STEVE TRADERS: chef shirt made of 90% cotton and 10% polyester is a common type of chef uniform. This blend of fabrics offers a balance between comfort, breathability, and durability, which are essential qualities for clothing worn in a hot and demanding kitchen environment. Here are some key features and benefits of a chef shirt with this fabric composition:
Comfort: Cotton is known for its softness and comfort against the skin, making it pleasant to wear during long hours in the kitchen.
Breathability: Cotton is a natural fiber that allows air to circulate, helping to keep the wearer cool and comfortable, especially in a hot kitchen.
Durability: Polyester is a synthetic material known for its strength and durability. When blended with cotton, it helps the shirt withstand the rigors of kitchen work, including spills, stains, and frequent washing.
Easy Care: Polyester adds wrinkle resistance to the fabric, making it easier to maintain and requiring less ironing compared to 100% cotton garments.
Moisture Wicking: Polyester can help wick moisture away from the body, keeping the chef dry even in a high-temperature environment.
Color Retention: The polyester blend can help the shirt retain its color, even after multiple washes and exposure to kitchen elements.
* ETIXAMIN BIO-K is a nutritional speciality in water-soluble powder with a high percentage of Potassium complexed by free Amino acids obtained from the enzymatic hydrolysis process (FCHE). The product is created to improve the qualitative features of fruits and vegetables.
* ETIXAMIN BIO-K supplies Potassium and Amino acids (in free form and peptides form). Amino acids rapidly convey the complexed Potassium towards the fruits or vegetables, improving the formation of sugars, the biosynthesis of the precursors essential for flavour and aromas and the biosynthesis of the anthocyanins responsible for the rind colour.
* Moreover, the presence of a pool of free Amino acids activates the plant's resistance mechanisms to abiotic stress (high temperatures during the summer season, jump in temperature, drought, etc.) and supports the fruits and vegetables ripening stage.
How to use it?
* ETIXAMIN BIO-K can be applied by fertigation or by the foliar application during the ripening fruits and/or vegetables or in post-harvest on fruit trees to increase the nutrients accumulation on the hibernating buds.
What are the benefits?
* Enhances fruits or vegetables ripening uniformity;
* Increase qualitative features (colour, sugar content, etc.);
* Improves nutrients accumulations on the hibernating buds;
* Increases the plants tolerance to abiotic stress.
We are manufacture & sell sports soccer's uniform,football,goalkeeper gloves, shinguard ,socks,
boxing gloves, karate suits, etc
fashion clothes, shirts & t shirts 100% cotton, polyester, jackets, coats,jeans men and women etc.
The coex bubble plant, represents the state-of-the art machine among the torninovaÆs production range . It has got all the most sophisticated technologies for air bubble film production, in order to ensure the easy production to the customer, thanks to the full automation of the co-extrusion process, to reach a film with air-barrier effect, that keeps the air inside the bubble for a longer time. The main advantages of such air bubble film are:
Better cushioning protection compared with a thicker mono-extruded bubble film: the co-extruded bubble film offers higher air retention (thanks to the internal layer of PA6) and then ensures effective long-term cushioning performances from packing to final delivery. It means also extra strength of each bubble and then extra protection of the goods.
Better protection with thinner plastic film: it means better performance with less raw material consumption.
Reusable : his long lasting cushioning performances allows to use the same air bubble film for many times.
Recyclable : the co-extruded bubble film could be recycled with other polyethylene material
An air bubble film of 35 g/,2, produced by co-extrusion process, can be compared, in terms of resistance, with a mono-extrusion air bubble film of 55 g/m2. They have same resistance. Considering such relationship, it means that you save the 30% of the cost for raw materials, by using co-extrusion production process.
Mainly, it is composed by three extruders: one for PE layer, one for the PA6 layer and the third one for the TIE layer between PE and PA6. These three extruders, through the last generation of feed-blocks with adjustable geometry allow the production of the special co-extruded air bubble films with ABCBA structure.
You can easily understand the co-extrusion process through the following layout:
The COEX BUBBLE plant has got the following features:
Extruders with a.c. motors mounted in axis and with universal screws in wear-resistant steel, with modular profiles with barrier double thread, in different diameters according to the level of production requested. Every extruder is equipped with a filter and a gear pump with transmission by cardan joint and motor with inverter and feedback loop control. The gear pump, through PID control, adjust automatically the speed of the extruder according to the capacity requested by the production formula and to the desired extrusion pressure.
Two separated flat dies for an excellent control and adjustments of the produced films, realized in steel with adjustable deliveries. The feed-block with adjustable geometry, allows the distribution uniformity of the internal layer of polyamide (PA6) on the whole width of the film, also with thickness less than 0.5 micron.
Gravimetric blending and metering for the ingredients, for a more accurate and automated management of the granules to be extruded.
Forming unit climbed on guide and rack arms that allow the automated movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials delivery from the flat dies and for its fast interchangeability.
Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant . The production control occurs by formula that the operator can personalize according to the co-extrusion percentage he needs and to the speed of production.
The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature.
Width of the produced film: from 1.000 mm up to 2.500 mm (or more on request)
The plant can be equipped (also after installation, thanks to its modularity) with several accessories:
Moulder cylinder with bubble in different diameters
Perforation unit with brushless motor
Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films
Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing
Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder
Fast Loading system on the rewinder, that allows, in automatic way, to unload the produced roll with closing system by glue and the loading of the new carton core with application of ôhot-meltö glue.
The machines are fully customizable. Contact us to project the most suitable plant for your production and market necessity.
Harmonious and with a firm, spongy texture depending on
the varities and their harvesting periods. We supply fresh, and
high-end truffles suited to all recipes.
A special product which is the emblem of the haute cuisine
around the world. Chosen by chefs and food experts to ensure
the selection of excellent and exclusive truffles.
Machine that dryes the wood with the combined action of high
Levels of vacuum and heating plates. With this model you can get the fastest drying rates and
Highest drying uniformity.
It is especially recommended for the drying of semifinished wood products.
STEVE TRADERS Material: Customized, Wide Range for Your Selection.
Size: XS-XXXL,According to Customer's Specific Request.
ColoR : Multi-color optional, can be customized as Pantone No.
DesigN: Fabric,Size, Color, Logo, Tag, Printing, Embroidery are Welcome to Customized.
Sample TimE: 9-18 days. 9days without logo, 15days with logo.
Accessories Options: custom logo, custom hang tag, custom packing bags, custom labels, etc.
ShippinG: By sea, by air, by DHL/UPS/TNT, etc.
MOQ: 100 pcs.
Payment Term: Only 30% -50% Deposit.Make Your Floating Capital More Effective.
OtheR Accept Your Special Demands.Let You Save Time and Worries.
