An integral part of our company’s activity is the fabrication and installation of vinyl windows and doors. The doors can be of different models and types of opening. We fabricate and install windows and doors using the following profiles.
The industry today is capable of producing vinyl, which is ideal for vitrification in all climatic conditions. The profiles for northern latitudes have thicker walls and partitions inside. The thicker is vinyl, the better its energy-saving ability. The number of chambers in such systems is three or more.
The uniform width of vinyl frames enables to carry out glazing in conformance with windows and underline the design integrity. The door vinyl is decorated using the same materials and same technology as that for the windows. Which implies all items being of one color and style.
The excellent noise insulation will allow you to enjoy a warm conversation with your friends. For now, the disturbing noise will not distract you from your pleasant home chores. Installing additional multifunctional glasses, you will enjoy a tender sunlight in the summertime and have a shield that reflects the heat back into your house in winter.
Glass doors are the integral part of architecture today. This is a fantastic choice for any kind of premises, from business centers through to apartments.
One may think glass is not a strong material, but it is a misconception. Tempered glass manufacturers have long been offering the product that easily provides a good heat and noise insulation and boasts an outstanding strength and long life.
Broad product range
The broadest selection of glass doors, fittings and door cases enables to pick a door for any indoor scene.
Quality
High quality glass from world’s top manufacturers.
Simplicity
Leaf made of environmentally friendly and easily maintainable material.
Safety
Safety in use – tempered glass is very strong and does not form sharp splinters if broken.
Long life
Always the same appearance throughout the life.
Hdpe/ldpe t shirt bags (with or without logos), die cut bags (with or without logos), patch handle bags (with or without logos), side and bottom seals and shrink film (shrink wrap)..
Glass partitions represent a very good designer solution. They visually extend the room space and improve movement of light. Fully transparent all-glass partitions and doors can be used in office, production and trading premises as well as for facade shopwindow glazing. Furthermore, translucent structures can represent different models: various degrees of mattness and tint, decorated with fretwork and logos. Stained-glass windows are most popular of them.
Glass partitions are fabricated of up to 20 mm thick shutterproof tempered glass, which improves the light flux up to 85%.
Glass Partitions Provide The Following Advantages
The all-glass partitions represent an advantage in that they do not visually cumber the rooms or obstruct the light flux.
The all-glass office partitions and doors are secured to walls and ceiling with special fasteners; this is an advantage compared to frame-type translucent partitions as their installation takes less time and is easier, plus there is no need to use non-transparent fastening elements.
A glass partition today is not only a cost effective and convenient but also a lovely item. Such partition will fit just nice into the interior.
Office glass partitions installed in premises allow deploying a big number of employees due to the better noise suppression. This helps improve the psychological environment and ensure it benefits the productive teamwork.
The thick shutterproof glass keeps warmth inside and creates a cozy atmosphere to each employee’s request.
The glass partitions and doors are durable, heat-resistant, require no maintenance and are virtually safe.
It often happens that people confuse glass panes and vinyl windows. These are not synonyms, however. A glass pane is a part and nearly crucial part of a window structure. This is a translucent structure consisting of two or more glasses that are fixed (glued) together along the outline using spacing bars and sealant compounds.
Main functions of a glass pane: natural lighting, thermal and noise insulation.
Glass panes are categorized by manufacturing process:
standard, where molecular sieve is poured into a metal or vinyl spacer, after which the glued glass sheets are plastered along the edge with silicon, isomelt, polysulfide or polyurethane sealant compound, thus providing the secondary sealing.
Warm edge technology-based manufacture This is a new and promising technology. It differs from the standard technology in that instead of several production steps as in the case with glass pane it involves only two (flexible spacer application, pressing), thus greatly saving time and cost. Such glass pane is warmer than that manufactured using a standard technology.
As defined in GOST 24866, glass pane are categorized as follows:
by number of chambers. A space between each two glass sheets is called a chamber. Glass panes can be single-chamber (two glass sheets), double-chamber (three glass sheets) and so on.
by width The glass pane width is the full width considering its glass and air part. Glass panes can be 14, 16, 18, 20, 22, 24, 28, 32, 36, 40, 42, 44 etc. mm
By glass type:
regular
energy-efficient glass with low-emission coating (hard or soft, also known as - or I-type)
noise-resistant triplex
sun-screening tinted or film-coated glass
shutterproof glass with a high protection class.
Quick details:
Place of origin: Baku,Azerbaijan
Material: HDPE
Thickness: 1.8-4.9 mm
Item: Sewage polypropylene pipes PPH
Rating: IP65
Certification: ISO9001
Color: White
Standard: OHSAS 18001
Specification: As your requirement
OD: 50-200 mm
Length: 250-3000 mm
Packaging & delivery:
Depends on your order.
Description:
Pipes made of PPH “homogeneous polypropylene” are used for the construction of internal sewer network. High physical-mechanical properties make these Pipes resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Pipes. As distinct from PVC Pipes, they have high impact resistance.Our offers Pipes made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry.Taking into consideration biological neutrality of material, Pipes can also, be used in food manufacturing industry. Sewage Pipes and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000.
Technical characteristics
Polypropylene sewage Pipes are 15 – 20 times lighter than similar cast iron Pipes. They are resistant to impact of detergent agents and also, there is no need to paint the Pipes. Availability of socket helps to connect them easily. Warranty period is over 50 years.
• Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C)
• Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances
• Resistance to hydraulic friction
• Leak connections by sealing rubber rings
• Ease of pipes and fittings facilitates transportation and installation work.
• As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration
• Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
Quick details:
Place of Origin: Baku,Azerbaijan
Specification: Depends on your requirement
Size: 78*78-325*380
O.D: 50-100 mm
Model Number: HDPE
Thickness: Depends on your requirement
Color: White
Material: PE
Standard: OHSAS 18 001
Types: Clamps,Elbows 45°,Elbows 90°,Couplings, Reducing couplings,T-Joints 45°,T-Joints 90°,Cross T 45°.
Packaging & delivery:
Depends on your order.
Description:
Installation of pipes to the interval sewer network uses from PPH “Homogen polypropylene” fitings .High physical-mechanical properties make these fittings resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Fittings. As distinct from PVC Fittings, they have high impact resistance.
Our offers fittings made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry.
Taking into consideration biological neutrality of material, fittings can also, be used in food manufacturing industry. Sewage fittings and their socket details are made of high quality white or gray colored granulated propylene.
Process of production is carried out in accordance with the requirements of ISO 9001:2000.
Technical parameters:
Polypropylene sewage fittings are 15 – 20 times lighter than similar cast iron fittings. They are resistant to impact of detergent agents and also, there is no need to paint the fittings. Availability of socket helps to connect them easily. Warranty period is over 50 years
• Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C)
• Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances
• Resistance to hydraulic friction
• Leak connections by sealing rubber rings
• Ease of pipes and fittings facilitates transportation and installation work.
• As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration
• Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
Quick details:
Place of Origin: Baku,Azerbaijan
Specification: Depends on your requirement
Size: Depends on your requirement
Model Number: HDPE
Thickness: Depends on your requirement
Color: Black,White
Material: PE
Standard: OHSAS 18 001
Packaging & delivery:
Depends on your order.
Description:
Until recently in the construction of sewage wells used only concrete and iron structure. However, it is much better to use plastic manholes.
Plastic wells used in the networks of household, storm sewage and lubricant. Plastic wells are also used for arranging industrial technological channels. Wells provide access to drains, shut-off and control valves and measurement technology. In addition, they can be used as drainage, rain receivers and inspection chambers.
Plastic wells nesomnitelnymi have the following advantages compared to other types of wells (concrete, cast iron, brick)
• a small proportion (compared with concrete)
• easy installation, transportation and storage
• easy maintenance
• long service lines and trouble-free operation
• high impact resistance material
• connection leaks
• resistance to mechanical damage, corrosion resistance
• ductility of the material, its resistance to low temperatures, abrasion, UV radiation.
• resistance to aggressive chemical environments
• blocking leakage of sewage into the soil
• high strength of the well shaft
• lack of height restrictions
• complete sealing of all joints and penetrations
• Products are not afraid of frost and mechanical loads.
Offered by our company options polyethylene manholes are used for a variety of purposes sama, subdivided into:
• Inspection
• Stormwater
• Drainage
• For measuring devices and valves
• In order to establish the electrical, instrumentation and automation
Also polymer wells divided by functionality:
Sight - allowing to carry out maintenance work, which are used in floatable, household and storm water channels.
Heavy - intended to collect rainwater, often with sand trap.
Perepadnaya - allowing you to connect a channel on a mark above the bottom of the tray portion of the well.
Cable plastic well to order - for laying the cabling in the electrical connection.
Distribution of plastic wells - sharing household and sewer racks for several tanks settling.
PRODUCT: Lithium ( spodumene)
ORIGIN: Nigeria
QUANTITY: Trial Shipment l,000MT within 35 days after received LC, Monthly shipment up to
30,000MT
PRICE CIF CHINA:
Grade 5.0% - 5.499% price shall be paid at US$460/metric ton
Grade 5.5%- 5.999% price shall be paid at US$510/metric ton
Grade 6.0%- 6.499% price shall be paid at U560/metric ton
Grade 6.5%- 6.99% price shall be paid at US$610/metric ton
Grade 7.0%- 7.499% price shall be paid at US$660/metric ton
Grade 7.5% - 7.99% Price shall be paid at US$710/metric ton
Grade 8.0% - 8.499% price shall be paid at US$760/metric ton
Grade 8.5% - 8.999% price shall be paid at US$810/metric ton
2
Grade 9.00% and above price shall be paid at US$860/metric ton
QUALITY: Li: 9% BASIS WITH 5% MIN (rejection below 4%)
PHYSICAL SIZE: 0 - l00MM 90% MIN
(If buyer requires crushing to smaller size then it would require a little higher price)
PACKING: Containers loaded in bulk, or in bulk vessel shipment.
SHIPMENT: 35 days maximum after received of irrevocable confirmed Letter
of Credit
PORT OF LOADING: Apapa port Lagos, Nigeria
PORT OF DESTINATION: CIF China Port.
INSPECTION: CCIC International (CCIC International is a Chinese Inspection
Institution)
90 % PAID AT LOADING PORT TO MINER WITH CCIC INSPECTION PAID
BY MINER
10% AT UNLOADING PORT WITH CCIC INSPECTION PAID BY BUYER
TERM OF PAYMENT*: By 100% Non-Transferable, Irrevocable confirmed Documentary
Letter of Credit from a prime bank payable at sight for 90% pro
visional (Bill of lading, invoice, packing list, Q and Q) at origin port and 10% at destination. port
PROCEDURES:
LITHIUM ORE exportation Procedure*
THE PROCESS BEGINS WITH DIRECT BUYER TO ISSUE A LETTER OF INTENT WITH
THEIR BANKING ON IT TO:
MR. ....
NIGERIA GRW AGENCY
4, NURUDEEN STREET, OFF AKINREMI STREET, ANIFOWOSHE,
IKEJA, LAGOS,
NIGERIA.
NOTE:
(1) THE LC WILL GO TO THE DIRECT MINER
(2) GRW HAS A SIGNED AND SEALED MARKETING CONTRACT WITH THE MINER TO HANDLE
THE MARKETING OF THE MINEâ??S ORES
(3) BUYER CAN BE AT LOADING
3
Then the following is the rest of the procedure:
1. Buyer and Seller Sign Contract.
2. Buyer issues LC draft, and seller issue 2% PB draft
3. Seller confirms LC draft, and Buyer confirms 2% PB draft
4. Buyer issues his irrevocable non-operative Letter of Credit at sight in
favor of the seller. (It will be the direct miner)
5. The Seller issues a performance guarantee (2%PB) in favor of the buyer
to activate the Letter of Credit.
6. Shipment commences as per agreement.
7. Seller summits documents
Origin:egypt,mexico,indonesia
all Fe
Buyer sends Letter of Intent LOI;
Seller issued FCO in favor of the buyer;
Buyer issued ICPO with soft probe permission according Seller conditions
written in FCO;
Seller verifies Buyer ICPO through Seller Bank and sends NCNDA and
IMFPA.
Buyer signs and seals NCNDA and IMFPA and return to Seller;
Seller would release draft contract to Buyer.
Contract negotiation begins over emails between Buyer and Seller;
Final draft contract sign electronically by both sides - Buyer and Seller;
Mine site visit would be arrange within 1-2 days after the final contract is
signed and sealed if requested by the end buyer;
Within seven (7) banking days the Buyers bank sends the non-operative, non-
transferable Documentary Letter of Credit;
Commodity: Indonesia Steam Coal
Kcal: GCV ADB 4900-6800 kcal/kg
Supply Ability: 50.000 MT/ month up to 300.000 MT/Month
Port of loading: South Kalimantan or East Kalimantan
Price Guarantee: Price held firm for 3 month (excluding government increases in taxes).
Delivery Schedule: According to mutual agreement
Term of Payment:
We accept payment through:
-100% Irrevocable, Confirmed, Non-Transferible, Documentary Letter of Credit at sight or
-100% Stand buy Letter of Credit or
-100% Bank Guarantee
We issued 2% Performance Bond after receiving some or above payments.
PROCEDURE:
1. Buyer sends Letter of Intent LOI;
2. Seller issued FCO in favor of the buyer;
3. Buyer issued ICPO with soft probe permission according Seller conditions written in FCO;
4. Seller verifies Buyer ICPO through Seller Bank and sends NCNDA and IMFPA.
5. Buyer signs and seals NCNDA and IMFPA and return to Seller;
6. Seller would release draft contract to Buyer.
7. Contract negotiation begins over emails between Buyer and Seller;
8. Final draft contract sign electronically by both sides - Buyer and Seller;
9. Mine site visit would be arrange within 1-2 days after the final contract is signed and sealed if requested by the end buyer;
10. Within seven (7) banking days the Buyers bank sends the non-operative, non-transferable Documentary Letter of Credit;
11. Within seven (7) banking days Seller would provide 2% performance bond which would automatically activate the DL/C.
12. Delivery and shipment commence as per schedule mutually agreed in the contract.
We are waiting for your ICPO with soft probe permission
Product: UREA 46 Granulated premium grade B agricultural use.
PRICE:
Payment Terms:
Prepayment of 20% of the lot amount within 3 (three) working days from the date of signing the contract and an invoice
Payment of the remaining 80% done at destination port after verification by SGS and sealing by SGS of the provision of all shipping documents, a quality certificate from the manufacturer's factory and state certification bodies for products.
Contract will be made with Refineries direct mandate.
Corresponds to certificates
TDS 2018-2010
Reach No 01-2119463277-33-xxx
CAS No 57-13-6
ES: No 200-315-5
WE safety class 3
(Urea) premium grade B
Customs code 3102 10 100 0
Nitrogen 46% - 46.2
Humidity 0.3 max
Free ammonia absent 160 Pxt Ppm max
Biuret 1.0% maximum
Harmful substances 100% free from harmful substances
Melting point 135 degrees Celsius
Granulation from 1 mm to 4 mm 94%
Granulation from 2 mm to 4 mm 70%
Color white standard or white pure
Smell odorless
Boiling decomposes to boiling
Radiation non-radioactive
Physical state solid at 200c, 101 kPa white granules
Specific Gravity Solid at 200c Solid 20C,-1.335 T/MI
Molecular weight 60.05
Fertilizer granular 2500mt 2 mt %
Prill 96% max
Moisture max. 0.2%
Alkalinity max. 0.01%
Iron max. 0.001%
Components insoluble in water max. 0.005%
Residue after firing max. 0.002%
pH (10% solution) max. ten%
Packing: Big-Bag 1000 kg
