Auto heating, auto molding forming, auto stacking, auto collecting the leftover material all in one.
Sectional heating of electric fumace, the forming speed is time faster than ordinary blister forming machine.
Commom forming dies, common cutting molds make the machine cost cut down several times compare to other brand all-in-one automatic forming machine.
Suitable for all of blister forming.
1. The industrial chiller is divided into two categories: Water-cooled chiller and air-cooled chiller. Water-cooles chiller cooled by water, using with cooling tower and water pump, the other cooled by fan, can be used independently.
2. Our compressor is imported from Italy, France and so on, being of high-quality built-in safe protection, with low noise, the electricity of province is durable.
3. Cooling capacity range: 9.8kw~189kw
4. Normal conditions: Chilled water inlet temperature is 20 degrees, outlet temperature is 15 degrees. Cooling water inlet temperature is 30 degrees, outlet temperature is 35 degrees. But the temperature can be set in 5-30 degress range according to customers' request, and the lowest temperature can arrive -25 degress.
5. Stardard Input power: 3P-380V-50Hz, Allowable fluctuate voltage: &
6. The quantity of compressor can be one or two, each compressor is independent refrigeration system. Each other run independently. When the one is working, the other can be working or not.
Kilolaser factory isone of thefirst factory tofocus on doresearch and produce the laser coconut cutting processing more than 3years.
This machine is designed for coconutprocessing.Able tocut the coconut shell.And to make a hole for the users to take out the coconut juice .Also , can engrave any designs on the coconut shell for make all kinds ofbeautifulcrafts.This machine with high efficiency.Increase production capacity, reduce labor costs.Widelyused in the to make coconut powder, coconut sauce, coconut meatcoconut oil, coconut drink, coconut crafts etc.Which is got high praise from the customer.And said it is the good helper for coconut industry.
Advantages
Adopt the imported USA lead shine stepping motor, Korea guide railway, with high precision synchronization system
Selecting the best of domestic laser tube,higher precision,make the processing more concise and easy.
Optical path system adopt Singapore imported laser wavelength system,ZnSe Focus lens ,molybdenum mirror, small spot,fine cutting edge.greatly reduced the laser power�??s attenuation during the transmission process.
Friendly design, real-time unable laser energy, greatly facilitate the operation of the customer Good quality parts,very lower maintenance rate Software support multiple
For mates:AI,PLT,BMP,JPG,DXF,DST,seamless compatibility CoreIDRAW,CAD,PHOTOSHOP, etc
Use two online maximum upgrade mode control technology,which guarantee the synchronization of new control technology and ensured the user �??s income of the investment.
Adopt LAN interface,USB, two- way communication,enhanced the speed and accurate of the transfer; Can support one computer control up to 254 sets of laser equipment,greatly reduced the user's investment cost .
with automatic work energy compensate function, work effect gets gr zeat improvement.
Technical Parameter
Model KL-640-SC KL-960-TC KL-1090-16C
Working Platform 60x40cm 1 coconut Hole, 90x60cm 2 Coconut Hole ,1mx90cm 16 coconut hole
Laser power 80w
Laser type co2 sealed glass tube
Controlling system Kilolaser Original Laser Software
Table Type KL Coconut Special Working Table
Water chiller CW3000 High force
Max Engraving speed 500mm/s
Repeated Positioning Accuracy ±0.5mm
Min.Cutting English Letter 2mm
Character 0-25mm(it�??s up tothe material)
Max.Cutting Depth
Cooling type Water Cooling
Working Temperature 0-35°C
Work Humidity 5-95%
Working Power 220V/50Hz/60Hz/2kVA, 110V/50Hz/60Hz/2kVA
Machine Size 2060x1650x1350mm
Packing Dimension 2650x1700x1500m
Netweight 680Kgs
Gross Weight 750Kgs
2793 Sugar Processing Plants Suppliers
Short on time? Let Sugar Processing Plants sellers contact you.
our advantages
ESTOPCNC is committed to providing the best machining equipment for the industry at the most ideal price, in order to improve the CNC application of the overall industry ability.
Application area
Mechanical product series is not only used in steel milling processing, mould, mold base, tools, mold parts, tool parts in the field of traditional coarse fine machining, also widely used in manifold block, hydraulic valve body, breaker hammer, auto parts, medical equipment, sports equipment, photovoltaic products, hardware and electrical appliances, aerospace, semiconductor, new energy and other industries.
Enterprise core
Industry qualification, brand strength guarantee; introduction of German and Japanese advanced technology and accessories, effectively guarantee product quality; long-term service of famous brand customers, with good industry reputation; pre-sale, sale, sale and after-sales, quick response to customer needs.
Enterprise positioning
Mold steel, mold base six sides milling processing whole production line equipment: steel plate circular saw, aluminum plate circular saw, high-end CNC lathe, CNC double sides milling center, duplex milling machine, double column grinding machine, gantry milling machine, gantry machining center, horizontal machining center, rough milling machine, deep hole drill machine, chamfer machine, flipping machine and other equipment professional manufacturers, exporters.
Technically training
On-site installation and commissioning and sample testing, one-to-one, hand-to-hand teaching, remote VR technical support, etc.
We are a professional manufacturer of milling machine for mold processing here in China, our product have been exported to many country markets. For more details, please take a visit to our website. Our price includes the top level of quality control and the decent after service.
Dongguan xiongying precision mold co., ltd is very professional in research, development, manufacturing and service of precision mold components. After several years' strugglement, xiongying has become an oem factory of many craft brothers all over the world. Xiongying has the ability to manufacture all kinds of precision non-standard components; these components are commonly used in precision punch mold, plastic mold, auto mold, medicine mold, computer linker mold and other factory automation components. Our products are mainly sold to china, europe, america, east asia and southeast asia. We are able to make and check customised products according to world-brand standard as well as gb, jis, din and aisi international industrial standard. Products' precision: size tolerace within .001mm, axiality within 0.002mm, roundness within 0.0015mm, surface roughness within ra0.025, straightness within 0.002.
We are a professional manufacturer of Machine Tools here in China, our product have been exported to many country markets.
Our Main Products: High precision machining centers, Surface Grinding machine, Gantry grinding machine, NC band saw machine, CNC Circular plate sawing, CNC Vertical milling machine, CNC Duplex milling machine, Deep hole drilling machine, Horizontal milling centers, Vertical machining centers, High speed CNC turning centers, High Precision 5-Axis Vertical Machining Center
Product parameters:
Control axis number: 4
Cutting capacity: 2*3 mm
Cutting width: 400-1600mm
Worktable Dimensions: 1100*1100mm
Max loading weight: 9000kg
Spindle speed(Infinitely variable speeds): 20-200 rpm
Spindle power: 2*30KW
Spindle taper: NT60
Cutting diameter: 450/500mm
X/Y/Z axis motor power: 3.0/3.0/4.0 kw
X/Y/Z Max feed speed: 8000/8000/8000 m/min
X/Y/Z Max cutting speed: 6000/6000/6000 rpm
Accuracy Squareness: 0.02 mm/300mm
Accuracy for dimension:0.02 mm/300mm
Hydraulic oil tank: 100L
Lubrication oil tank: 3L
Power: AC380V 90KVA
Machine net weight: 31000 KG
We can customize models according to customer requirements.
Features
Easy installation, can butt pelletize directly.
With double layer stainless steel stamping network to eliminate chip and strip.
Apply fast button fixed pipeline to be easy and quick installation.
Introduce the famous bobbing machine and fan to be low noise and strong wind.
All stainless steel manufacture reversible type storage vat, sturdy and durable and easy cleaning.
Vibration screening multifunction consists of vibrating screen?storage vat and feed delivery pipe.This sophisticated and practical design subtly connect vibrating screen?draught fan and storage vat together as a whole to realize the economic space occupation?high efficient and easy to operate and control to material listing and material storage.
Features
1: high quality with excellent performance
2: versatility with easy handling
3: sleek design for long lasting life
4: bench mark designing for low end range
5: sturdy and simple for consistent operation
6: high end model with production capacity 250kg/hr ~ 430kg/hr
Standard specifications
1 type co-rotated twin screw extruder
2 capacity 250kg/hr(abs pellet) (55kw main motor)(standard)
4.30kg/hr(abs pellet)(90kw main motor)(option)
3 dimension 800mm(ch), 3, 400mm(l), 1, 800mm(w), 1, 600mm(h),
4 weight 2.8 ton
5 voltage and capacity of power supply
Voltage 380 ~ 440v, 50 ~ 60hz, 3 phase(standard)
Capacity 88kva(ac 55kw main motor)(standard)
123kva(ac 90kw main motor)(option)
6 barrel nitrided steel, nitrided (standard)
Hardness over hrc 63
L/d 40
7 screw segment type with involute spline shaft
8 heater brass casted heater nine blocks 59kw
9 temperature control 9 zone +2zone
10 rpm 50 ~ 440 rpm(main motor 55kw) (standard)
50 ~ 700 rpm(main motor 90kw) (option)
11 main motor 55kw of nema motor by siemens.(standard)
90kw (option)
380 - 440v(standard)
The equipment is widely used in many fields, such as the special production materials of the compounding technology, master batch, engineering modified materials, automotive materials, wire and cable, large plastic pipe, panels, petrochemical, chemical fiber architecture, medicine, agriculture, defense, etc.
1. Suitable for granule flake plastic material dewatering;
2. Suitable to drying equipment of water ring cutting, in water pelletizing and plastic recycling in extrusion process;
3. Speedy dewatering efficiency and high capacity, detachable built in dewatering screen for convenient cleaning;
4. Screen, using high quality stainless steel material, rotor and body, quipment is durable;
5. Production of advanced technology, the spindle through dynamic and static balance, rational design, low noise, easy to clean. You can easily open the body, remove dryer internal sieve impurities;
6. Good dewatering effect, less power consumption, high efficiency, continuous production, high degree of automation;
7. In addition to dehydration, it can wash the plastic micro small debris such as sand.
Application:
The vertical plastic centrifugal dewatering machine is currently the most economical a rapid drying equipment. This machine mainly used in plastic process, chemical industry. It is used to dewatering processed material. Its operation is very simple. It can be used separately or used in production line. It's important for granulation lines.
Main features
Scientific and reasonable structure;
Running with low noise;
No need of auxiliary electric heating equipment;
High pelletizing rate;
High intensity and slippery skin;
Diameters of pellets hole is both ø5 and ø6 available, while customization can be realized;
Easy operation and maintenance;
Long usage life with steel material equipped machinery.
Longshi commits to provide customers with excellent service and best products. This new type plastic pelletizing machine will definitely have a reform to traditional technology and create a new era of plastic pelletizing.
Use of the plastic pellets
Except food industry, this renewable plastic pellets can be widely used in any other field, like clothing, construction, agriculture, chemical, machinery industry and so on. Beyond that, they can also apply to electrical equipment industry and electronic communications industry.
Features:
1, stainless steel material tank and propeller eliminates rust corrosion and easy to clean, prevent your material from contamination of foreign substances;
2, the frame is of framework design, solid and durable;
3, propeller is wholly processed after welding, with high concentric force and stable function;
4, the vertical shape allows narrow space of plant, save room.;
5, mixing in a closed tank, allows uniform mixing/blending effect and no leakage definitely;
Main application:
This is a horizontal ribbon type paddle mixing machine is a pioneer product researched and a new high-efficiency mixer. It is widely used in the solid-solid (powder material) and solid-liquid (powder material & fluidity material) mixing in the field of chemical industry, pharmacy, foodstuff industry, etc.
Dongguan Xiongying precision Mold Co., Ltd is very professional in research, development, manufacturing and service of precision mold components. After several years' strugglement, Xiongying has become an OEM factory of many craft brothers all over the world. Xiongying has the ability to manufacture all kinds of precision non-standard components; these components are commonly used in precision punch mold, plastic mold, auto mold, medicine mold, computer linker mold and other factory automation components. Our products are mainly sold to China, Europe, America, East Asia and Southeast Asia. We are able to make and check customised products according to world-brand standard as well as GB, JIS, DIN and AISI international industrial standard. Products' precision: size tolerace within .001mm, axiality within 0.002mm, roundness within 0.0015mm, surface roughness within Ra0.025, straightness within 0.002.
XH-401 two roll mill is mainly used to uniformly mix the raw material and additinal agents for testing and apply the experiment resoults and its ratio in the production line to satisfy the requirement of quality and color specified by the customer.
• Built-in heater,together with LCD temperature controller and high-precision sensor,can automatically compensate the temperature to guarantee the temperature equalization.
• Telfon stop block.
• Taiwang gear motor,together with high-precision gearing chain,guarantees stable operation,low noise and good durability.
• Emergent reverse guarantees the safety.
• Alternative configuration:oil heating and cooling system,AC frequency control system,independent limitless speed change,automatic roller-gap adjustment ande man-machine interface.
• Relyng on the principle of customer-based, the company can customize the product according to the customer's requirements.
Xh-406 press machine is applicable to r & d in laboraty.Put the raw materials into the mold between the electric boards and set up certain pressure and temperature.The raw materials are formed into test specimen for test use.This machine features compact size, cmplete functions, stable temperature, low noise, easy opention and material saving.
• High-performance oil hydraulic system with automatic pressure compensation function can preset the time and pressure between two pressurizations and automatically conduct pressurization and depressurization supplemented with high-precision cylinder.
•high-precision and abration-resistance guide pillar features strong loading force and stable lifting.
•imported kdb electric board features high-temperature resistance, abrasion resistance, fast thermal transmision and strength against deformation.
•high-precison temperature sensor, together with led temperature controller, built-in dense-point heating wire and tubular condenser, has the temperature range from normal temperature to 300°c.
•single heating can be designed according to the requirements.
•oil hydraulic system:the pressure range:20 ton, the maximum stroke of the cylinder:140mm.
Technical parameter
Capacity: 10-50 ton or designated
Area of electric board: 300mm x 300mm or designated
Area of colling plate: 300mm x 300mmor designated
Plate spacing: 0-90mm or designated
Timepiece: led 0-99(min)
Temperature controll: normal temperature-300°c
Temperature precision: ±4.5°c
Colling mode: compressor water colling or running water colling
Outside dimention: 1000 x 600 x 1500mm(w x d x h):
Description
> Patented transparent thermal protection screen that complies with the IEC A-13 safety standard.
> Patented innovative auto water spray to add moisture and have juicier food.
> Preset 40�°C (104�ºF) temperature setting for making your own yoghurt.
> Intuitive digital control panel with LED display.
> 3 preset cooking temperatures.
> A complete all-in-one, versatile cooking unit to roast, grill, bake, barbeque, steam, broil, dehydrate, defrost, and air-fry.
> Transparent tempered glass lid for food safety.
> Cooking temperature ranges from 40�ºC to 260�ºC (104�ºF - 500�ºF).
> Increase cooking capacity with extendable hinge arm and extender ring.
> Turns off automatically once lid is lifted.
> Container loading:
1x20ft Container: 336 pcs
1x40ft Container: 694 pcs
1x40HQ Container: 806 pcs
Description
> Large touch control panel with LCD display.
> Patented innovative auto water spray to add moisture and have juicier food.
> Cooking temperature ranges from 40�ºC to 260�ºC (104�ºF - 500�ºF).
> 3 preset cooking temperatures.
> A complete all-in-one, versatile cooking unit to roast, grill, bake, barbeque, steam, broil, dehydrate, defrost, and air-fry.
> Transparent tempered glass lid for food safety.
> Increase cooking capacity with extendable hinge arm and extender ring.
> Turns off automatically once lid is lifted.
> Container loading:
1x20ft Container: 336 pcs
1x40ft Container: 694 pcs
1x40HQ Container: 806 pcs
2793 Sugar Processing Plants Suppliers
Short on time? Let Sugar Processing Plants sellers contact you.
