Product Details :
Network Cable is designed for optimal support of High-Speed data protocols for support frequencies of up to 700 MHz And Cat7 can support up to 100 meters when transmitting 10Gbps.VTech Network Cable is designed to be quick and easy to install the cable requires no specialist installation tools, The Low smoke cable is supplied in box packaging for fast, snag free installation. This VTech cable is numbered from 305 meter to 1 meter to allow quick and easy calculation of the cable remaining in the box and reduce cable wastage. The network cable has a polyethylene cross filler to ensure optimum cross talk performance.
Solid Bare Copper Cable, 4 pairs covered with foil, category 7, solid. Twisted pairs with FRLS PVC
FRLS PVC insulation has better fire retardant properties than normal PVC
Cable Type : Twisted Pair
Patch Panel Type : Cat 7 / Cat 7a
Color : Red, Grey, Blue, Yellow, Green
Cable length : 305 meter
Product Features:
High-Performance Data Cable
650MHz Bandwidth for Data Applications
Category 7 Shielded Twisted Pair
Easily Identified Color-Striped Pairs
23AWG Solid Bare Copper 0.56mm Conductors
Exceeds TIA/EIA-568B.2-1, ISO/IEC 11801
305mtr (1000ft) in Box / Roll / Drum
Specifications
Meets ANSI/EIA/TIA 568, IEC 61156-5 requirements
Applications
Cable is used for indoor applications. Fixed installations, high bandwidth digital applications with low BER and high data rates.
Materials:
Conductive material: Wire made of Solid Bare Copper
Conductor insulation: PVC
Each pair with Aluminum Foil + All pair also with Aluminum Foil
Alloy Bedding + Nylon Cord
Outer jacket is Flame Retardant, Low Smoke Low Halogen (FRLS) PVC
Product Details :
Network Cable is designed for optimal support of High-Speed data protocols for support frequencies of up to 700 MHz And Cat7 can support up to 100 meters when transmitting 10Gbps.VTech Network Cable is designed to be quick and easy to install the cable requires no specialist installation tools, The Low smoke cable is supplied in box packaging for fast, snag free installation. This VTech cable is numbered from 305 meter to 1 meter to allow quick and easy calculation of the cable remaining in the box and reduce cable wastage. The network cable has a polyethylene cross filler to ensure optimum cross talk performance.
Solid Bare Copper Cable, 4 pairs covered with foil, category 7, solid. Twisted pairs with FRLS PVC
FRLS PVC insulation has better fire retardant properties than normal PVC
Cable Type : Twisted Pair
Patch Panel Type : Cat 7 / Cat 7a
Color : Red, Grey, Blue, Yellow, Green
Cable length : 305 meter
Product Features:
High-Performance Data Cable
650MHz Bandwidth for Data application
Category 7 Shielded Twisted Pair
Easily Identified Color-Striped Pairs
23AWG Solid Bare Copper 0.56mm Conductors
Exceeds TIA/EIA-568B.2-1, ISO/IEC 11801
305mtr (1000ft) in Box / Roll / Drum
Specifications
Meets ANSI/EIA/TIA 568, IEC 61156-5 requirements
Applications
Cable is used for indoor and outdoor applications. Fixed installations, high bandwidth digital applications with low BER and high data rates.
Materials:
Conductive material: Wire made of Solid Bare Copper
Conductor insulation: PVC
Each pair cover with Aluminum Foil
Nylon Cord
Outer jacket is Flame Retardant, Low Smoke Low Halogen (FRLS) PVC
The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application.
The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market.
It is designed for applications that need low latency, medium throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, telematics, asset tracking, remote monitoring ,E-health , mobile pos terminals and sharing bike.
General features
- Tri-Band FDD-LTE B3/B8/B20
- GPRS/EDGE 900/1800Mhz
- Output power
- GSM900: 2W
- DCS1800: 1W
- Control Via AT Commands
- Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V
- Operation temperature: -40 to +85
- Dimensions: 24 X 24 X 2.6mm
- Weight: 3.0g
- GNSS (GPS,GLONASS and BeiDou/Compass, Galileo, QZSS)
Specifications for Data transfer
- LTE CAT-M1(eMTC)
- Uplink up to 375kbps, Downlink up to 300kbps
- NB-IoT
- Uplink up to 66kbps, Downlink up to 34kbps
- EDGE Class
- Uplink up to 236.8Kbps, Downlink up to 236.8Kbps
- GPRS
- Uplink up to 85.6Kbps, Downlink up to 85.6Kbps
Other features
- USB Driver for Microsoft Windows XP/Vista/7/8
- USB Driver for Windows CE/Mobile
- USB Driver for Linux/Android
- Firmware update via USB
- TCP/IP
- PPP
- SMS
- EMAIL
- FTP/HTTP/SSL
- VoLTE*
- FOTA*
Wavetel 5G WiFi 6 CPE WNR3410 supports 5G NR(NSA&SA), LTE and WCDMA
networks and is designed to deliver high-speed and low-latency wireless access to
the residential and small businesses. WNR3410 has three 1GE LAN ports and one 1GE
LAN/WAN port, and it supports WiFi6. Moreover, WNR3410 is also able to provide
VoIP service to fully meet the needs of end users.
Wavetel 5G WiFi 6 CPE WNR3310 supports 5G NR(NSA&SA), LTE and WCDMA
networks and is designed to deliver high-speed and low-latency wireless access to
the residential and small businesses. WNR3310 has two 1G Ethernet ports and one
2.5G Ethernet port, and it supports WiFi6. Moreover, WNR3310 is also able to
provide Voice service(VoLTE/CSFB/VoIP) to fully meet the needs of end users.
2716 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
FEATURES
Compliant with IEEE802.3bt
90W output power on 4-pairs
Data Rate: 10/100/1000Mbps
Full protection for OCP, OLP, and OVP
LED indication for power and POE status
2-Pair PDs received power on 2-Pairs
Automatic Detection and Protection of Non standard Ethernet Terminals
WTG100 series digital/media trunk gateway are compact, dedicated and feature-rich VoIP to E1 PRI gateway. Intelligently packaged in a stackable 1U chassis, it is designed to interface between TDM & IP networks in enterprises or small-scale carrier locations for cost-effective communication. The models of the Digital Trunk Gateways are WTG100-1, WTG100-2, WTG100-4, WTG100-8. They provide 1/2/4/8 lines of E1 ports respectively. For an Voice over IP based system it provides E1 PRI trunking. WTG100 Series E1 trunk gateway series is a collection of experiences and know-how accumulated in the enterprise and service provider markets, provides excellent services that meet the needs of customers that ask for high quality VoIP services. Also, this product provides better PRI gateway services due to the unique QoS algorithm by ensuring Quality of Service (QoS) for SIP, MGCP VoIP call control protocols, and better calling quality.
� (Please contact us for more frequency bands combinations)
Management
WEB, Telnet, SSH
SNMP, TR069
Environmental
Dimension: 200mm*135mm*35mm
Structure design: High-duty metal case
Power consumption: 24W
Input: DC12V/2A
Operating temperature: -30+75C
Operating humidity: 10 95%RH
Store temperature: -40 +85 C
Installation:
GLsun's DWDM-SFP25G-10-C17-T02 single-mode transceiver is SFP28 25G DWDM 10KM transceiver for duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I C. It has built-in clock and data recovery (CDR). This module is designed for single-mode fiber.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gb/s Wavelength 1563.86nm~1528.77nm
Max Cable Distance 10km Connector Duplex LC
Transmitter Type 1563.86nm EML Extinction Ratio 3.5dB
Media SMF Power Consumption
GLSUN SFP-25G-CWDM-1270-10-T02, CWDM 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km.
The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gb/s Wavelength 1270nm~1370nm
Max Cable Distance 10km Connector Duplex LC
Transmitter Type DFB CWDM Extinction Ratio 3.5dB
Media SMF Power Consumption
Glsun SFP28-25G-BX10U DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gbps Wavelength TX1270nm/RX1330nm
Max Cable Distance 10km Connector Simplex LC
Transmitter Type DFB BiDi Extinction Ratio 3.5dB
Media SMF Power Consumption
Glsun SFP28-25G-BX10D DFB 25.78Gbps SFP28 BiDi transceiver module is designed for use in 25Gb/s data rate over single-mode fiber for link length 10Km. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gbps Wavelength TX1330nm/RX1270nm
Max Cable Distance 10Km Connector Simplex LC
Transmitter Type DFB BiDi Extinction Ratio 3.5dB
Media SMF Power Consumption
GLsun SFP28-25G-LR single-mode transceiver is SFP28 transceiver module duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20 pins connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. It has built-in clock data recovery (CDR). This module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gbps Wavelength 1310nm
Max Cable Distance 10km on 9/125um SMF Connector Duplex LC
Transmitter Type DFB 1310nm Extinction Ratio 3.5dB
Media SMF Power Consumption
GLsun SFP28-25G-SR 850 nm VCSEL 25.78Gbps SFP28 transceiver is designed for use in 25Gb/s data rate over multi-mode fiber for link length of 100m. These transceiver designs are optimized for high performance and cost-effective to supply customers with the best solutions for 25Gb/s single lane optical links.
Compatible Cisco Form Factor SFP28
Max Data Rate 25.78Gbps Wavelength 850nm
Max Cable Distance 70m on OM3 or 100m on OM4 Connector Duplex LC
Transmitter Type 850nm VCSEL Extinction Ratio 2dB
Media MMF Power Consumption
GLSUN's QSFP-40G-ER4-T02 is a Optical Transceiver designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
Compatible Cisco Form Factor QSFP+
Max Data Rate 44.6Gbps Wavelength 1310nm
Max Cable Distance 40km Connector Duplex LC
Transmitter Type DFB CWDM Extinction Ratio 5.5dB
Media SMF Power Consumption
GLsun 40Gb/s QSFP+ PSM 10km Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel. and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single-mode fiber. These modules are designed to operate over single-mode fiber systems using 1310 nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver that provides increased port density and total system cost savings.
Compatible Cisco Form Factor QSFP+
Max Data Rate 11.2Gbps Wavelength 1310nm
Max Cable Distance 10km at Single Mode Fiber Connector Single MPO
Transmitter Type DFB Laser Array Extinction Ratio 3.5dB
Media SMF Power Consumption
Cisco QSFP-40G-LR4 Optical Transceiver are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP+ MSA, and IEEE 802.3ba 40GBASE- LR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA.
Compatible Cisco Form Factor QSFP+
Max Data Rate 11.3Gbps data rate per wavelength Wavelength 1310nm
Max Cable Distance 10km link length Connector Duplex LC
Transmitter Type DFB CWDM Extinction Ratio 3.5dB
Media SMF Power Consumption
GLsun QSFP-40G-SR4 Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for 40-gigabit ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. One version is each lane can operate at 10.5 Gbps up to 100m using OM3 or 300m using OM4 multimode fiber, another version is each lane can operate at 10.5Gbps up to 300m using OM3 or 400m using OM4 multimode fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Compatible Cisco Form Factor QSFP+
Max Data Rate 10.5Gbps Wavelength 850nm
Max Cable Distance 150m on OM4 MMF Connector MTP/MPO
Transmitter Type VCSEL 850nm Extinction Ratio 4dB
Media MMF Power Consumption < 1.5W
Power Supply Voltage 3.3V Operating Case Temperature 0C to +70C (Commercial)
2716 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
