This equipment is mainly used for the unloading and loading of bulk cargoes. The bulk cargo is grabbed by a portal grab crane, and the grabbing materials are run to the loading and unloading by the relevant operation mechanism of the gate grab crane. Above the system, the grab is opened by the PLC control system of the portal crane and the bulk cargo is unloaded into the unloading funnel of the loading and unloading system; an electrohydraulic push rod control device is located on the discharge opening of the unloading funnel. It is used to control the flow of material, so that it is safe and effective when loading the vehicle, which greatly improves work efficiency.
�?� The hopper of this equipment is divided into two layers, because the lower hopper of the upper hopper is relatively large, the hopper is not easy to raise dust, the suction port of the dust collector is arranged in the middle of the two layers, and the upper and lower material ports are sealed and dusted with a pulse bag filter.
�?� ï¿½?� ï¿½?� The funnel designed by our company is mainly used for loading and unloading coal slag, cement powder and iron powder, and can be designed according to the requirements of customers. The dedusting device, electro-hydraulic door device and vibration feeding device can be installed on the funnel, which greatly improves the Handling efficiency. This equipment includes bagging machine, main support steel frame, gravity feed funnel, power distribution box, discharge chute, bag holder, pneumatic system and some optional devices such as dust collector, empty Presses, etc. Among them, the DCS bagging machine consists of feeders, weights, etc. This device is used for weighing and bagging various small particle materials such as grain, dried cassava, fertilizer, PVC powder, small pellet feed, etc. Small particles of ore, bauxite and so on.
The diesel engine drives hydraulic grabs, including rings, shackles, housings, underbearing beams, bucket bodies, hydraulic devices, and radio remote control devices. The hydraulic devices are equipped with hydraulic pumps, oil cylinders, and control valve block systems. The hydraulic pumps are connected to the diesel engine connected thereto. The power is provided and the cylinder is driven through the solenoid valve. Both ends of the connecting rod are respectively connected to the inner edges of the two buckets through the pin shaft to limit and protect the grab when it is opened and closed. The grab can be remotely operated. Grab grabs with remote control or without any power supply, drive the cylinder to open and close the grab, pick and place the cargo, adapt to the harsh working environment, work under high frequency conditions, and extend the grab The working life of the company increases the efficiency of the company and overcomes production safety hazards, and is easy to operate.
Large dredging grab is an effective tool for dredging silt, hard mud, iron plate sand, blasting reef and even sunken ship. This kind of grab is efficient, durable, easy to maintain, easy to operate, and working well under harsh conditions.
The pulleys in the grab with many seal, which ensures that the grab will not permeate the water and sediment in seawater. After years of research, our company has developed a series of products from 6t to 200t. This type of grab is suitable for single ,two and four rope crane.
The PACON 4800 Online Hardness Analyzer uses the principle of titrimetric colorimetry and is the best choice for water softening systems and reverse osmosis protection for enrey-level measurement..
Measurement Parameters
Total Hardness
Applications
Demineralized water
Reverse osmosis
Boiler water
Laundry room
Groundwater
Cooling tower
Pharmaceutical water
Process water
Drinks / food
Fully automatic measurement
According to the selected reagent, automatically measure the total water hardness in different ranges. This analysis is more efficient than manual measurements and more reliable than other indirect measurement methods such as ion-selective electrodes.
Smart & accurate & stable
GB measurement method - Titration colorimetry method, the instrument has a calibration function. Integrated measurement techniques and two-stage analysis identify external influences such as trough contamination, watery turbidity and external light and eliminate these effects in the measurement.
dimension is only 300x300x200mm, can be directly linked to the wall or mounted on the bracket.
Minimum maintenance workload
Complete isolation of water and testing device, detachable measuring cell, without the need for additional tools for maintenance, can be easily implemented. It is recommended to replace the spare
parts package once a year (including: peristaltic pump head reagent tube, stirrer, seal, order number: 50-5000-10)
Automatic cleaning
Rinsing and Cleaning are performed automatically for each analysis, ensuring measurement accuracy, repeatability and reduced field maintenance.
Low reagent consumption
Reagent bottle can be easily replaced, 500ml reagent can measure 5000 ~ 10000 times. Reagents valid for 2 years.
SD card data storage
2G data storage card, can be directly imported into the computer to excel format access to historical data and system failure information.
The PACON 4800 Online Hardness Analyzer uses the principle of titrimetric colorimetry and is the best choice for water softening systems and reverse osmosis protection for enrey-level measurement..
Measurement Parameters
Total Hardness
Applications
Demineralized water
Reverse osmosis
Boiler water
Laundry room
Groundwater
Cooling tower
Pharmaceutical water
Process water
Drinks / food
Fully automatic measurement
According to the selected reagent, automatically measure the total water hardness in different ranges. This analysis is more efficient than manual measurements and more reliable than other indirect measurement methods such as ion-selective electrodes.
Smart & accurate & stable
GB measurement method - Titration calorimetry method, the instrument has a calibration function. Integrated measurement techniques and two-stage analysis identify external influences such as trough contamination, watery turbidity and external light and eliminate these effects in the measurement.
A variety of measurement modes
- Continuous measurement
- Interval measurement (5-99min)
- External switch signal initiates a measurement
Compact design
The dimension is only 300x300x200mm, can be directly linked to the wall or mounted on the bracket.
Minimum maintenance workload
Complete isolation of water and testing device, detachable measuring cell, without the need for additional tools for maintenance, can be easily implemented. It is recommended to replace the spare
parts package once a year (including: peristaltic pump head reagent tube, stirrer, seal, order number: 50-5000-10)
Automatic cleaning
Rinsing and Cleaning are performed automatically for each analysis, ensuring measurement accuracy, repeatability and reduced field maintenance.
Low reagent consumption
Reagent bottle can be easily replaced, 500ml reagent can measure 5000 ~ 10000 times. Reagents valid for 2 years.
SD card data storage
2G data storage card, can be directly imported into the computer to excel format access to historical data and system failure information.
innoCon6800O controller matching with innoSens 420 polarographic dissolved oxygen sensor, can continuously monitor the dissolved oxygen in water, with NTC automatic temperature compensation, panel installation, suitable for using under a variety of weather and complex industrial environments.
Application:
Wastewater Treatment
Surface Water
Aquaculture
innoCon 6800C controller is specially designed for water treatment and industrial process control. Used with innoSens 310/330 sensor, it can measure the conductivity,resistivity,TDS and temperature of the sample water. It features automatic temperature compensation and has various mounting methods. 4-20mA/RS485 and multiple control function outputs are a standard feature.
innoCon 6800CL Controller is specially designed for water treatment and industrial process control. Used with innoSens 710 sensor and PA-711 flow cell, it can measure the concentration of residual chlorine, chlorine dioxide and ozone in the water. Its adoption of membrane free constant voltage sensor eliminates the need for membrane and reagent replacement. Furthermore, it is highly sensitive and stable, only requiring simple maintenance.
The streaming current is used to continuously measure the electric charge on the tiny suspended particles and colloids in the liquid. The electric charge is measured by electronic signal processing.
The measurement result is converted into A.C signal or flowing current (SC). The value of flowing current (SC) is proportional to the charge density. The charged state depends on the water after flocculation.
Hangzhou Hopoo Light&Color Technology Co.,Ltd is a professional manufacturer with more than 10 years experience in the field. Located in one of the most developed economic circles in China, providing the best solutions with higher quality to our customers at a competitive price.
Discover solutions from Instrument Systems for testing LEDs, displays, and other kinds of light sources including high-performance spectrometers from UV to IR.
CRI Illuminance Meter is an entry-level solution for the measurement and evaluation of the illuminance, color temperature, and color rendering index (CRI) of various illumination sources such as LEDs and fluorescent lamps. It is most commonly used in restaurants, museums, studios, and theaters for accurate light measurements.
Introductions of Moresuperhardâ??s PCD inserts
In recent years, the development of cutting machine technology has continuously increased its spindle speed and feed rate, so that it can achieve rapid cutting with higher cutting speed, greater material removal rate, and higher precision. Tools like superhard materials put forward more demands. Only a few years ago, the spindle speed of some machine tools was only 6,000r/min, but now it has reached 30,000 to 40,000r/min, and the axis movement acceleration can reach 2G. With the support of powerful computer capabilities, this machine tool can realize the motion functions required for processing. In order to convert this speed advantage into a machining advantage at the point of action, it is necessary to use the corresponding tool material. However, if you use cemented carbide tools, the cutting speed can only reach 400m/min; while the cutting speed of PCD tools can reach as high as 3,000m/min. In addition to higher processing speeds, the main advantages of PCD and PCBN tools include longer tool life, and in most cases better surface quality, reduced tool changes, and reduced non-motorized man-hours. The following are some of the application areas of PCD and PCBN tools brought about by their high hardness and high wear resistance
Advantages of Moresuperhardâ??s PCD inserts
Strong corrosion resistant, perform a good thermal stability and red-hardness
CBN cutting tools have properties which resist chipping and cracking and provide uniform hardness and abrasion resistance in all directions. They may outperform conventional cutting tools by as much as 50 times.
The high chemical stability allows for PCBN to be stable up to 1000 C and no reaction with Fe, Ni, CO etc.
Cutting hard and tough Materials. CBN cutting tools are so hard that they can efficiently machine steel with hardness of Rc 45 and above
Easy grinding and EDM cutting. Uniform surface finish, surface finishes of less than 10 micron
Service:
Detailed Specifications can be customized!
Provide after-sales service.
Technical support on usage.
Return and exchange of products for non-human reasons.
About us:
MORESUPERHARD is a professional manufacturer of grinding, cutting, polishing and dressing tools. Thanks to abundant experience in surface treatment, we design and offer a complete grinding and dressing solution to our customers in various industries. With innovative and creative development conception, MORESUPERHARD is tirelessly striving to provide excellent design, superior quality and perfect service to world-wide customers. More than 1000+ customers benefit from our professional technical services.
Type: PCD block
Bond: Vitrified
Application: Various Industry
Specification: Customized
Packages: Hard carton
Delivery Time: 15 workdays by express
PCD block
In recent years, the development of cutting machine technology has continuously increased its spindle speed and feed rate, so that it can achieve rapid cutting with higher cutting speed, greater material removal rate, and higher precision. Tools like superhard materials put forward more demands. Only a few years ago, the spindle speed of some machine tools was only 6,000r/min, but now it has reached 30,000 to 40,000r/min, and the axis movement acceleration can reach 2G. With the support of powerful computer capabilities, this machine tool can realize the motion functions required for processing. In order to convert this speed advantage into a machining advantage at the point of action, it is necessary to use the corresponding tool material.
(1) PCD and PCBN tools for processing automobile engine cylinder blocks
In recent years, with the continuous development of my country's automobile industry, the automobile industry has become the backbone of the national economy. While continuously improving quality and performance, automakers are paying more attention to the efficiency and cost of component processing. The cylinder block is the key component of the engine, and its key processing parts include: crankshaft hole, cylinder hole, top surface, stop, etc.
(2) PCD and PCBN tools for processing automobile engine cylinder heads
From the perspective of the dimensional accuracy, position accuracy, shape accuracy and roughness requirements of each part of the cylinder head, tools such as milling, boring, and reaming are usually used. Among them, the bottom hole of the valve seat, the bottom hole of the pipe, and the Machining of valve seat cone and conduit hole.
(3) PCD tool for automobile gearbox processing
In the processing of gearboxes, hole processing is the main focus.
......
Service:
Detailed Specifications can be customized!
Provide after-sales service.
Technical support on usage.
Return and exchange of products for non-human reasons.
a professional manufacturer of grinding, cutting, polishing and dressing tools. Thanks to abundant experience in surface treatment, we design and offer a complete grinding and dressing solution to our customers in various industries. With innovative and creative development conception, tirelessly striving to provide excellent design, superior quality and perfect service to world-wide customers. More than 1000+ customers benefit from our professional technical services.
Introductions of Moresuperhardâ??s PCD slotter
More Superhard grooving tools are successfully used in many automobile and engineering industries for grooving aluminum and non-ferrous and ferrous metals. With high precision and multi-functional capabilities, reducing grooving time, increasing productivity and reducing through-put time with lower tooling costs.
Advantages of Moresuperhard PCD slotter
The special carbide substrate and high wear resistance of PCD material, effectively overcome easily cutting knife in the processing. PCD grooving tools for piston
PCD grooving tools with high precision, good wear resistance.
The PCD ring grooving tools' precision can reach 3 -4 m.
Piston is made of aluminum alloy containing more than 17% silicon, has strong wear resistance that needs more high wear resistant PCD tools to process.
The service Life of the welding PCD grooving tools is 10 -15 times that of carbide tools
Ewag precision Manual grinding machine
Technical team with over 10 yearsâ?? experience
Service:
Detailed Specifications can be customized!
Provide after-sales service.
Technical support on usage.
Return and exchange of products for non-human reasons.
About us:
MORESUPERHARD is a professional manufacturer of grinding, cutting, polishing and dressing tools. Thanks to abundant experience in surface treatment, we design and offer a complete grinding and dressing solution to our customers in various industries. With innovative and creative development conception, MORESUPERHARD is tirelessly striving to provide excellent design, superior quality and perfect service to world-wide customers. More than 1000+ customers benefit from our professional technical services.
Machining ferrous materials. Such as gray cast, cast iron, carbon steels, quenched steel, nickel and cobalt, other kinds of ferrous metal, etc.
More Superhard PCBN inserts are widely used in automotive, medical and aerospace machining industries. Such as
Shafts, gears, bearings, dies, molds
Clutch plates, brake rotors and drums, cylinder blocks, flywheels heads
Camshafts, valve bodies, impellers, casings, valve guides
Turbine blades, vanes, shrouds, housings, hip joints, pipe and liners, fuel rod
Valves seats, hydraulic pumps, cam lobes
Extrusion screws, barrels, turbine, case, housings, compressor hubs
insert type size info
L (mm) I.C (mm) S (mm) R (mm) D (mm)
TNGN110304 11 6.35 3.18
TNGN110308 11 6.35 3.18
TNGN110312 11 6.35 3.18
TNGN160404 16 9.25 4.76
TNGN160408 16 9.25 4.76
TNGN160412 16 9.25 4.76
Advantages of Moresuperhards PCBN Inserts
Strong corrosion resistant, perform a good thermal stability and red-hardness
CBN cutting tools have properties which resist chipping and cracking and provide uniform hardness and abrasion resistance in all directions. They may outperform conventional cutting tools by as much as 50 times.
The high chemical stability allows for PCBN to be stable up to 1000 C and no reaction with Fe, Ni, CO etc.
Cutting hard and tough Materials. CBN cutting tools are so hard that they can efficiently machine steel with hardness of Rc 45 and above
Easy grinding and EDM cutting. Uniform surface finish, surface finishes of less than 10 micron
Service:
Detailed Specifications can be customized!
Provide after-sales service.
Technical support on usage.
Return and exchange of products for non-human reasons.
About us:
MORESUPERHARD is a professional manufacturer of grinding, cutting, polishing and dressing tools. Thanks to abundant experience in surface treatment, we design and offer a complete grinding and dressing solution to our customers in various industries. With innovative and creative development conception, MORESUPERHARD is tirelessly striving to provide excellent design, superior quality and perfect service to world-wide customers. More than 1000+ customers benefit from our professional technical services.
249 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
