Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%.
Chemical Composition:
C:0.06 â?? 0.082%
Mn:0.75 â?? 1.05%
SI:0.13 â?? 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
Hot Selling Aluminium Ingot A7 99.7% & A8 99.8% best Price
Aluminium Ingot A7 99.7% And A8 99.8%. Once the aluminum scrap is collected and sorted, it is placed into a melting furnace and turned into molten aluminum at temperatures ranging from 1300 to 1400 degrees Fahrenheit. This molten aluminum cast into large slabs called ingots or billets. And since aluminum never loses its performance or strength during the recycling process, the same piece of aluminum can enter the secondary production process time and time again, multiplying the cost savings and environmental benefits. Not only does secondary aluminum production use less energy, it reduces landfill waste, contributes much lower greenhouse gas emissions and greatly reduces costly international transportation.
High purity copper ingot is a very special metal for us, as our activities encompass all aspects of the copper business, ranging from mining through smelting to fabricating. Hereunder, we will examine our achievements in the purification of copper as an example of our purification research. The tables below show analytical results of impurities in the worldâ??s purest copper (6N: 99.9999%Cu). This analysis was conducted by Glow-Discharge Mass Spectrometry (GDMS), which allows microanalysis of all elements. The result indicates the ultra-purity of the copper, proving that the quantities of all elements other than copper are below the detection limit. It is well known that ultra-high-purity metals possess very unique natures sharply different from those of ordinary metals.
High purity copper ingot as adding elements can be directly applied in aviation, space atomic industrial super alloy, and the development of new alloy, as well as the analysis of the standard sample. It can also be through mechanical processing preparation into high purity copper foil shielding materials for atomic reactor.
107 Iron Ingots Suppliers
Short on time? Let Iron Ingots sellers contact you.
We supply all kinds of Cast Iron Scrap with good price and good service.All the product is available contact us for more details.
Cast Iron Scrap for sale. Free from mud, dust, fluff, non ferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings, any organic waste and any other harmful substances. Dirt, dust rust, fluff and other impurities not allowed over 1%.
Type: HMS Scrap
Composition: iron Scrap Metal
Application: Melting
HMS Type: HMS1 & 2
Packaging Details: Bulk and Customers preferences
d) All scraps shall be free of explosive and oily materials and woody substance in any event.
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods.
Chemical Composition:
C:0.06 â?? 0.082%
Mn:0.75 â?? 1.05%
SI:0.13 â?? 0.28%
P: Max 0.035%
S: Max 0.045%
Ar: Max 0.15%
Heavy Melting Steel (HMS):
Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density.
The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods.
Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99%
Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99%
Electro copper Cathode Top Grade 99.99%
Dimension : 914mm x 914 x 12mm (appr.) (+/-1%) (LME Standard)
1. Weight of each sheet: 125kgs (+/- 1%)
2. Net weight of each pallet: 2mts (+/- 1%)
3. Min. weight in each container: 20mts approx.
4. Gross weight of each container: 22.20mts approx.
5. Copper (Cu) min% 99.99%-99.97% min
Packing: Palletized banded by aluminum bands
CONTACT TO PLACE AN ORDER
1.Detailes:
1).Weight: 125kg per sheet
2).Purity: 99.99%-99.97% min
3)..High quality, best price
4).COA, SGS certificate
5).Long term supply
2.Usage
Electric light industry, machinery manufacturing, Building industry ,defense industry,
and other fields Manufacturing industrial .
valves and fittings,Instrument sliding bearing.
3.Packing & Delivery
1).Packing:Weight of each sheet: 125kgs (+/- 1%),Net weight of each pallet: 2mts (+/- 1%),Min. weight in each container: 20mts approx,Gross weight of each container: 22.20mts approx.
2).Delivery:Within 7-10 days after received your prepayment
Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99%
Factory price Copper Cathode Plates/Copper Ingot/ Copper Cathode Cu 99.99%
Electro copper Cathode Top Grade 99.99%
Dimension : 914mm x 914 x 12mm (appr.) (+/-1%) (LME Standard)
1. Weight of each sheet: 125kgs (+/- 1%)
2. Net weight of each pallet: 2mts (+/- 1%)
3. Min. weight in each container: 20mts approx.
4. Gross weight of each container: 22.20mts approx.
5. Copper (Cu) min% 99.99%-99.97% min
Packing: Palletized banded by aluminum bands
CONTACT TO PLACE AN ORDER
1.Detailes:
1).Weight: 125kg per sheet
2).Purity: 99.99%-99.97% min
3)..High quality, best price
4).COA, SGS certificate
5).Long term supply
2.Usage
Electric light industry, machinery manufacturing, Building industry ,defense industry,
and other fields Manufacturing industrial .
valves and fittings,Instrument sliding bearing.
3.Packing & Delivery
1).Packing:Weight of each sheet: 125kgs (+/- 1%),Net weight of each pallet: 2mts (+/- 1%),Min. weight in each container: 20mts approx,Gross weight of each container: 22.20mts approx.
2).Delivery:Within 7-10 days after received your prepayment
Applications:
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminum is produced in the production of industrial waste. Such as: Scrap Aluminum Wire, Scrap
Aluminum block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted
auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste etc.
Aluminum scrap
Density: 2.702g/cm
Melting point: 660.37
Boiling point: 2467.0
Features: Free from Nuts, Steel plate, paint
Chemical Composition: AL
Appearance: Silvery White
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps
Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps
This is an aluminium cans scrap which is generated from beverage cans.
The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements.
If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply.
USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT.
Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps.
The integrity of the bundles must be as safe as they can be stacked for storage, and
bundle height must not exceed 1.50 meter.
UBC scrap Specification
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps
Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps
This is an aluminium cans scrap which is generated from beverage cans.
The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements.
If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply.
USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT.
Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps.
The integrity of the bundles must be as safe as they can be stacked for storage, and
bundle height must not exceed 1.50 meter.
UBC scrap Specification
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps
Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps
This is an aluminium cans scrap which is generated from beverage cans.
The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements.
If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply.
USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT.
Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps.
The integrity of the bundles must be as safe as they can be stacked for storage, and
bundle height must not exceed 1.50 meter.
UBC scrap Specification
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
1. Mainly used for melting ingot
2. Discontinuous melting with scrap
3. Easy control and operation
4. Fast melting
5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Our advantage: 1. We offer the most competitive prices. 2. We provide relevant professional product consulting. 3. We are willing to help customers find any potential products and merchandise. 4. You can visit our factory by yourself. Our success is inseparable from your support and making friends from all over the world in good faith. 5. Our aim is: integrity first; reputation first, best reputation; once cooperation, friends for a lifetime.
For more information about our product, please feel free to contact us.
Buy Aptamil Growing up 3 Milk Powder 800g online in Germany. Aptamil Growing Up Milk 1-2 years powder contains Pronutra Advance. Enhanced with Iron to help typical psychological turn of events. Healthfully custom-made to help your baby's turn of events.
Key features
Aptamil Growing Up Milk 1-2 years powder contains Pronutra Advance.
Enhanced with Iron to help typical psychological turn of events.
Healthfully custom-made to help your baby's turn of events.
Specifications
Brand: Aptamil
Origin: UK
Product Type: Baby Food
Weight: 800g
107 Iron Ingots Suppliers
Short on time? Let Iron Ingots sellers contact you.
