Find Verified Ceramic Cartridge Suppliers, Manufacturers and Wholesalers

Filter cartridge

0.05-45micron kinds of filtration rating

Hawach spe cartridges are used in the pretreatment section of the sample being analyzed. When it is used for separation, the solution is generally left behind by gravity or with a vacuum device to speed up the separation. Our spe cartridges are divided into silica gel, polymer, adsorption type, the special cartridge according to matrix type. Spe cartridges consist of medical pp empty tube, medical pe sieve plate, and a fixed adsorbent.

The cartridge dust collector with the advanced properties of small size, big air flow volume, high filter efficiency, small investment which are widely used many industrial occasions for dust collection.

Zonel Filtech can provide the oblique installed filter cartridge dust collectors, vertical installed filter cartridge dust collectors, portable dust collector, silo dust collectors, etc.

Besides the dust filter machines, Zonel Filtech also provide replacement filter cartridges for cartridge dust collector for both Zonel made and other OEMs, and special size and usage filter cartridge can be customized.

this section of the ceramic substrate design concept is to allow high power, small size, high brightness LED use


development designed to replace a section merit system board, directly to multiple LED chip package on top,


and then by the second optical lens more compact size makes the product volume and let your light LED


products reduce the area, reducing materials, system cost, the human cost of replacing the assembly, so


that you package more quickly, Wire bonding the chip directly on the substrate, with the use of ceramic


heat with excellent results, but also allow your LED brighter and longer life.




This product suitable for high power LED's package, such as: LED lights

Product Description:
The glass cartridge have 3 size,1.5ml/1.8ml ,3 ml. One set is:bottle,cap and the rubber bottom.

cap and rubber buttom have grey and red color.

It is widely use for detal/insulin and other liquid medicine.

Its producing prodcess meet the medical package produce standard.

If you need more information,pls contact with me.

Price of product ( USD price or FOB price) :"
contact

Product origin :
China

Key Specifications/Special Features :
The glass cartridge have 3 size,1.5ml/1.8ml ,3 ml. One set is:bottle,cap and the rubber bottom.

cap and rubber buttom have grey and red color.

It is widely use for detal/insulin and other liquid medicine.

Its producing prodcess meet the medical package produce standard.

If you need more information,pls contact with me.

Minimum Order Size and Packgaing details :
MOQ: 10000pcs
Packaging: standard export package

Specification: 5-40

Precision: 1-60um

Color: White

Material: PP

Sintered Filter Cartridge Feature
1. Sintered filter cartridge is surface filtration
2. Sintered filter cartridge is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth
3. Sintered filter cartridge has uniform pore size distribution
4. Wire mesh will not shed in filtration process
5. High compression strength
6. High mechanical strength
7. High rigidity
8. High abrasion resistance
9. Good durability against most liquids, gases and aggressive steam
10. High temperature resistance
11. High filter rating accuracy
12. High filter efficiency
13. Good corrosion resistance
14. Washable and Cleanable
15. Reusable
16. Long service life

Sintered Wire Mesh Filter Cartridge Technical Parameter
Raw Material: SS 316L, SS 304
Filter Media: ZWEN Sintered Wire Mesh
Filter Rating: 0.5-300 Microns
Filter Efficiency: > 99.99 %
Maximum Operation Temperature: 816 degree celsius
Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others
Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector:
1. DOE
2. 220
3. 222
4. 226
5. Thread (NPT,BSP,G,M,R)
6. Flange
7. Special customization

Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry

Advantage:
1/ UF life Span +10years
2/ High Flux than Hollow fiber membrane
3/ High pressure backwash to recovery high flux
4/ Can work in 5-65C temperature.
5/ Mobile and comprehensive solution

Application:
1/ Industry wastewater treatment
2/ Municipal sewage treatment

Ceramic Shaft Sleeve for Slurry Pump and gravel pump is a kind of inorganic nonmetallic material. Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature.

Ceramic Slurry Pump spare parts is a kind of inorganic nonmetallic material. Its wear-resisting performance is 5 times of high chrome with Mohs hardness 8.9, only after Diamond and Cubic Boron Nitride. Compare with similar products, ceramic density is about 5% higher than others, and double flexural strength higher at normal temperature. The Ceramic Slurry Pump Parts mainly included impeller, Liners, Throat bush, Volute, Shaft Sleeve etc., the abrasion resistance of ceramic slurry pump parts are 5 times as wearable as high chrome slurry pump parts. However, the weight of ceramic spare parts is only 1/3 of chrome spare parts.

Slurry Pump Ceramic Shaft Sleeve which has undergone destructive field tests for over 18 months, has proved to extend part life several times that of steel shaft sleeves on the same pump, same service. Total maintenance costs and downtime were reduced accordingly. slurry pump ceramic shaft sleeves are precision formed of high-density alumina, fired, and ground to size. The hardness of ceramics (9.0 to 9.5 MOH Scale) resists this destructive action, In addition, the ceramic coated sleeve surface is highly polished which, together with its lower coefficient of friction, results in extended sleeve life and long service from the packing.

offers part codes for ceramic shaft sleeves include: B075J04, B075J05, C075J04, C075J05, CH075J04, CH075J05, CH076J04, CH076J05, D075J04, D075J05, E075J04, E075J05, F075J04, F075J04, FAM075J04, FAM075J05, FAM076J04, FAM076J05, PE075J04, PE075J05, PF075J04, PF075J05, G075J04, G075G05, SH075J04, SH075J05, SH076J04,SH076J05, GH075J04, GH075J05, GH076J04, GH076J05.