Find Verified Acrylic Yarn Suppliers, Manufacturers and Wholesalers

our factory located in Azerbaijan.we have in our stock cotton yarn 100% Ne-20/1 (Nm-34/1) , Ne-12/1 (Nm 20/1) ,Ne-10/1 cotton yarn and 100% Ne-20/2 ring cotton yarn.
All the necessary documentation and analysis (HVI) is available. Price range 1900-2800 $.
EX-Work.Bank payment.
Price is discussed individually.

raw silk yarns 40/44 D (215 ) and 27/29 D (310).paments 100%.EXWork.delivery 4-5 days

SVEZA Deck 350 is a special film faced plywood with a grid pattern intended for slab formwork. It comes with 25, 50, and 100 mm grid patterns. These types of lines simplify plywood marking and cutting, as well as rebar placement. This allows to reduce labor costs at the construction site.

Production process of plywood with layout grid is patented.*

SVEZA Deck 350 is a high-strength plywood made of 100% birch veneer, all layeers are smooth, without cavities inside. Its edges are coated with special acrylate-based waterborne paint with low water permeability.

SVEZA Deck 350 surface is smooth, and coated with wear resistant film (wearing capacity is 350 Taber test rotations).

* Registered in the State Register of Utility Models RF 01.20.15, RF patent number 150519.


Standard sizes: 1220 2440 8mm
1250x2500x18mm
1250x2500x21mm

Acryl emulsion based and used for binding upper substrata layers (plastering, concrete, brick), ensuring adhesion to subsequent paint layer. It contains antimicrobial component slowing down growth of bacteria and mould. Solvent:
Water. Expenditure: 1kg per 30-40m2 in single layer. Drying time: 2 hours at 200C

Water-dispersing acryl filler. It is used for elimination of surface defects and levelling for further painting. Filler is highly durable, dries fast, has no odour, soluble in water and good sanding properties.
Expenditure: 0,5-1,0 kg per 1m2.
Drying time: 4-8 hours at 200C.

Adhesive is prepared on the basis of acryl binder and forms durable adhesive coating. It is used in internal and external works of adhesion of ceramic tiles, gluing wood, cardboard, paper. This glue also is quite essential in housekeeping during small repair works. Drying time: 24 hours at 200C

Stable development of our country directly depends on competitive ability of domestic products, which, in its turn, depends on quality control (i.e. level of testing labs).
Specificity of analytic labs requires special system of their competitiveness recognition. Their accreditation synthesizes general approaches to accreditation of testing labs and peculiarities of analytic operations. In relation with it the actual is application of international standards:
1.management system of lab quality and application of standards
2. Lab-information systems in quality management system
3. Modern analytic equipment and automatization of separate processes in lab activity.
Karvan-L” company lab repeatedly passed accreditation in Azerbaijan State Committee of Attestation, accreditation certificate No. AZ 031.01.11.02.49.07 dated on 14.03.2007. Lab possesses modern equipment for conduction of wide range of analysis in oil chemistry and oil-chemical and organic synthesis, as well as of initial products of synthesis. Particularly, Karvan-L” company lab is fitted by up-to-date machinery for quality control of oily acids, and initial raw material for production of paintwork materials based on pentophtalein, acryl, vinilcetate, polyurethane and etc. film-making clay compositions, driers, initial components of alkyds, acryl, and polyurethane enamels and emulsions, water and oil soluble inhibitors of corrosion, deemulsifiers, additions to oils, oil solvents, aromatic carbohydrates, processed oils and paints, plant oils, sewage of analogical production.

It has been decades that architectural glass sheets have been utilized as a construction material. Over this time, manufacturers have achieved a significant success in terms of fabrication and finishing technology, bringing the glass properties almost to perfection. Increasingly pronounced in glass industry is the nanotechnology sector, which renders it specific and extraordinary properties in terms of operation and aesthetics, thus opening new bright perspectives for architects and designers.

It would be fair to say that it was new safe multilayer glass items that helped discover most significant improvements of properties and capabilities of glass as a construction material. All valuable operation and technical properties of such glass are achieved by using a “sandwich” principle, i.e. by creating a multilayer composite structure with a polymer layer in between. It is still difficult to appreciate the whole significance and implications of this development.

Regrettably, many issues of perfecting the technology and equipment that helps create multilayer glass (triplex production equipment) have been outside researchers’ focus of attention, thus hindering the practical development across the entire range of safety glass application. Most new properties are still unknown and require serious theoretical and experimental developments to uncover. Among these: detailed study of formation and development of multilayer glass production technology based on innovative polymer materials with a higher strength compared to existing materials, research of properties and application of hybrid structures based on new composite elements.

The combination of fragile glass and plastic materials (for instance: polycarbonate and glass sandwich panels, glass and acryl tile etc.) enables to optimize the functionality of multi-layer shutterproof glass. It is beyond doubt that ongoing researches in this area will boost the improvement of existing and development of new approaches to designing and creating multilayer glass machines for industrial-scale production.

1 Butadiene 1-3, Crude C4, Butene -1
2 Methyl tert-butyl ether (MTBE)
3 Iso-butane (iC4)
4 Ammonia
5 Phtalic - Anhydride
6 Melamine Crystal
7 Methanol
8 Paraxylene
9 Orthoxlyene
10 Mixed Xylene
11 Urea
12 Monoethylene Glycol (MEG)
13 Diethylene Glycol (DEG)
14 Anti-freeze
15 Monopropylene Glycol (Chemical Grade) â?? (MPG)
16 Sodium hypochlorite
17 Caustic soda
18 Paraffin
19 Petroleum jelly (Vaseline)
20 Formaldehyde (formalin)
21 Etoxylated alchole 7 mol
22 PEG 400 Chemical Grade
23 SLES 70
24 LABSA
25 Betaein
26 Oleic Acid
27 Loramide
29 Carbon Black
30 Methyl Ethyl Ketone (MEK)
31 Secondary Butyl Alcohol
32 Toulene Diisocyanate (TDI)
33 Methyl Diisocyanate (MDI)
34 Nitric Acid
35 Chloridric Acid
36 Styrene Monomer
37 Phosphoric acid
38 Sulfuric Acid
39 Diammonium Phosphate
40 Granular Sulfur
41 Ammonium Sulphate
42 Dioctyl Phthalate (DOP)
44 Isobutyl Acetate
45 Triacetin
46 Diethyl Ether
47 Sodium Sulfite
48 Lacquer Nitrocellulose
49 Methyl Acetate
50 N-Butyl Acetate
52 Sodium Metoxide
53 Nitrodor
54 Nitrocellulose (Type A)
55 Diethyl Phthalate
56 Dioctyl Adipate
57 Dioctyl Terephthalate
58 Dioctyl Sebacate
59 Dibutyl Phthalate
60 Dimethyl phthalate
61 Phosphoric Acid
62 Di Calcium Phosphate
63 Phenyl Acetic Acid
64 Ammonium Nitrate Sulfate
65 Diisobutyl Phthalate
66 Sodium Nitrite
67 Acetyl Tri Butyl Citrate
68 Acetyl Tri Ethyl Citrate
69 Ethyl Acetate
70 Ethyl Cellulose
71 Cellulose acetate
72 Hydrogen Peroxide
73 Ethanol
74 Butyl Acetate
75 Linear Alkyl Benzene(LAB)
76 Heavy Alkylate(HAB)
77 Normal-Paraffin(NP)
78 Alkyd Resin
79 Unsaturated polyester Resin
80 Phenolic Resin
81 Bakelite
82 Fatty Acid
83 Solid Epoxy Resin
84 Furani Resin
85 Amino Resin
86 Vinyl Ester Resin
87 Saturated Polyester Resin
88 SB Acrylic Resin
89 Emulsion
90 Morpholine
91 N-formyl morpholine
92 Amino imidazoline
93 Amido imidazoline
94 Triazine
95 Carboxylic acid
96 Maleic Anhydride
97 Sodium Metabisulfite
98 Sodium Sulfite
99 Catalyzed Sodium Sulfite