX mold design company collaborates closely with customers to develop well-designed molds that are easy to maintain and cost-effective to produce.
Our skilled in-house design team, with over 15 years of experience, offers a comprehensive design package. Our mould design services include feasibility studies, design recommendations, filling simulation, Moldflow analysis, and 2D & 3D tool design using CAD, Unigraphics, and other software.
If needed, our injection mold design services designers can be involved in the early stages of a project to support part development and enable a tool-specific design, saving you time and costs.
Choose the YWX mold design manufacturer for excellent custom injection tooling design services and engineering expertise.
1. Use imported 0.9 mm thickness-PVC Material, which is waterproof, prevent wear, radiation protections. Korea PVC material extremely good abrasion resistance.
2. Adopt imported valves, convenient and safe and reliable.
3. All adhesive parts imported glue, peel strength and high-temperature resistance, hydrolysis, anti-ultraviolet radiation properties are much better than domestic glue.
Long :295cm~550cm ,
Net weight:55~180kgs
Gross weight:60kgs~188kgs
Has got CCS and CE passport
309 Marine Engines Suppliers
Short on time? Let Marine Engines sellers contact you.
