Find Verified Temperature Controllers Indicators Suppliers, Manufacturers and Wholesalers

With very narrow openings and with gratings which can withstand heavy payload Quality wire is specialized in supplying the same with extreme precision and best quality. Narrow opening gratings are very difficult to make as with close weldings there is extreme stress on the material there by the gratings tend to bend. With special controls and specialized after production process we achieve a obsolute flat panel even with such narrow openings. Stainless Steel and other high end alloys require precise control during process and we have specialized welding machines which produces the gratings with absolutely zero defects. Special cleaning process is used in making the grating panels there by we achieve the best surface finish on the gratings after welding. Our custom made gratings are very popular in the filtration process and used as Catalyst bed in the refinery and other oil & gas industries. Besides offering the gratings our engineers are capable of designing specific model gratings which can withstand high load and also design gratings for high pressure drop applications.
Quality
Our Gratings are made with precise mesh opening and with specific controls in our welding process we ensure the best quality welding. Each lots are identified with batch and lot numbers and These panels are checked for chemical composition of the raw material ; mesh opening and dimension tolerances and welding and shearing strength before it is delivered to our customer. This helps us to deliver the Grating panels exactly as per customer requirements.
Coating
Gratings in steel are hot dip galvanized or powder coated according to the requirements of the customers. Stainless steel and other copper nickel gratings are pickled and passivated according to the customer requirements.
Inventory/Shipment
With wide range of Grating products manufactured and supplied in various patterns and specifications we maintain minimum stock level on some of our fast moving products which allow us to pack and ship the goods immediately upon order confirmation. This immediate shipment concept works very well in many of the critical applications where by our customers are immensely benefit as this helps in reducing our customers down time.

Quality
Our wire mesh is made with precise mesh opening and with specific controls in our welding process we ensure the best quality welding. Each lots are identified with batch and lot numbers and These panels are checked for chemical composition of the raw material; mesh opening and wire diameter tolerances and welding and shearing strength before it is delivered to our customer. This helps us to deliver the wire mesh panels exactly as per customer requirements.
Coating
Welded wire mesh in steel is either hot dip galvanized or powder coated according to the requirements of the customers. Pre-galvanized wires are used to make the hot dip galvanized welded wire mesh and in some cases the mesh is made in mild steel and then hot dip galvanized according to the requirements of the customers.
Inventory/ Shipment
With wide range of welded wire mesh products manufactured and supplied in the above mesh specifications we maintain minimum stock level on our mesh products which allow us to pack and ship the goods immediately upon order confirmation. This immediate shipment concept works very well in many of the critical applications where by our customers are immensely benefit as this helps in reducing our customers down time.

With latest technology used in the production process there is a continuous demand for effective filtration with minimum slot opening which conventional woven wire mesh screens failed to provide. Wedge wire screens are welded wire screens with very minimum slot opening which behaves like a pipe and withstand huge suction or discharge pressure where by effective filtration takes place due to very sturdy structure of the same.

Manufacturing Process
Wedge wire screens are made out of triangular wires welded to flat wires to form a panel or ring . Continuous length triangular wires are welded to flat wire panels with special precision die tools in order to achieve the desired opening. The flat wire panels are holded in a die tool where by the triangular wires are moved in a traverse like a typical lathe machine application where by the welding takes place and the movement of the traverse determines the slot opening of the mesh.

Several die tolls with diameter range from 15MM to 700MM are developed and maintained in order to make screens with different aperture openings. The screens with smaller slot openings are made initially in cylindrical form and then cut and opened and flattened in order to achieve the flat opening screens.
Usage & advantage
High pressure filtration applications and in typical filtration applications where strong screens are required wedge wire screens are used. The usage of the screens provides the end user with effective filtrations with slot opening control maintained at the range of 0.1MM you achieve a screen which is very firm due to the support structures.

Wedge wire screens are used as well screens in the rigging application and quality wire can design and supply screens typically strong enough to be used in this rigging applications.

Typical Sand screens ; rigging screens; sea water intake screens; high pressure intake screens ;catalyst bed for dumping the catalyst are manufactured and supplied by Quality Wire Products Co W.L.L.. Besides for any application where a strong filtration system is required wedge wire screens can be used and the same offers effective solutions for filtration.

Cutback Bitumen ( Liquid Bitumen ) is Bitumen that is dissolved in a solvent . Typical solvents include Naptha, gasoline and kerosene, white spirit etc. The type of solvent controls the curing time while the amount determines the viscosity of the Cutback Bitumen.

The advantage Cutbacks have over Emulsions is a much higher residual Bitumen percent, typically over 80% compares with over 40-65% for Bitumen emulsions. The result is more Bitumen left on the roadway after curing, for the same volume of binder applied.

Application
Cutback bitumen’s suitable for primer sealing can also be used in the manufacture ofpre-mix asphalt, which is used in patch repairs.Cutback bitumen’s are used extensively in sprayed sealingapplications, particularly in cooler weather where theyprovide improved initial stone retention due to their

Price of Product (USD) : 503

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Cutback Classification

Cutbacks are divided into two classifications, Rapid-Curing (RC) and Medium-Curing (MC) depending on the solvent used. They are further defined by a number which indicates the minimum kinematic viscosity (fluidity) of the cutback.

Grades & Properties

Grade Curing Speed Viscosity Penetration of Residue
MC 30 Medium 30-60 120- 150
MC 70 Medium 70-140 120- 150
MC 250 Medium 250- 500 120- 150
MC 800 Medium 800- 1600 120- 150
MC 3000 Medium 3000- 6000 120- 150
RC 70 Rapid 70-140 80- 120
RC 250 Rapid 250-500 80- 120
RC 800 Rapid 800- 1600 80- 120
RC 3000 Rapid 3000- 6000 80- 120


Minimum Order size and packgaing detail

Palletizing is required for Cutback Bitumen & Emulsions -200kg drums shall be secured as 4 drums per pallet.

Anode butts are the residual electrode left in the electrode holder at the end of electrolysis with prebaked carbon anodes. The anode carbon is being consumed by ohmic resistive heat and electrolytic oxidation. However the part of anode just above the melt is being continuously subjected to high temperature reactions with fluoride melt and atmospheric oxidation, which ultimately results in impurities left in the discarded anode butts.At the end of their use, the left over part of the anode (called butts) are crushed and recycled to produce new anodes. However, while recycling the butts the built-up of sodium concentration is closely checked and controlled in order to avoid harmful effect of excess sodium in newly formed anodes. Good quality anodes should be oxidation resistant in gaseous environment in order to minimize oxidation on the expose surface (C + O2 2CO) [19]

Price of Product (USD) : 300

Product Origin : MERCO W.L.L BAHRAIN

contact us for more details

contact for more details

contact us for more details

Gas Turbine Engines (3 UNITS)
Kawasaki Heavy Industries, Ltd

Model MIT-26
Rated output 4347 KW 40 C
Rotational speed 22000/1500 min 1
Serial number KHI-790112
Month of production 2018-2
Kawasaki Heavy Industries, Ltd.

Hitachi
Decelerator
Model MPG160-23
Reduction ratio 14.618
Transmission power 4800KW
Output rotational speed 1500 min-1
Serial number PG02524
construction number 0A006846A
Manufacturing date 2018/2
T5000A-BER
Rated output 4000kW
Voltage 6600v
Frequency 50Hz
gas turbine MIT-26
Generator TAKL-SCKE
Serial number KHI791ABA1003-3
Manufacturing date 2018-3
Current 438A
Number of phases 3 �??
Height 3800 �?? width 3500 �?? depth 8500

Toshiba Emergency Synchronous Generators 3 units
Phase number 3
Number of poles 4
Voltage 6600V
Power factor 0.8
Rated continuous Phase number 3
Number of poles 4
Voltage 6600V
Power factor 0.8
Rated continuous
Output 5000KVA
Current 438A
Field voltage 70V
Annual operation time 1000 hours
Rotation speed 1500 min-1
Frequency 50Hz
Field current 455A
Output 5000KVA
Current 438A
Field voltage 70V
Annual operation time 1000 hours
Rotation speed 1500 min-1
Frequency 50Hz
Field current 455A
Refrigerant temperature 40 �?�° C
Field winding 155 (F)
Heat resistant class; Armature winding 155 (F)
AC exciter: Output 39 KVA
Voltage 55V
Current 410A
Field voltage 90V
Protection method IP20
Cooling method ICO 1
Mass 9660 Kg
Serial number 7154498BQA2000
Standard JEC-2130-2016

Hello
we have introduced Nutrition product like Egg- Protein Milk as well as White-egg Protein Milk specially for Pregnant woman. please see attached leaflet with full specs and application.

A heat exchanger is a system used to transfer heat between a source and a working fluid. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing, or they may be in direct contact.

Classification of heat exchangers:
1. Classification according to construction:
Tubular heat exchangers.
Plate heat exchangers.
Extended surface heat exchangers.
Regenerative heat exchangers.

Pipe in pipe heat exchangers:
Hairpin heat exchangers (often also referred to as â??double pipesâ??) are characterized by a construction form which imparts a U shaped appearance to the heat exchanger. In its classical sense, the term double pipe refers to a heat exchanger consisting of a pipe within a pipe, usually of a straight-leg construction with no bends. However, due to the need for removable bundle construction and the ability to handle differential thermal expansion while avoiding the use of expansion joints (often the weak point of the exchanger), the current U-shaped configuration has become the standard in the industry.

Hello Madam / Sir
I have source for running and out of order Steel rolling / re-bar plant, please contact any serious buyer if interested to buy and require any information related to plant.

Hello Sir/Madam
We have our associated facility to provide the Desing, Engineering & Procumbent of the Plant related to oil & gas, chemical plant, Textile industry & other industrial sectors.
let me contact for further information.