1.Product description
The microducts which with ribbed and low friction inner surface are made up of hdpe
(high density polyethylene). It can be used single or as the primary tube of the microduct bundle. The
Microducts are suitable for fibre blowing and direct buried and installed applications.
2.Features and benefits
A.Material: hdpe, high density polyethylene
B.Tube type 6-14mm
C.Low friction internal coating
D.With ribbed inner surface
3.Parameters
Permissible tolerance (mm)
¡¡¡ì¡¨¨0.1
Tensile strength at yield (mpa)
Hdpe microduct ¡y18
Lszh microduct ¡y8
Elongation at break [%]
¡y350
Minimum bending radius (mm)
20¡¡¡ì¡¨¦d
Ring stiffness (kn/sq.M)
Sn4 : ¡y 4
Sn6.3 : ¡y 6.3
Sn8 : ¡y 8
Sn12.5: ¡y 12.5
Sn16 : ¡y16
Normal operating pressure (bar)
12
Storage temperature (¡ãc)
-20¡ãc ~ +60¡ãc
4.The main type of the products
8/6 mm
10/8 mm
12/10 mm
14/12 mm
Panel Board Accessories are under Brass Electrical and Wiring Accessories category products, We are manufacturing and exporting all kinds of Panel Board Accessories as per customer's specifications and requirement.
We manufacture and export Panel Board Accessories like Free cutting Brass 319 type BS 249 type.
If you need special size and configuration or if you would like to place an order for Panel Board Accessories or Brass Electrical and Wiring Accessories products with plating please Contact Us
This is suitable for mounting on the gripper's tip end to handle irregular objects
such as food, rubber, and plastic injection-molded product without causing damage.
Applicable to VR, haptic devices, and medical fields as well.
This is suitable for mounting on the gripper's tip end to handle irregular objects
such as food, rubber, and plastic injection-molded product without causing damage.
Applicable to VR, haptic devices, and medical fields as well.
This is a essential Sensor set on the wrists of cobot. It makes the robot enable tool collision, tool weight compensation, force control, direct teaching tool, and object weight measurement with checking any power on senor.
The 6-axis F/T Sensor KIT, featuring AIDIN ROBOTICS' advanced force-sensing technology, is now optimized for Rainbow Robotics & Neuromeka cobot series. It overcomes the limitations of capacitance measurement and offers functions like force control and collision detection. This kit improves manufacturing efficiency and ensures safe human-robot collaboration.
The 6-axis F/T Sensor KIT, featuring AIDIN ROBOTICS' advanced force-sensing technology, is now optimized for Rainbow Robotics & Neuromeka cobot series. It overcomes the limitations of capacitance measurement and offers functions like force control and collision detection. This kit improves manufacturing efficiency and ensures safe human-robot collaboration.
Ultra-thin Joint Torque Sensor accurately and sensitively measures torque applied to robot joints,
enabling precise collision detection and torque control in a compact design.
This Ultra-thin joint torque sensor is designed to selectively measure rotational torque along a single axis by distinguishing and extracting it from external forces consisting of 3-axis forces and 3-axis moments.
It is primarily used in specialized situations where only torque needs to be extracted or in motors that generate torque.
Ultra-thin Joint Torque Sensor accurately and sensitively measures torque applied to robot joints,
enabling precise collision detection and torque control in a compact design.
This Ultra-thin joint torque sensor is designed to selectively measure rotational torque along a single axis by distinguishing and extracting it from external forces consisting of 3-axis forces and 3-axis moments.
It is primarily used in specialized situations where only torque needs to be extracted or in motors that generate torque.
Ultra-thin Joint Torque Sensor accurately and sensitively measures torque applied to robot joints,
enabling precise collision detection and torque control in a compact design.
This Ultra-thin joint torque sensor is designed to selectively measure rotational torque along a single axis by distinguishing and extracting it from external forces consisting of 3-axis forces and 3-axis moments.
It is primarily used in specialized situations where only torque needs to be extracted or in motors that generate torque.
This is a essential Sensor set on the wrists of cobot. It makes the robot enable tool collision, tool weight compensation, force control, direct teaching tool, and object weight measurement with checking any power on senor.
The 6-axis F/T Sensor KIT, featuring AIDIN ROBOTICS' advanced force-sensing technology, is now optimized for Rainbow Robotics & Neuromeka cobot series. It overcomes the limitations of capacitance measurement and offers functions like force control and collision detection. This kit improves manufacturing efficiency and ensures safe human-robot collaboration.
Just like iBeacon is a Bluetooth 4.0 communication protocol designed by Apple, Eddystone is an open Bluetooth 4.0 protocol from Google.
Eddystone is a protocol specification that defines a Bluetooth low energy (BLE) message format for proximity beacon messages. It describes several different frame types that may be used individually or in combinations to create beacons that can be used for a variety of applications.
Specification of PC063
Model No.: PC063 Beacon
Bluetooth Version: Bluetooth 4.0
Chip: TICC2541/TICC2640
Working Distance: 0-120m
Certification: MFI
Size: 37.6*37.6*14.9mm
Powered by CR2477 coin battery with battery life 24-36 months
Eddystone Beacon Instruction
Download App from Google Play, the App name is Eddystone, logo as following:
Turn on the Beacon: Long press the button until the green light flash.
Turn off the Beacon: Long press the button until the red light flash.
How to Change the Beacon Mode
Compatiable with iBeacon and Eddystone, that is to say, it has different modes:
---iBeacon mode
---Eddystone-UID mode
---Eddystone-URL mode
Beacon mode can be changed by click button.
The default Beacon mode is iBeacon;
Click the button two times, the green light will flash one time, then device change to Eddystone -UID Mode;
Click the button two times, the green light will flash two times, then device change to Eddystone -URL Mode;
Click the button two times, the green light will flash three times, then device change to iBeacon Mode.
How to Change the Parameter
---Long press the power button to turn on Beacon, then Beacon will enter modifiable mode. User can modify parameters in 2 minutes, after 2 minutes, Beacon will turn to broadcasting mode.
---Default Password is â??123456â?�, can be modified in App. If password changed, please remember for next modify.
---Support Minimum 100ms broadcast interval (broadcast interval is from 100ms to 9000ms)
Customized Service
Print your logo on the Beacon case;
Program your own firmware into our iBeacon;
Pre-configure the value of parameter before shipping;
PCB can be customized if needed;
Package can be customized if required.
