Karvan-L company has developed new method and technology for production of semifinished pentaerythritol-modified phthalic and glyptic lacquer modified by petroleum acids and vegetable oils. Priming, varnishes, enamels and paints are manufactured on their basis.
Materials were tested as per special assessment methodology of timber, metal coating protection ability, as well as coating systems for different aggressive environment. Lacquer materials are supplied with technical documentation, hygienic certificates confirming their designation and quality.
We offer package delivery of semifinished varnishes and varnish based materials, consulting services, selection of schemes and their application with provision of all required features.
Designed for protective and decorative finish of external faces of buildings and facilities with stone porous surface.
Protect from contamination and preserve initial natural state of stones. It may require tinting with coloured pigment paste.
Solvent: water.
Expenditure: 1 kg per 6-8 m2.
Drying time: hour at 200C.
Is the solvent for lacquer materials as per GOST 3134-78. It is used for solution of oily paints, varnishes and enamels. It is clear unclouded liquid. Viscosity du is not more than 0,795 g/m. Boiling range: start of boiling not more than 1600C, end of boiling not more than 2050C. Closed flash point is not less than +330C. Aromatic hydrocarbon content not more than 16%. Sulphur content not more than 0,025%.
Acryl emulsion based and used for binding upper substrata layers (plastering, concrete, brick), ensuring adhesion to subsequent paint layer. It contains antimicrobial component slowing down growth of bacteria and mould. Solvent:
Water. Expenditure: 1kg per 30-40m2 in single layer. Drying time: 2 hours at 200C
158 Metal Coatings Suppliers
Short on time? Let Metal Coatings sellers contact you.
"KARVAN-L" company is one of the first specialized entities manufacturing lacquer products in Azerbaijan. Work experience gained in construction market allows to manufacture lacquer materials both for large users and ad-hoc products adjusted to customer requirements.
Highlyskilled specialists of central plant laboratory develop the material formula with special features:
physical-mechanical parameters;
viscosity, adjusted to customer requirements;
different structure of painted surface;
frost-resistance, enabling savings during transportation and storage;
change in coating and whiteness;
changes in elasticity and firmness of top film layer.
Modern high-performance equipment, own scientific and research base allows the company constantly expand range of manufactured products and increases its quality.
Our company produces more than 50 types of lacquer products: masonry paints, priming, filler, enamel; lacquer materials for metal and timber protection; construction glue and sealers; pentaerythritol-modified phthalic varnish and sunflower oil, coloured and clear varnish for parquet, furniture and other timber materials. “KARVAN-L” products are certified by Azerbaijan Republic State Standard and SanEpidemNadzor (center of sanitary supervision and disease control) authorities.
Our company is a repeated winner of contests for supply of masonry paint, road striping coatings and other materials for Construction programs of Baku Government.
Water-dispersing acryl filler. It is used for elimination of surface defects and levelling for further painting. Filler is highly durable, dries fast, has no odour, soluble in water and good sanding properties.
Expenditure: 0,5-1,0 kg per 1m2.
Drying time: 4-8 hours at 200C.
Adhesive is prepared on the basis of acryl binder and forms durable adhesive coating. It is used in internal and external works of adhesion of ceramic tiles, gluing wood, cardboard, paper. This glue also is quite essential in housekeeping during small repair works. Drying time: 24 hours at 200C
High-quality gloss paint. It possesses excellent decorative and protective features. It is produced in different colours. Solvent: White s pirit. Expenditure: 130-150g per 1m. Drying time: 24 hours at 18-220C
Is alkyd varnish based enamel and provides durable coating, possesses excellent features. It is used for internal and external application. It is prepared as gloss and matt enamels, and flooring enamel.
Solvent: White spirit. Expenditure: 130-150g per 1m2.
Drying time: 24 hours at 18-220C
Imber is the most widely used ecologically clean material. It is designed for decorative finish. Clear Varnish with preservative is used for pest control, protection from mould and atmospheric impacts. Varnish is used for painting of furniture, wooden items, improves their appearance, adds brightness, prolongs service life.
Solvent: white-spirit.
Expenditure: 100-150 g per m2.
Coolant - antifreeze KL-A40M" intend for using in cooling system of petrol engine and diesel engine internalcombustion engine of all types vehicle. It is preserve necessary for operating envelope of temperature from 400C to + 1100C. Coolant - KL-A40M characterized by high performance attributes and represents optimal composition first-class monoetylenglikol highpurity, demineralized water and by unique complex anti-foam additives and additives-inhibitors, which averted rust formation and metal corrosion (copper, steel, aluminium, cast iron, brass, solder). High-efficient additives antifreeze parcel KL-A40M provides cooling system protection from incrustation, corrosion, heightened depreciation, cavitation, prevent from rubber swelling. Product not carries phosphates, amines, nitrites.
High quality alkyd based ready-to-use priming used for coating of surfaces with further enamelling. It is used to ensure firm and reliable connection of painted surface and lacquer materials. It is effective anticorrosion protection. It is produced in white, grey, red-brown colours.
Solvent: Xylain.
Expenditure: 100-150 per 1m2 in single layer.
Drying time: 24 hours at 200C
Is designed for interior works in dry locations, is highly economical and ecologically clean and highly wear-resistant.
Solvent: water.
Expenditure: 0,15 kg per 1m2.
Drying time: 2 hours at 200C
For external and internal painting works. It is designed for painting of buildings and facilities and for interior painting, is weather-resistant, water-resistant, wear-proof and ecologically clean. White coloured, coloured into different shades as per client’s requirements.
Solvent: water.
Expenditure: 1kg per 2-3 m2.
Specifications:
API SG/CD
Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
5 L metal container 4 units / case
20 L plastic container 1 unit / case
208 L drum
TECHNOL EXTRA 20W-50 has been formulated for both gasoline and diesel engines of passenger cars and light commercial vehicles of previous generation. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. It has thermal stability, antioxidant, antiwear and anticorrosion properties, contains detergent and dispersants that keep the engine clean and preserve its power.
Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
5 L metal container 4 units / case
7 L metal container 3 units / case
208 L drum -
TECHNOL TURBODIESEL 15W-40 has been formulated to fulfill the requirements of turbocharged and naturally aspirated diesel engines of light industrial vehicles, equipped with or without catalysts, operating under normal conditions. This engine oil possesses thermal stability, detergent and antiwear properties, provides resistance to oxidation and corrosion, and ensures immediate lubrication of engine components at cold starts. It is suitable for use under all operating conditions in all seasons.
Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
20 L plastic container 1 unit / case
208 L drum -
TECHNOL GEAR OIL 80W-90 GL-5 is an extreme pressure gear oil produced using selected high quality mineral base oils to fulfill stringent requirements of manual gearboxes, transfer boxes, rear axles, and differentials of passenger, commercial and industrial vehicles which require API GL-5. Its high viscosity index ensures excellent lubrication of moving gear components and improves gear shifts at very low and very high temperatures and its high thermal stability provides protection against deposit formation. This fluid has excellent antioxidant, antiwear, antifoaming, anticorrosion, antirust and load carrying properties.
Meets the requirements of:
Dexron III H
Ford Mercon
MB 236.20
Ford ESP M2C 166-H
Ford ESP M2C 138-CJ
CAT TO-2
Allison C4
Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
20 L plastic container 1 unit / case
TECHNOL ATF III H is a high quality automatic transmission fluid formulated for automatic, semi-automatic transmissions, and torque converters of passenger, light commercial and industrial vehicles that require GM DEXRON III H or Mercon. This fluid can also be used for hydrostatic transmissions, power steering and hydraulic systems. Having a high viscosity index, this fluid provides excellent resistance to corrosion and foam formation. It also has outstanding thermal stability, antioxidant, antirust, antiwear properties and offers high-level protection under all conditions. Its excellent friction properties meeting the requirements of GENERAL MOTORS Hydramatic ensure smooth gear shifting.
208 L drum -
158 Metal Coatings Suppliers
Short on time? Let Metal Coatings sellers contact you.
