Find Verified Isp Internet Service Providers Suppliers, Manufacturers and Wholesalers

Packaging:
0.9 kg plastic container 12
4 kg plastic container 1
15 kg plastic container 1
175 kg drum -

TECHNOL SOLIDOL is a water-resistant multipurpose calcium grease made of high quality mineral base oils and a calcium soap thickener. This grease is used in a wide range of applications, including lubrication of chassis, rolling and sliding friction units of various machines, and mechanisms operating under medium load and speed conditions. Thanks to its antioxidant, anticorrosion and antirust properties, this grease ensures protection against oxidation, corrosion and rust, extending the service life of the lubricated components. It provides excellent water resistance and possesses high mechanical stability. It is recommended for use in the temperature range from -25 C to 65 C.

Meets the requirements:
MB 229.1/229.3
VW 502.00/505.00
PSA B71 2300
RN 0700/0710


Specifications:
API SN/CF
ACEA A3/B4

Packaging:
1 L plastic 12 units / case
4 L plastic 4 units / case
5 L plastic 4 units / case
208 L drum -

TECHNOL GOLD 10W-40 is a synthetic technology engine oil that has been developed to cover the most stringent requirements of engines of both gasoline and diesel passenger vehicles. Satisfying rigorous standards by vehicle manufacturers, this engine oil provides resistance to oxidation with its high quality base oils and additives, ensures good engine cleanliness, reducing particle accumulation through efficient dispersant power, and long-term wear protection of parts, increasing engine life.

Specifications:
API SJ/CF
Packaging:
1 L plastic container 12 units / case
4 L plastic container 4 units / case
5 L plastic container 4 units / case
208 L drum -

TECHNOL SILVER 15W-40 has been developed to fulfill the most stringent requirements of both gasoline and diesel engines of passenger and light commercial vehicles. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. Thanks to its antioxidant, antirust, antifoaming, antiwear and anticorrosion properties, this engine oil provides resistance to oxidation and ensures good engine cleanliness. It has viscosity stability and can be used under all operating conditions in all seasons.

Meets the requirements of:
MB 228.1
MAN 3275
Volvo VDS-3
Deutz DQC III
CAT ECF-1a
Cummins CES 20077
Mack EO-N
MTU 2.0
Renault RLD-2
JASO DH-1

Specifications:
API CH-4/SJ
ACEA E7-2016

TECHNOL POWER 15W-40 is an engine oil formulated through the use of high quality base oils and additives to fulfill the requirements of trucks with heavy-duty engines used for long distances. Its high viscosity index and thermal stability enable proper lubrication of moving components of the engine under most severe operating conditions. Thanks to its outstanding dispersant and antiwear properties, this engine oil ensures good engine cleanliness and provides protection for the moving components of the engine. It is recommended for use in Euro 3 and the previous generation of engines of most American and European manufacturers.

Specifications:
API GL-5

Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
20 L plastic container 1 unit / case
208 L drum -

TECHNOL GEAR OIL 80W-90 GL-5 is an extreme pressure gear oil produced using selected high quality mineral base oils to fulfill stringent requirements of manual gearboxes, transfer boxes, rear axles, and differentials of passenger, commercial and industrial vehicles which require API GL-5. Its high viscosity index ensures excellent lubrication of moving gear components and improves gear shifts at very low and very high temperatures and its high thermal stability provides protection against deposit formation. This fluid has excellent antioxidant, antiwear, antifoaming, anticorrosion, antirust and load carrying properties.

Packaging:
0.9 kg plastic container 12
4 kg plastic container 1
15 kg plastic container 1
175 kg drum -

TECHNOL LITOL-24 is a multipurpose lithium grease formulated with high quality mineral base oils and a lithium soap thickener. It is suitable for use in plain and rolling bearings, sliding surfaces, friction units of wheeled and tracked vehicles, industrial, agricultural, and construction equipment and marine machinery for various purposes under extreme operating conditions. This grease possesses high viscosity and exhibits outstanding resistance to oxidation, wear, corrosion, and rust. It has been formulated to provide excellent protection against high temperatures, extreme pressure, and shock loads. It is recommended for use in the temperature range from -40 C to 120 C.

Specifications:
API CF

Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
5 L metal container 4 units / case
7 L metal container 3 units / case
208 L drum -

TECHNOL TURBODIESEL 15W-40 has been formulated to fulfill the requirements of turbocharged and naturally aspirated diesel engines of light industrial vehicles, equipped with or without catalysts, operating under normal conditions. This engine oil possesses thermal stability, detergent and antiwear properties, provides resistance to oxidation and corrosion, and ensures immediate lubrication of engine components at cold starts. It is suitable for use under all operating conditions in all seasons.

Meets the requirements of:
MB 228.1
MAN 3275
Volvo VDS-3
Deutz DQC III
CAT ECF-1a
Cummins CES 20077
Mack EO-N
MTU 2.0
Renault RLD-2
JASO DH-1

Specifications:
API CH-4/SJ
ACEA E7-2016

Packaging:
7 L plastic container 3 unit / case
20 L plastic container 1 unit / case
208 L drum -

TECHNOL POWER 15W-40 is an engine oil formulated through the use of high quality base oils and additives to fulfill the requirements of trucks with heavy-duty engines used for long distances. Its high viscosity index and thermal stability enable proper lubrication of moving components of the engine under most severe operating conditions. Thanks to its outstanding dispersant and antiwear properties, this engine oil ensures good engine cleanliness and provides protection for the moving components of the engine. It is recommended for use in Euro 3 and the previous generation of engines of most American and European manufacturers.

Meets the requirements of:
Dexron III H
Ford Mercon
MB 236.20
Ford ESP M2C 166-H
Ford ESP M2C 138-CJ
CAT TO-2
Allison C4

Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
20 L plastic container 1 unit / case

TECHNOL ATF III H is a high quality automatic transmission fluid formulated for automatic, semi-automatic transmissions, and torque converters of passenger, light commercial and industrial vehicles that require GM DEXRON III H or Mercon. This fluid can also be used for hydrostatic transmissions, power steering and hydraulic systems. Having a high viscosity index, this fluid provides excellent resistance to corrosion and foam formation. It also has outstanding thermal stability, antioxidant, antirust, antiwear properties and offers high-level protection under all conditions. Its excellent friction properties meeting the requirements of GENERAL MOTORS Hydramatic ensure smooth gear shifting.
208 L drum -

Meets the requirements of:
Cummins CES 20081
MB 228.31/228.51
MAN M3677/3477/3575/3271-1
Volvo VDS-4
RVI RLD-3/RLD-2
JASO DH-2
MACK EO-N Premium Plus
MACK EO-O Premium Plus
CAT ECF-3
Detroit Diesel 93K218
MTU Oil Category 3.1/2.1
Deutz DQC-IV-10 LA
Scania LA
Scania LDF-4
Voith Class B / MB 235.28

Specifications:
API CJ-4
ACEA 2016 E4/E6/E7/E9

TECHNOL POWER LD 10W-40 is a synthetic technology engine oil that has been formulated to satisfy the most stringent requirements of on-road trucks with heavy duty diesel engines. It is also suitable for use in most gasoline engines. This engine oil protects diesel engines equipped with post-treatment systems, such as diesel particulate filters (DPF), thanks to its specific Low SAPS technology (low content in Sulphated Ash, Phosphorus, and Sulphur). This engine oil provides outstanding resistance to oxidation and corrosion, contains detergents and dispersants that keep the engine clean and possesses antirust, and antiwear properties. Its high viscosity index and thermal stability ensure proper lubrication of moving components of the engine under most severe operating conditions. With its extended drain intervals, use of this engine oil helps reduce maintenance costs. It is recommended for use in Euro 4 and Euro 5 engines of most manufacturers.

Premium Halal Chicken Paws/Feet from Azerbaijan

Discover the exquisite taste and quality of our Halal-certified chicken paws and feet, sourced directly from Azerbaijan, a region known for its rich culinary traditions and commitment to Halal practices.

Product Highlights:

* Premium Quality: Our chicken paws and feet are carefully selected and processed to ensure you receive only the finest cuts with excellent texture and flavor.

* Halal Certified: We understand the importance of following Islamic dietary laws. That's why our products come with a Halal certification, providing you with peace of mind about the quality and compliance of our offerings.

* Azerbaijani Heritage: Experience the unique taste of Azerbaijan through our chicken paws and feet. This region's culinary expertise shines through in every bite, making them perfect for a wide range of dishes.

Why Choose Our Halal Chicken Paws/Feet?

* Versatile: Whether you're a home chef looking to create authentic dishes or a restaurant owner aiming to impress your customers, our chicken paws and feet add depth of flavor to soups, stews, broths, and more.

* Quality Assurance: We take pride in our commitment to quality and safety. Our products undergo rigorous quality checks to ensure they meet the highest industry standards.

* Delicious and Nutritious: Chicken paws and feet are not only delectable but also rich in collagen and other nutrients that can promote joint health and improve skin elasticity.

Order your Halal-certified chicken paws/feet from Azerbaijan today, and elevate your culinary experience to new heights.

Size: 11-13mm, 13-15mm+
Humidity of kernels - atletiko b 103c: 6, 0 %;
Broken with mechanical damages: 0, 5 %;
Shrunken, underdeveloped: 1, 0 %;
Rancid, mustiness: 1, 0 %;
Dockage with nutshell and with a touch: 0, 2 %;
Ph û value: 6, 2;
Fattiness: 45-68%;
Proteins: 16-22 %;
Ash content: 2, 5 %;
Cadmium: max. 50mg/kg
Lead: max.500mg/kg


In jute sacks per 40-50 kg

Heavy metal scrap

Bulk and also in 20"containers in loose packing.