Find Verified Advertising Equipments Materials Suppliers, Manufacturers and Wholesalers

Specifications:
API SG/CD
Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
5 L metal container 4 units / case
20 L plastic container 1 unit / case
208 L drum

TECHNOL EXTRA 20W-50 has been formulated for both gasoline and diesel engines of passenger cars and light commercial vehicles of previous generation. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. It has thermal stability, antioxidant, antiwear and anticorrosion properties, contains detergent and dispersants that keep the engine clean and preserve its power.

Approvals:
MB-Approval 229.51

Meets the requirements of:
BMW LL-04
GM DEXOS 2
RN0700/0710
MB 229.51/31/226.5


Specifications:
API SN/CF
ACEA C2/C3

TECHNOL PLATINUM 5W-30 is a new generation of Low SAPS (low content in Sulphated Ash, Phosphorus, and Sulphur) engine oil specifically formulated to meet the technical requirements of gasoline and diesel engines of new vehicle models. Its Low SAPS technology makes it the lubricant of choice for optimal operation of engines of the latest generation, equipped with anti-pollutant devices. This engine oil ensures the optimal functioning of three-way catalytic converters and particulate filters and compliance with performance levels declared by vehicle manufacturers, and Euro V environmental standards. Its excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance under all circumstances.

Specifications:
API SJ/CF
Packaging:
1 L plastic container 12 units / case
4 L plastic container 4 units / case
5 L plastic container 4 units / case
208 L drum -

TECHNOL SILVER 15W-40 has been developed to fulfill the most stringent requirements of both gasoline and diesel engines of passenger and light commercial vehicles. This engine oil is perfectly adapted to vehicles equipped with catalysts and using unleaded fuel. Thanks to its antioxidant, antirust, antifoaming, antiwear and anticorrosion properties, this engine oil provides resistance to oxidation and ensures good engine cleanliness. It has viscosity stability and can be used under all operating conditions in all seasons.

Packaging:
0.9 kg plastic container 12
4 kg plastic container 1
15 kg plastic container 1
175 kg drum -

TECHNOL LITOL-24 is a multipurpose lithium grease formulated with high quality mineral base oils and a lithium soap thickener. It is suitable for use in plain and rolling bearings, sliding surfaces, friction units of wheeled and tracked vehicles, industrial, agricultural, and construction equipment and marine machinery for various purposes under extreme operating conditions. This grease possesses high viscosity and exhibits outstanding resistance to oxidation, wear, corrosion, and rust. It has been formulated to provide excellent protection against high temperatures, extreme pressure, and shock loads. It is recommended for use in the temperature range from -40 C to 120 C.

Specifications:
API CF

Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
5 L metal container 4 units / case
7 L metal container 3 units / case
208 L drum -

TECHNOL TURBODIESEL 15W-40 has been formulated to fulfill the requirements of turbocharged and naturally aspirated diesel engines of light industrial vehicles, equipped with or without catalysts, operating under normal conditions. This engine oil possesses thermal stability, detergent and antiwear properties, provides resistance to oxidation and corrosion, and ensures immediate lubrication of engine components at cold starts. It is suitable for use under all operating conditions in all seasons.

Meets the requirements of:
Cummins CES 20081
MB 228.31/228.51
MAN M3677/3477/3575/3271-1
Volvo VDS-4
RVI RLD-3/RLD-2
JASO DH-2
MACK EO-N Premium Plus
MACK EO-O Premium Plus
CAT ECF-3
Detroit Diesel 93K218
MTU Oil Category 3.1/2.1
Deutz DQC-IV-10 LA
Scania LA
Scania LDF-4
Voith Class B / MB 235.28

Specifications:
API CJ-4
ACEA 2016 E4/E6/E7/E9

TECHNOL POWER LD 10W-40 is a synthetic technology engine oil that has been formulated to satisfy the most stringent requirements of on-road trucks with heavy duty diesel engines. It is also suitable for use in most gasoline engines. This engine oil protects diesel engines equipped with post-treatment systems, such as diesel particulate filters (DPF), thanks to its specific Low SAPS technology (low content in Sulphated Ash, Phosphorus, and Sulphur). This engine oil provides outstanding resistance to oxidation and corrosion, contains detergents and dispersants that keep the engine clean and possesses antirust, and antiwear properties. Its high viscosity index and thermal stability ensure proper lubrication of moving components of the engine under most severe operating conditions. With its extended drain intervals, use of this engine oil helps reduce maintenance costs. It is recommended for use in Euro 4 and Euro 5 engines of most manufacturers.

All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units:
Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use;
A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles;
A stamp device for application of “steps”;
an oil station;
Grooved guillotine shears for the dimensional cutting of tile effect roofing;
A stacker for receiving finished products;
An ACS of the line for specification of the number and the length of received products.

All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units:

Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use;
A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles;
A stamp device for application of “steps”;
an oil station;
Grooved guillotine shears for the dimensional cutting of tile effect roofing;
A stacker for receiving finished products;
An ACS of the line for specification of the number and the length of received products.

All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units:

Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use;
A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles;
A stamp device for application of “steps”;
an oil station;
Grooved guillotine shears for the dimensional cutting of tile effect roofing;
A stacker for receiving finished products;
An ACS of the line for specification of the number and the length of received products.

All the tile effect roofing manufacture equipment for of various brands consists of the following standard process units:

Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use;
A rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles;
an oil station;
Grooved guillotine shears for the dimensional cutting of tile effect roofing;
a stacker for receiving finished products;
An ACS of the line for specification of the number and the length of received products.

Electromechanical console uncoiling machine for rolled metal products with a load capacity of 7 tons (load capacity of 10 tons optional); the uncoiling machine is equipped with sensors that monitor metal loops which are used to coordinate the unwinding speed of the roll with a speed of profiling block. It is the CONSOLE TYPE of an uncoiling machine that allows for an easy change of rolled metal products, which saves up to 30 pct of the time in use;
a rolling mill for profiling (shaping) rolled metal products into suitably shaped (branded) metal profiles;
A stamp device for application of “steps”;
An oil station;
Grooved guillotine shears for the dimensional cutting of tile effect roofing;
A stacker for receiving finished products;
An ACS of the line for specification of the number and the length of received products.

General Specifications:

Installed power of the lines: 14 kW
Rolling speed: from 8 to 12 lin m/min
Accuracy of rolling along the length: ± 2 mm per 6 m
Quantity of reduction mills: from 14 to 17 pieces
Lifting capacity of the uncoiling machine: 7 tons (10 tons)
Attendants: 1 person
Maximum overall dimensions of the used roll:
Width: 1,250 mm;
Outer diameter: 1,600 mm;
Inside diameter: 500…600 mm.
Receiving stacker length: 6 m
Space required to accommodate the manufacture of tile effect roofing (LxWxH): 30,000×10,000×4,000 mm.
Working temperature range for equipment operation: from +2 to +40 o

We are glad to offer you from our partner company:

Product: Class A Food Grade (hot) & (cold) PET Flakes
Origin: Bangladesh
Prices Valid Till: 31st, January, 2022


FOB: COLD WASH

Clear Pet Flakes $612.50USD per Ton

Green Pet Flakes $562.50 USD Per Ton


FOB: HOT WASH

Clear Pet Flakes $712.50 USD per Ton

Green Pet Flakes $662.50 USD Per Ton
If the Buyer shares interest, We can bring forth the Seller. Before placing a trial order the Buyer is more than welcome to visit Sellers facilities for materials inspection. If you need any samples to test then the Seller can provide, the Buyer just needs to issue their DHL Account Number.

Size, Cm : 50*50
Unit - M2
Price, Usd Ex-works Vat Exclusive : 4.7
Weight, 1 Piece: ( Kg) - 4.45
Number Of Tiles In 1 (one) Pack: ( Pieces) - 6
Volume Of Tiles In 1 (one) Pack: ( 2 ) - 1.50
Weight Of 1 (one) Pack: ( Kg) - 26.7
Number Of Packs On 1 (one) Pallet: ( Pieces) - 48
Volume Of Tiles On 1 (one) Pallet: (2 ) - 72
Weight Of 1 (one) Pallet: ( Kg ) - 1310

Weight, 1 Piece: ( Kg)
Number Of Tiles In 1 (one) Pack: ( Pieces)
Volume Of Tiles In 1 (one) Pack: ( 2 )
Weight Of 1 (one) Pack: ( Kg)
Number Of Packs On 1 (one) Pallet: ( Pieces)
Volume Of Tiles On 1 (one) Pallet: ( 2 )
Weight Of 1 (one) Pallet: ( Kg )

Size, Cm : 50*50
Unit - M2
Price, Usd Ex-works Vat Exclusive : 4.7
Weight, 1 Piece: ( Kg) - 4.45
Number Of Tiles In 1 (one) Pack: ( Pieces) - 6
Volume Of Tiles In 1 (one) Pack: ( 2 ) - 1.50
Weight Of 1 (one) Pack: ( Kg) - 26.7
Number Of Packs On 1 (one) Pallet: ( Pieces) - 48
Volume Of Tiles On 1 (one) Pallet: ( 2 ) - 72
Weight Of 1 (one) Pallet: ( Kg ) - 1310

Size, Cm : 50*50
Unit - M2
Price, Usd Ex-works Vat Exclusive : 4.7
Weight, 1 Piece: ( Kg) - 4.45
Number Of Tiles In 1 (one) Pack: ( Pieces) - 6
Volume Of Tiles In 1 (one) Pack: ( 2 ) - 1.50
Weight Of 1 (one) Pack: ( Kg) - 26.7
Number Of Packs On 1 (one) Pallet: ( Pieces) - 48
Volume Of Tiles On 1 (one) Pallet: ( 2 ) - 72
Weight Of 1 (one) Pallet: ( Kg ) - 1310

Size, Cm : 50*50
Unit - M2
Price, Usd Ex-works Vat Exclusive : 4.7
Weight, 1 Piece: ( Kg) - 4.45
Number Of Tiles In 1 (one) Pack: ( Pieces) - 6
Volume Of Tiles In 1 (one) Pack: ( 2 ) - 1.50
Weight Of 1 (one) Pack: ( Kg) - 26.7
Number Of Packs On 1 (one) Pallet: ( Pieces) - 48
Volume Of Tiles On 1 (one) Pallet: ( 2 ) - 72
Weight Of 1 (one) Pallet: ( Kg ) - 1310