Application 5-6 ton loader
Rated power 140KW
peak power 200KW
Rated torque 440Nm
peak torque 1200Nm
Peak speed 8300rpm
Maximum system torque 6516Nm
total weight 450kg
dimensions 820*593*795mm
Model Number
RAD6500
Frame
0
Rated Speed
3039RPM
Rated Power
140KW
Motor Mounting Type
Flange
Type
Synchronous Motor
Frequency
4250rpm
Phase
Three-phase
Protect Feature
IP67
Efficiency
95%
Product Name
5T Battery Electric Loader System 144KW 200kw 540v
Rated power
140KW
peak power
200KW
Ratedtorque
440Nm
peak torque
1200Nm
Peak speed
8300rpm
gear ratio
5.43/1.95
Maximum system torque
6516Nm
total weight
450kg
dimensions
820*593*795mm
Vehicle features:
1. The drive system outputs two power sources, one for the front axle and the other for the rear axle. The power system is a dedicated system for loaders and is equipped with disc brake discs.
2. The working pump and the steering pump are driven by the upper motor.
3. All batteries are liquid-cooled batteries, and the control system is standardly equipped with a thermal management system.
4. It is equipped with an operating handle for controlling the upper components.
Performance
parameters Specification Size range Specification
Vehicle weight 700kg wheelbase 420mm
Standard Bucket Capacity 0.02m3 Track ground length 1150mm
Working device form backhoe Minimum ground clearance 80mm
Power 9KW/12.5 hp
10KW/13.5 hp
8.3KW/12 hp
7.6KW/10 hp Chassis width 730mm
Maximum digging radius 2050mm Track width 150mm
Maximum excavation depth 1400mm Shipping length 2200mm
Maximum excavation height 2350mm full vehicle height 1880mm
Maximum unloading height 1600mm radius of gyration 1100mm
Multi-way valve Imported from hydraulic pump
Adopt an off-road vehicle four-wheel drive system of Automotive continuously variable transmission training bench
One, five manual variable speed (with clutch assembly, clutch control mechanism, etc.);
Two, transfer box assembly (with shift mechanism)
3. Rear drive shaft assembly, rear drive axle assembly (including rear axle housing, main reducer, differential speed device, left and right rear drive half shaft, left and right rear brake assembly, etc.);
Four, front drive shaft assembly, front drive axle assembly (including rear axle housing, main reducer, differential speed device, left and right rear drive half shaft, left and right rear brake assembly, etc.);
I. Automotive continuously variable transmission training bench function:
The four-wheel drive drive system is arranged according to the position of the original car and reasonably connected through the mobile platform.
1, large area deep anatomy manual transmission and clutch, transfer box, front and rear drive axle, brake, different parts with different colors
Logo, intuitive embodiment of manual transmission and clutch, transfer box, front and rear drive axle, brake and other external and internal structure and composition
Relationship (each moving part is clearly visible);
2, intuitive embodiment: the structure and working principle of the four-wheel drive drive system of the car.
Two, dynamic demonstration function:
Driven by a reducer, the speed of the input shaft is 10~15 RPM.Operate the working process of the four-wheel drive drive system and demonstrate the working principle of the four-wheel drive drive system.
1, the actual dynamic demonstration clutch and shift operation, can easily change each gear, fully reflect the transmission line and manual transmission
The running state of each gear;
2, the actual dynamic demonstration of the operation of the transfer box, can easily change the driving mode, fully reflect the transmission line and drive mode operation of the transfer box
State;
3. Demonstrate the working condition of the Automotive continuously variable transmission training bench and the working principle of the universal joint;
4, dynamic demonstration of reducer and differential working process and working principle;
5. Dynamic demonstration of brake working process and working principle;
Reasonable industrial modeling, comprehensive safety protection, equipped with mobile casters, with beautiful and generous, high safety factor, convenient and so on.
60m3 Loading Capacity Wheel Belt Type Mining Muck Loader
Product Description
The multifunctional mine muck machine is a new type of loader developed to improve labor intensity and work efficiency. The machine can directly transport rocks to the conveyor belt. The machine adopts full hydraulic control mode, which is simple and convenient to operate. The gantry frame of the machine is detachable and non-cut, which is convenient for installation in the well. In addition, the height of the rear unloading can be adjusted according to the customer's own needs. The machine is equipped with an adventure device to solve the danger of manual exploration. This machine can be used in a cave below 2.2 meters, and the loading capacity per hour is between 40-60m.
Application
Mine slag raking machine is mainly used for phosphate ore, aluminum ore, iron ore, copper ore, , silver ore, lead-zinc ore and other mines, hydropower, tunnel projects in narrow-space mining operations. And transportation, construction and loading. The mining slag raking machine is a combination of a manipulator and a conveyor. The slagging and conveying and loading functions are combined into one. The production device adopts an electric full hydraulic control system. It has the characteristics of safety, environmental protection, low energy consumption, and high efficiency. It is an indispensable advanced mining equipment for mining enterprises and a substitute for labor and other machinery.
Specification
Model : ZWY60
Loading capacity m3/h : 60
Weight kg : 3100
Digging width mm : 3000
Digging height mm : 2150
Digging depth mm : 500
Digging distance mm : 1400
Gradeability : 5
Unloading height mm : 1300 Can be heightened
Unloading distance mm : 1500 Can be lengthened
Minimum turning radius 5
Power kw : 11
Walking speed km/h : 1.45
Maximum passing size of material mm : 600 450
Wheelbase mm : 1480
Wheel distance mm : 1180
Adaptation dimensions m : 2.2 2.2
Product dimensions mm : 5500 1550 1650