Jacobs 29 butly Mastic seal Tape is composed of Conforrtable, duable, tacky mastic with an easy - tear release liner, Which is designed for quick and easy insulating, padding and sealing of objects that need to be protected from adverse conditions. used with pvc tape it is suitable of cable =s, buried cables and pipes.
Product Feature
Highly comfortable to any irregular surface and object
Wide temperature Stability while maintaning its sealing properties
Good adhesion and sealing characteristics to metals syntheic cable insulation and jackets
Excellent weather resisant, waterproof, sealing properties
Application Range
Sealing ducts and cable end seals
Sealing high voltage cable spice and termination accessories
Padding irregular shaped connections
Used for filling and sealing installation holes of air conditioning or other equipments
Specification
38.1 mm (W) X 1.524 m (L) X 3.175 mm (T)
Universally applicable, low-foaming padding auxiliary for continuous and semi-continuous dyeing processes; wetting and deaerating agent for dyeing from long liquors; for dyeing cellulosic fibres and their blends.
PCE superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.
Polycarboxylate Superplasticzier we produce types as below:
1. High water reducing type
(normally they can be satisfied for concretes' requirements):
JH03 basic standard type(under most exported.)
JH09 viscosity adjustment is better than JH03,water reducing ratio is lower than JH03,(suitable for high clay content ratio of cement,under most exported.)
JH15 water reducing ratio is higher than JH03,performance is better than JH03,suitable for high strength concrete.(New Research and technology higher than JH03.)
2. Water reducing and slump retention type
JH02 water reducing and slump retention type.(New Research on base of JH03.)
3. High slump retention type
JH06 basic standard type,mix with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.)
JH06K higher slump retention performance than JH06,price is higher than JH06,mixing with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.)
JH16 Better performance and different technology with JH06 and JH06K,mixing with JH03,JH09 and JH15 if concrete's slump retention is not satisfied.(New Research and technology to satisfy JH15.)
Exporting loading: 20'GP container loading:
1. 220kg/drum, 80 drums
17.6 T
2. 1150kg/drum,20 drums
23 T
3. 20-25tons/flexitank.
20-25 T
Refractory mortar is a specially engineered mixture of sand, calcium aluminate,cement,and fire clay.It is used to lay fire brick in places that are exposed to extremely high temperature.
Refractory mortar produced from fine grained refractory aggregate, refractory powder, binder and other additives and used for building and bonding the refractory bricks, and also repairing of furnace lining, which is mainly used in glass furnaces, hot blast furnaces, coke ovens, soaking furnaces, heat exchange, boilers and other industrial kilns.
Characteristics of Mortar:
High temperature strength
High thermal stability
Good resistance to slag erosion
Good anti-stripping performance
Long service life.
Our air-set refractory mortar is ready-to-use for lining refractory bricks and insulation bricks. It contains refractory materials and binders to provide an excellent adhesiveness after drying in the room temperature, and excellent Bonding strength after 1200~1500 sintering.
It is highly suitable for bonding of insulation bricks and refractory bricks. It is used to seal and repair furnaces, combustion chambers, boilers, stoves, flues, stoves, ducts, chimneys, and many other furnaces and refractory applications.
Ready to use
Easy application
Refractory wet mortar
High Temperature Refractoriness
129055 Construction Materials Suppliers
Short on time? Let Construction Materials sellers contact you.
JANTA Group provides Refractory Boiler Bed Material (Refractory Grog) of Low Ferric High Temperature product, which is processed from selected super heat duty refractory aggregates of moderate alumina contents and of highly dense texture.
This very special Bed Material of Refractory Aggregates fired at a temperature of 1400 Centigrade has many special characteristics that make it a perfect material for obtaining smooth and perfect fluidization in Fluidized Bed Combustion boilers with high economy of operations.
Special Characteristics:
Exceptional Chemical Purity with Low Alkali and Low Iron Contents
Fully Screened Material with Accurately Controlled Particle Size Distribution
Free From Dust/ Fine & Over Sized Particles
Perfectly Controlled Particle Density and Bulk Density
Calcium silicate insulation board is produced from basic material calcium and silicon and provides excellent service in demanding fire-proof applications. Calcium silicate boards are widely used in pipes and thermal equipment, power station, petrochemical, foundry industrial as thermal insulation. It is also used as back-up lining for industrial furnaces..
Calcium Silicate Boards are designed to withstand high temperature as well as feature superior structural strength. Further, the use of hydrous calcium silicate makes these blocks suitable for use in systems operating up to 1200F. Available in the inorganic and noncombustible finish, this also meet physical and thermal property requirements as per defined standards as well as support corrosion resistance to outside surfaces of pipe and equipment.
Also suitable for use in fire endurance applications, these are available in finish forms of the preformed block and preformed pipe. These are suitable for use in industry sectors like chemical plants, refineries, steam electric power plants and others.
With prominent characteristics such as water absorption, fire resistance, sound insulation, and thermal insulation, the Fiber Cement Board DURAflex has proven itself to be highly suitable for the warmth, humidity, and heavy rainfall of Vietnam, and has therefore gradually become a popular construction material.
Key facts:
- Good water absorption
- Durability
- Bright, flat, and smooth surface
- Termite and pest resistance
Application
- Suitable for a wide range of applications such as grid or concealed ceilings, external partitions, underlays, underlay flooring, floor panels, and particularly
- Good for heavy use, wet areas such as bathrooms and kitchens
Gyp-Filler is a specialist powder product manufactured from gypsum and other active ingredients. The special formula provides good levels of adhesion to the plasterboard surface, high flexural strength and coexisting matching properties of the filler and plasterboard
Key facts
No cracking due to coexisting materials
Good adhesion on the plasterboard surface
High flexural strength
Suitable for all kinds of jointing tapes on the market
Application
In addition to Gyp-Filler as a jointing system for drywall and concealed ceiling systems,
Gyproc - Vinh Tuong suggests also using Vinh Tuong paper tape for optimal performance.
Acoustic Mineral Fiber Ceiling Board can be economically loaded with ceiling grids produce by Sinoceling.com into 1x40'HQ. it is made of wet-formed mineral fiber with low density: 220-260kg/m3, including square edge & tegular Edge finish.
Mineral fiber board has many features: Strong and lightweight finish; dimensional stable; High humidity resistance; So far, Mineral fiber ceiling tile is easy to be installed with our T24 ceiling tee grid by SINOCEILING, which has been widely applied for offices, schools, hospitals, theatres, music house, power stations and so on.
Thermoplastic Toe Puff & Counter Material
Also named as Nonwoven Hot Melt
Quality: SEXE#, SEXH#, SGHX#, SGHG#.
SEXE# & SEXH# can compare well with the ones offered by European manufacturer in excellent cost-performance.
Thickness: 0.60MM-2.50MM
Size: as per negotiation.
Max Width: 1.00M
Application: heat-bonding for shoesâ?? toe puff & counter, also to be used in the padding of cover & bags & boxes & cap tongue etc.
Public by J. Z. Industry & Trade Co., Ltd, a leading & professional manufacturer of shoes material
A product of Fusion, Fusion Wall Putty is a white cement-based putty. It bonds strongly with base surface and can be used both on dry and damp walls. Painters can apply Fusion Wall Putty to create a smooth and undulation-free surface on both interior and exterior walls to get that royal look. Use of Fusion Wall Putty can help in increasing the life of the wall by making it flake, abrasion, and water resistant.
Properties
Base: White cement, Quality polymers & specialty chemicals and fillers.
Pot Life : 2hrs.
Water Demand : 40 45%
Coverage : 25 + 3 sft/mm/kg
Thickness of layer : 2.0 mm (two coats).
Sodium naphthalene sulphonate formaldehyde produces concrete with extremely workable characteristics referred to as high slump. Pns also allows concrete to be produced with very low water/cement ratios at low or normal slumps.
Sodium naphthalene sulphonate formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation
Roof Reflective Insulation Material,Epe Foam Cover Aluminium Film
* Function:
Material with the features of dampproof, shockproofing, sound insulation, heat preservation, sun shade, heat isolation and good plasticity. It is an ideal substitute of traditional packing materials and used widely in the packing of electronic products, daily necessities, glass, cooler bag, potteries, electrical household appliance, spraying, furniture, hardware products and toys.
* Packing: OPP bag
* Payment: T/T
* Origin: China
* Min. Order: 5000 square meters
* Delivery time: 30day
Consmos-- Hot Sale Super MDI E0 Glue FULL Pine OSB
*Full pine materials, Big Flakes
*E0 MDI glue, Waterproof
*Produced by Big Auto Machine imported from Germany
*Size: 1220*2440mm
*Thickness: 9mm,11mm,12mm,15mm,18mm
A blend of white cement, polymers and minerals, JP Wall Putty protects and smoothen walls and is effective on all type of cementitious surface. It is pure white in color and has strong adhesive properties which ensure a strong between the
base and the paint making it an ideal surface for all interior and exterior walls.
High Standard Ready Mixed Dry Mortar Plastering Mortar
Main Features:
- Good adhesive strength with substrate and thermal insulation layer
- Good workability, stable strength, easy to control
- Low dry shrinkage rate ensure maximum dimensional stability of the wall
- Effectively eliminate seepage, leakage, crack, improve the wall anti-crack,anti-seepage and anti-strain capacity
Origin: Vietnam
Brand Name: AAP Mortar
Packing: Bag 50kg / Jumbo Bag.
