Find Verified Sawdust Briquette Charcoal Suppliers, Manufacturers and Wholesalers

There are briquetting moulds for making biomass sticks and pelleting moulds for making small pellets:
Features of mechanical stamping briquette machine:
Processing various biomass materials
Convenient for transportation and storage
Long service life, good strength, toughness and wearability
High production efficiency, low power consumption (produce per ton of biomass briquettes consume 40 kwh).

Capacity: 4000kg/hour (for coal powder) 2000kg/hour (for charcoal powder)

Roller width: 250 mm

Roller diameter: 360 mm

Motor power: 11 kw

Pressure of machine: 20-30t

Pressure on rollers line: 0.5 r/min

Endurable pressure of briquettes: 60kg

Rotation of main shaft: 18 rev/min

Roller material: 65 mn alloy steel

Machine size¡¨ºo2260*1531*1980 mm

Machine weight: 1750 kg

Finished products (sizes): 30mm*60mm (common sizes)

Plywood box

This machine used to compress metal scrap into solid blocks for the purpose of transfer and remelt.

ModelSs-03eSs-04e
H.S. Code84748010008474801000
Output7kw15kw
Electric motorCustomization380v, 3phase, 50hz
Capacity
Wood pellet: 80-120kg/h

Animal feed: 200-300kg/h

500kg/h
Finished diameter2mm, 4mm, 6mm, 8mm2mm, 4mm, 6mm, 8mm, 10mm
Finished density0.8-1.4g/cm30.8-1.4g/cm3
Required moisture5%-20%5%-20%
Required length2-5mm2-5mm
Dimension140*65*110cm140*65*110cm
Gross weight215kg265kg
PackagePlywood boxPlywood box
Lead time15 days15 days


Plywood box

With the increasingly fierce competition in the metallurgical industry market, in order to adapt to the ferroalloy market, our company has developed a new type of deoxidizing material - new alloy silicon to meet the needs of users to reduce costs and improve economic efficiency. This product mainly uses silicon powder as the main raw material and is pressed on the briquette. It is a special product that can replace ferrosilicon in steel production. It can reduce production costs and promote recycling of resources. The production process of the product is as follows:Step 1: Raw material: metal silicon cutting powder, fine grade.Step 2: Inspect the raw materials, and the raw materials must pass the test.Step 3: Process the raw material into a fine powder.Step 4: Add the liquid to the stirrer together with the above powderStep 5: Press the product into a spherical shape with a size of 10-50 mm.Step 6: Test the product and the product must pass the test.Step 7: Pack the product and wait for transportation.The product model categories are as follows:

pto drive pellet mill Feature:

High efficiency centrifugal,high pressure,

Low wear rate, pressure roller die long service life.

Press roller adopting automatic lubrication system,continuous operating without stop

Die using vertical structure, direct way-in material,

High Automation: 1-2 workers are enough to operate all the process

1. Raw materials: ferrosilicon scrap, ferrosilicon powder and binder

2, the production process Sampling and testing raw material ferrosilicon scrap, ferrosilicon powder, in line with the production indicators, the ferrosilicon powder and binder into the mixer and stir evenly, through the conveyor belt into the ball press into a 10-50mm sphere, Output through the conveyor. Sampling and testing the finished silicon iron ball, sent to the second-three test room for testing, the test results meet the customer's requirements and then bagged and ready for shipment.

3. Product index Si: >65%; C: 2.0%; P: 0.05%; S: 0.03%; Al: 3.0%; Fe: 15-20% Size: 10-50mm 90%min, Package : 1 Mt Big Bag

4. Characteristics: The same effect of ferrosilicon and ferrosilicon is the indispensable deoxidizer and alloying agent in the steelmaking process. It can improve the furnace temperature, increase the fluidity of molten iron, effectively discharge slag, and improve pig iron and castings. Toughness and cutting ability. First, the uniform granularity reduces the loss, labor, electricity and transportation of the natural block of ferrosilicon used in steelmaking. Second, the product has uniform particle size, accurate feeding, good deoxidation effect, shortening deoxidation time, saving energy, improving steelmaking efficiency, improving quality, low raw and auxiliary materials consumption, high recovery rate and reducing labor intensity. Third, the melting speed is fast, the division is even, and the power consumption is reduced.

5. Usage: The method of use is exactly the same as that of ferrosilicon.

Metal scrap hydraulic briquette press
Y83-160A
Y83-230
Y83-300
YA83-300

Wooden case

Charcoal briquetting machine can produce charcoal stick with such material as bits of wood, rice shell or peanuts shell, etc. The raw material(12% water content is formed into charcoal stick under high pressure at high temperature.
This machine adopts temperature adjusting indicator, it can work steadily at the fixed temperature and has the feature of rational structure, easy to operate and maintain. The solid charcoal stick produced by this machine has the feature of being easy to light, and having high calorific value (over 20% higher than wood), little pollution when burning and high density which is favorable for ransportation. This machine can make full use of the agro forestry waste and convert it into valuable green fuel.

Technical information:
Capacity: 300 kg/h
Power: 22 kw
Size: 1860f-700f-1220 mm
Weight: 1500kg

Capacity: 300 kg/h
Power: 22 kw
Size: 1860f-700f-1220 mm
Weight: 1500kg

Powder:
F.C: 80% Ash:10%-12% V.M.:5%-7% S:0.5% H2O:1.0% Size:0-3mm
Pulverized Coal(PCI) Powder is a new spray metallurgy technology for recarburizer, mainly used in electric arc furnaces. This method can strengthen smelting, shorten metallurgical reaction time, change the traditional electric arc furnace steelmaking process, and improve the operating strength.
The Function of PCI powder:
1. It has the characteristics of high carbon content, low sulfur and phosphorus, stable chemical composition, moderate hardness and regular particle size.
2. Improve thermal efficiency, reduce power consumption, reduce electrode consumption, and extend the life of the lining
3. Improve productivity and economic efficiency and reduce dust pollution in the workshop and labor intensity of workers.

Briquette:
F.C: 80% S:0.1-0.3% H2O:2.0% Max Size:25 mm*35mm*45mm
F.C: 75% S:0.1-0.3% H2O:2.0% Max Size:25 mm*35mm*45mm
F.C: 70% S:0.1-0.3% H2O:2.0% Max Size:25 mm*35mm*45mm
Graphite Carbon Ball, is made of shattered graphite ore, by dosing, grinding, extrusion, drying and a series industrial process, then being a globular structure which has a certain intensity.

It is an environmentally friendly smelting carbon-increasing product and a high-quality material for carbonation in the metallurgical industry.
The Advantage of graphite briquette:
1 soft material, low sulfur, low phosphorus, no odor.
2, Graphite Carbon Ball is hemispherical, and can also be suitable according to user requirements.
3, high absorption rate, lubrication and fluidity is very good, suitable for thinner casting steel water to increase carbon, easy to melt (furnace temperature up to 1350 degrees or more), the general absorption rate is about 70%.
4, easy to use, can be invested, and not flying, in line with the requirements of the environmental protection department.

Four rollers double pressing briquetts maker can supply high pressure and high intensity during production of briquetts, itf+s mainly used in the briquetts making of various color and black metallic mine powder . It can be used to make briquetts from charcoal powder and coke powder with binder.

Capacity: 4000kg/hour (for coal powder)
2000kg/hour (for charcoal powder)
Power: 7.5-11 kw
Width of roller: 250mm
Diameter of roller:360mm
Pressure of machine: 20-30t
Endurable pressure of briquetts: 60kg
Rotation of main shaft: 18 rev/min
Material of roller: 65 mn
Weight of machine:1850kg