Diesel Gas Oil Ultra-Low Sulphur Diesel (ULSD) is a refined diesel fuel with significantly reduced sulfur content, meeting stringent environmental standards. It ensures cleaner emissions, improved engine performance, and fuel efficiency, making it ideal for modern diesel engines in transportation and industrial applications.
Diesel Oil EN590 ULSD PPM10 is a high-quality ultra-low sulfur diesel fuel with a sulfur content of 10 parts per million (PPM). It is designed for use in modern diesel engines, offering reduced emissions, improved engine efficiency, and compliance with stringent environmental standards.
Automotive Gas Oil (AGO) is a high-quality diesel fuel commonly used in transportation and heavy-duty vehicles. Known for its superior combustion properties, it ensures efficient engine performance, reduced emissions, and long-lasting reliability for vehicles and machinery.
Grade 54 Jet Fuel is a high-performance aviation fuel specifically designed for use in turbine-engine aircraft. It offers excellent fuel efficiency, reliability, and safety, ensuring smooth and safe operation under various weather and flight conditions, while meeting international aviation standards.
Original Jet A1 Fuel is a high-performance aviation fuel designed for use in turbine-engine aircraft. Known for its excellent combustion properties, it ensures safe, efficient, and reliable operation of aircraft, meeting international quality and safety standards.
66 Automobile Engines Suppliers
Short on time? Let Automobile Engines sellers contact you.
Jet A1 is a� kerosene-type fuel. Jet fuel or aviation turbine fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colorless to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1, which are produced to a standardized international specification. During the refining process only 8% of the crude oil is made up of Jet fuel.
D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world, it has other names.
Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2% water and one- half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400.
EN590 Diesel10PPM Ultra Low Sulfur Diesel ULSD is a premium diesel fuel EN 590 10 ppm is a type of diesel fuel with a sulfur content of 10 parts per million ppm Its a low emission diesel fuel thats ideal for power generators tower cranes construction trucks and excavators with diesel engines It conforms the European standard EN590 with an ultralow sulfur content of only 10 parts per million PPM This type of diesel is known for its environmental benefits and is widely used in modern diesel engines
Ultralow sulfur diesel ULSD is a cleanerburning diesel fuel that contains a maximum of 15 parts per million ppm of sulfur ULSD contains 97 less sulfur than lowsulfur diesel LSD which typically contains 500 ppm of sulfur The European Union began mandating the reduction of diesel sulfur content in 1993 and the United States started phasing in ULSD requirements for highway vehicles in 2006 It was developed to allow for the use of improved pollution control devices that reduce diesel emissions ULSD can significantly reduce emissions when used in combination with cleanerburning diesel engines and vehicles It may react with strong acids or strong oxidizing agents such as chlorates nitrates and peroxides You should avoid contact with heat sparks fire and oxidizing agents The appearance of ULSD should be clear and bright free from visible sediment and water
The full name of Jet Fuel A1 is the aviation Kerosene Colonial Grade 54 Jet Fuel JP 54 Jet fuel designed for use in aircraft powered by gasturbine engines It is clear to strawcolored in appearance The most commonly used fuels for commercial aviation are Jet A and Jet A1 which are produced to a standardized international specification Jet fuel is a mixture of a large number of different hydrocarbons The range of their sizes is restricted by the requirements for the product for example the freezing point or smoke point Kerosenetype jet fuel has a carbon number distribution between about 8 and 16 carbon numbers carbon atoms per molecule wide cut or naphthatype jet fuel including Jet B between about 5 and 15 carbon number Jet A1 is the standard specification fuel used in the rest of the world Jet A1 has a flash point higher than 38C 100 F with an autoignition temperature of 210 C 410 F
Fuel Oil is a fraction obtained from petroleum distillation either as a distillate or a residue Broadly speaking oil is any liquid petroleum product which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power except oils having a flash point of approximately 40 C 104 F Oil is made of long hydrocarbon chains particularly alkanes cycloalkanes and aromatics The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil heavier than gasoline and naphtha
Fuel oils are used as fuel for power generation marine bunkers and large industrial heating plants Fuel oil 180 CST also known as Bunker Fuel or Residual Fuel Oil is characterized by its viscosity which is measured in centistokes CST The number 180 indicates the maximum viscosity of the oil at 50 degrees Celsius This specification makes it a relatively thick and viscous fuel compared to lighter fuel oils Both CST 180 and CST 380 fuel oils are considered heavy fuel oils and are commonly used in the shipping industry They are often referred to as bunker fuels and are used in vessels like cargo ships container ships and oil tankers
With the experience in Toyota Parts Business over quarter of century , have made many contacts in the industry; both on Customer grounds & with the Suppliers worldwide. Established Annecto Trading (In Latin meaning "LINK") in 2013 in DMCC, in export free zone of Dubai, For its shipping & logistics it uses Emirates Logistics in Dubai as its strategic partner. Have made international trade through Annecto Trading to Russia, Africa , Asia already. Prime focus is Toyota & Nissan Genuine Parts.
