Lightweight silicone thermal pad for ev battery / two part thermal gap filler grease / thermal gap pad / thermal conductive insulator / silicone putty pad / silicone thermal tape / thermally phase change material.
iFixes i704 RTV Silicone Rubber Sealant Glue features thermal conductivity, strong adhesive and insulation, suitable for electronic components and CPU heat dissipation, fast repair of electronic product PCB boards, electronic components, CPU chips, etc.
Features:
1. Strong adhesion and good sealing performance.
2. Waterproof and moisture-proof, insulating, resistant to electricity, high and low temperature.
3. Insulation, arc resistance, sealing and leakage prevention, can be used for insulation, sealing and leakage prevention of electronic components, power strips and other electrified products.
4. After curing, silicone sealant can work normally in various harsh environments, improve the stability of the equipment, and resist high and low temperatures.
5. Use a long-tail rubber dropper, which is convenient, fast and accurate in applying rubber.
6. Black and White two colors are available.
7. It is widely used in the bonding and sealing of electronic components, semiconductor materials, electronic and electrical equipment, waterproof sealing of instruments and meters, potting of electronic components, etc.
Please note that paste glue can only be sent by special way (usually economy mail).
Acrylic sealant is a one component, paintable and flexible, mildew resistant acrylic sealant formulated for sealing of gaps and joints where slight movement or vibration causes conventional, non- elastic fillers and putties to crack and fall out. It had good adhesion to most porous surfaces without primer and is economy yet environmental friendly that can be cleaned up with water.
CHARACTERISTICS:
1.Excellent flexible.
2.Paintable.
3.Ready to use.
4.It can be cleaned with soap and water.
5.Durable waterproof and anti-mildew.
6.Non slump - can be applied to vertical surface.
7.No pollution and low odor.
8.It can be used indoor decoration and construction purpose.
MAIN USE:
For caulking, sealing and decoration uses in waterproofing, gap filing, wood frame joints, doors & windows sash, drywall, plaster,marble, tile & brick works, painters sealant for interior works.
COLORS:
White, black, grey and other colors based on customer's requirement.
PACKING:
It is available in 300ml disposable plastic cartridges, and 590ml sausages.
STORAGE:
When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 9 months from the date of manufacture.
MAIN USE:
1.Specially used for windshield and side glass of bus, car, railway vehicle (metro, high-speed rail), ship, spaceflight, engineering machinery vehicle, carriage and special vehicle.
2.For glass steel and plastic accessories (car roof, side body and car front).
3.For metal, plastic, and glass which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force.
CHARACTERISTICS:
1.One component formulation.
2.Modest hardness after curing.
3.Flexible, durable and excellent extruding performance.
4.No need primer to glass.
5.No sagging, no pollution and corrosion to base material and environment.
6.Excellent sealing performance, excellent water and aging resistance.
PACKING:
It is available in 300ml cartridges, and 590ml sausages.
COLORS:
Black & other OEM colors.
STORAGE:
When stored at 25 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture.
4215 Non Metallic Elements Suppliers
Short on time? Let Non Metallic Elements sellers contact you.
Neutral silicone sealant
1.Manufacturer of silicone sealant in over 15years.
2.We insist on good quality with competitive price to make clients satisfied.
3.Final price will be determined by more details confirmed.
4.Free samples available,delivery cost is to be paid by clients.
5.OEM/ODM available.
6.Health and safety considerations
7.LT: 7-15days.
CHARACTERISTICS:
1.Good weather resistant ability.
2.One-component,moisture curable,excellent thixotropy,easy to apply.
3.Persistent water proofing.
4.Good adhesion, excellent adhesion to most building materials.
MAIN USE:
It's suitable for the sealing of the joints of all kinds of architectural doors and windows, and the assembly and sealing of doors and windows glass. Not suitable for structural bonding.
COLORS:
Clear, white, black, grey and other colors based on customer's requirement.
PACKING:
It is available in 280mm and 300ml disposable plastic cartridges, and 590ml sausages.
TRANSPORTATION:
This product is transported by non-dangerous goods.
STORAGE:
When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture. INT-795 clear sealant has a shelf life of 12 months from the date of manufacture.
Netural Silicone Sealant T-600 is a one component,high quality moisture curing neutral silicone sealant designed for sanitary applications where non-corrosive, moldproof and chemically resistant properties are required. It is suitable for sealing of connection joints between varieties of substrates in wet areas.
CHARACTERISTICS:
Mold & mildew proof.
Resistant to cleaning agents. Maintains its flexibility at temperature extremes.
Highly elastic, 25% movement capability.
UV, water and weather proof.
Non-corrosive neutral cure.
Fast curing. Low odor.
Interior/exterior use.
Non-sag.
MAIN USE:
1.Sealing applications of joints around bathtubs,showers and sinks.
2.Sealing of joints between tiles, ceramic, metal sheets and walls.
3.Sealing expantion joints in tile walls.
4. Sealing of connection joints between walls and floors.
5. Sealing of joints between glazing and supporting substrates.
PACKING:
It is available in 280ml and 300ml disposable plastic cartridges.
COLOR:
Clear and other colors based on customer's requirement.
STORAGE:
When stored at 25 or lower temperature in the original unopened container, it has a shelf contact:
INTRODUCTION:
Acetic Silicone Sealant t300 is one-component, acetoxy cure, high quality silicone sealant designed for big glass and other general purpose glazing and waterproofing application. It has high tensile strength and good elasticity, excellent weatherability, stability,waterproof and good adhesion to most construction materials without a primer.
MAIN USE:
1.Fixing and glazing for glass structural for all kinds of architectural curtain wall.
2.Jointing and sealing for all kinds of ornamental glass engineering.
3.Big glass panels, aquarium, swimming pool sanitary works and other glass engineering.
COLOR:
Clear, white, black, grey and other colors based on customer's requirement.
PACKING:
240ml/260ml/280ml/300ml per pcs; 24pcs per carton.
TRANSPORTATION
This product is transported by non-dangerous goods.
STORAGE:
When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 12 months.
CONTACT:
Acetic silicone sealant
1.Manufacturer of silicone sealant in China over 15years.
2.We insist on good quality with competitive price to make clients satisfied.
3.Final price will be determined by more details confirmed.
4.Free samples available,delivery cost is to be paid by clients.
5.OEM/ODM available.
6.Health and safety considerations
7..LT: 7-15days.
Easy of use all temperature gunability.
Primerless adhesion upon curing will form a strong bond to most common building components without the use of a primer.
Long-life reliability cured sealant stays elastomeric from -50 C to 150 C without hardening, cracking or becoming brittle under normal weather conditions.
like Dow Corning 789 Silicone Sealant
Dowsil 789 Silicone Weatherproofing Sealant
Product Description .
Acryrub Ps a high-quality, plasto-elastic onecomponent joint ro+ isealant based on acrylic dispersions.
Key Features:
Very easy to apply.
Colour fast and waterproof after curing.
Can be painted over after curing.
Very good adhesion on many porous surfaces and aluminium.
Easy tooling & finishing.
Non toxic & non flammable.
No mass-water clean up.
Paintable
Application:
Joints with movements up to 15%.
Connection joints in the building industry.
Joints between windowsills, between skirting-board and floor between brickwork etc.
Filling all gaps & cracks.
Perimeter sealing around doors and windows.
Modular kitchen sealing.
Cupboard sealing.
Shelf life And Storage: 12 months from date of manufacturing in unopened packaging stored in a cool and dry place at recommended temperatures between Protect against frost.
quality like mcoy , boss & fevisil ( pidilite)
Additional Information:
Item Code: 001
Production Capacity: 4 ton / day
Delivery Time: 3-4 days
Packaging Details: 1 box 24pcs master box 4 24 96pcs
Product DescriptionWe are a leading Suppliers GP Plus, BSealant, GP Silicone Sealant is a high-quality,elastical one-component joint sealant based onsilicones.Characteristics:- Very easy application- Permanent clear, UV-resistant- Stays elastic after curing- Very good adhesion on many materials- Typical acetic smell- General sealing for automotive applicationsApplications:Building- and construction jointsGlazing and connection jointselastic joints in coldstore and container applicationsSealings in air condition systemsGeneral sealing for automotive applications.
euroking weatherproofing silicone sealant 789 A one part, neutral cure, architectural grade sealant designed for general weathersealing. It easily extrudes in any weather an quickly cures at room temperature to produce a durable, flexible silcone rubber seal.
High Tempreture Silionce Sealant
Formulated In The USA
Manufactured In The Sultanate Of Oman
Take Above 280 Celcious Tempreture
GROSS WEIGHT 330GMS
Gasket Maker
CVD Diamond has been recognized an ideal material for various applications because of its outstanding properties which includes extreme hardness and strength, high thermal conductivity, low thermal expansion, excellent dielectric properties, resistance to chemical attack, and optical transmission over a wide spectral range. It can be widely used in complex tooling and machining processes, thermal-management applications, semiconductor industry and microwave engineering.
Microwave-Transparent Windows and Optics
We supply high-quality diamond optical products that are transparent in the microwave region with a wide range of size and thickness. With our cutting-edge laser technologies, we can customize the optical windows in any shape and dimension according to clients requirement.
Specifications:
Diameter of 65mm (F150mm on request)
Double side surface roughness: Ra 10nm
Flatness: 4um/cm
With higher transparency
Thickness less than 0.5mm
Can be laser cut to any size and shapes
4215 Non Metallic Elements Suppliers
Short on time? Let Non Metallic Elements sellers contact you.
