Performance
parameters Specification Size range Specification
Vehicle weight 700kg wheelbase 420mm
Standard Bucket Capacity 0.02m3 Track ground length 1150mm
Working device form backhoe Minimum ground clearance 80mm
Power 9KW/12.5 hp
10KW/13.5 hp
8.3KW/12 hp
7.6KW/10 hp Chassis width 730mm
Maximum digging radius 2050mm Track width 150mm
Maximum excavation depth 1400mm Shipping length 2200mm
Maximum excavation height 2350mm full vehicle height 1880mm
Maximum unloading height 1600mm radius of gyration 1100mm
Multi-way valve Imported from hydraulic pump
Engine
Model WEICHAI WD10G178E25
Engine type 6 cylinders, in-line, water colling, 4-stroke-cycle, turbocharge engine
Rated engine speed (rpm) 1850
Horsepower ( HP ) 160
Min. fuel consumption(g/kWh) â?¤215
Piston displacement(l) 9.726
Number-Bore X Stroke(mm) 6-126x130
Maximum torque (N m/rpm) 830/1150
Power Transmission System
Torque converter 3-element, 1- stage, 1- phase
Transmission Planetary gearing, hand manipulated, hydraulic shift, forced lubrication, 3 forward and 3 reverse speeds
Bevel gear Spiral bevel gear, splash lubrication, single-stage speed reduction
Steering clutch Wet, multi-disc, spring loaded, hydraulically separated, hydraulic control
Steering brake Wet, band type, pedal hydraulic booster, with parking brakes
Final drive Double reduction of spur gear, splash lubrication
Hydraulic System
Pump type Gear pump 07441-67503
Working pressure (Mpa) 13.7
System discharge(L/min) 250 (at engine speed 1850rpm)
Working cylinder type Double acting piston pump
Working cylinder lift number- Bore x Rod x Stroke (mm) 2-110 x 65 x 1026
Working cylinder tilt Bore x Rod x Stroke (mm) 160 x 70 x 140
Undercarriage System
Type Swing type of sprayed beam, suspended structure of equalizer bar
Carrier rollers 2 (each side)
Track rollers 7 (4-single flange, 3-double flange)
Track type Sealed, circular arc, triangular -grouser
Number of track shoes 44 (each side)
Width of track shoes(mm) 1070
Pith(mm) 203.2
Length of track on ground (mm) 3140
Coolant and Lubrication
Fuel tank (L) 320
Hydraulic tank (L) 108
Engine oil 20
Torque converter, transmission, bevel gear, steering clutch (L) 122
Final drive (L) 31 (each side)
LW156FV is a product independently researched and developed by top brand. It is equipped with national engine, high-quality split type double change, four-wheel drive, full hydraulic steering, strong power, higher efficiency and stronger environmental adaptability.
Features
PLC touch screen control,easy to operate.
Easy to operate key control interface.
Parallel and smooth width adjustment silk bar
Fast, smooth, accurate retrieval and positioning.
Small footprint.
Double cycle tank chain structure.
With SMEMA signal.
Specifications
Model MNLD-330-H
Dimensions 5004751400mm
PCBÂ size 50 50-330 250mm
Power source AC 1P 110V/220V 50/60HZ Max.100VA
Conveyor speed 6s
Conveyor height 900 20mm
Conveyor direction L-R or R-L optional
Weight Approx.90Kgs
Application 5-6 ton loader
Rated power 140KW
peak power 200KW
Rated torque 440Nm
peak torque 1200Nm
Peak speed 8300rpm
Maximum system torque 6516Nm
total weight 450kg
dimensions 820*593*795mm
Model Number
RAD6500
Frame
0
Rated Speed
3039RPM
Rated Power
140KW
Motor Mounting Type
Flange
Type
Synchronous Motor
Frequency
4250rpm
Phase
Three-phase
Protect Feature
IP67
Efficiency
95%
Product Name
5T Battery Electric Loader System 144KW 200kw 540v
Rated power
140KW
peak power
200KW
Ratedtorque
440Nm
peak torque
1200Nm
Peak speed
8300rpm
gear ratio
5.43/1.95
Maximum system torque
6516Nm
total weight
450kg
dimensions
820*593*795mm
Vehicle features:
1. The drive system outputs two power sources, one for the front axle and the other for the rear axle. The power system is a dedicated system for loaders and is equipped with disc brake discs.
2. The working pump and the steering pump are driven by the upper motor.
3. All batteries are liquid-cooled batteries, and the control system is standardly equipped with a thermal management system.
4. It is equipped with an operating handle for controlling the upper components.
