Fully automatic multi-function pad machine.
Concrete reinforced cushion block and automatic molding equipment professional manufacturers, according to market demand, under the concerned expert technical guidance, repeated testing and technical innovation, designed a set of efficient reinforced protective layer with cement mortar and concrete block block production equipment, compared with the past the old to make way, greatly improved the production efficiency, reduce the cost and output of the block has high strength, shape rules, the advantages of easy to use, replace the homemade cement mortar pad and plastic mold block of low strength, prevent the disadvantages such as poor permeability and the concrete structure is bad
Vibration frequency:2940 rolls/minute or 50-60 Hz
Vibrating force:100kN
Motors power:48kw
Volume of hoppers
Main material: 900L
Face material: 750L
Pallet size:1200Ã?870mm
Gross weight:9.0 T (without face mix device)12T (with face mix device)
Total power:39.85kw
Introduction of square concrete spacer machine:
This is an automatic cover block making machine production line. The whole line includes the host machine, conveyor belt, mixer, stacker.
1. Function
This machine can produce various different hollow blocks, solid blocks, pavers and curbstones by changing its mould.
2. Mould
The moulds adopt precise line cutting technology and carburizing treatment technology to assure longer mould life span and increase the block mould precision, so the brick moulds have better performance and longer service time.
3. Material
The raw materials of the blocks can be cement, concrete, crushed stone, sand, Fly ash, dust, cinder and other industrial wastes.
4. Molding technology
Hydraulic technology is adopted by this machine. And the pressure can reach up to 21MPa. So the blocks are strong and durable.
The fully automatic block machine is mainly used for the construction of the building, the road railway, the bridge and the ancient building, the reinforced concrete protective layer pad, the beam support, the reinforced layer spacing standard block support, etc.
Cement reinforced protective layer pad quality, directly related to the bearing capacity of steel bar in concrete engineering structure. The durability. Resistant to acid and alkali. The situation such as fire prevention, the construction quality plays an important role.
In building materials, the application of block machine is very extensive.
In the construction process, the cement block can be used as the protective layer of other items, especially the reinforcement, so the quality of the cement block must be reliable.
1. Stable running Use of advanced electronic control technology, stable and reliable hydraulic system, mature and reliable seismic pressure molding technology, the advanced hydraulic, mechanical and electrical integration, automatic control, full synchronization in a reliable way, pure vertical technology, unique compactness and strength of the product.
2. Unique storage device of unique storage device, which avoids the early liquefaction of concrete under the influence of residual vibration, so as to ensure uniform and uniform material of the product.
3. Unique forced feeding device unique forced feeding device, in particular the production of fly ash products, can ensure rapid and full of die each product in the feed, dense, for producing concrete porous brick, more play DongWei equipment unique characteristics.
4. Unique vibration mode with unique vibration mode can make the concrete fully liquefied in 2 to 3 seconds to ensure high density, high strength and high efficiency of production.
5. Raw material widely, the realization of large dosage of fly ash can be used as cement, sand, stone, fly ash, coal gangue, ceramsite, slag, steel slag, cinder and various kinds of industrial waste, building slag as raw materials, different raw materials using scientific and reasonable formula, can produce different quality requirements of products.
6. One-machine multi-purpose, to meet the market demand through the transformation mold, production standard bricks, porous bricks, various specifications bearing weight, non-load-bearing block, wet block and other wall materials;
Production chain transfer, planting grass brick, square brick, etc., to increase secondary cloth device can produce double color concrete brick, color pavement brick, grass brick, etc., block molding machine multi-function fully meet the market requirements.
7. How ability Rated DongWei block molding machine production line production capacity range from 50000 to 120000 cubic meters (standard block), can meet the production requirements of different users, to adapt to the situation of China automation configuration, customers can choose according to fund condition.
The brick press is widely used in the construction industry, and the brick press USES industrial waste residue: fly ash, coal gangue, slag, smelting slag and various tail slag as the main raw material.
With advanced technology, reasonable design, stable performance, reliable technology, high pressure, stable operation and high production efficiency.
So what are the characteristics of a brick press?
So let's see.
1. The pressure is large, and the nominal pressure can reach 1600KN;
2. The transmission part is completely sealed, the piston is multi-dustproof, the pressure oil supply, the circulation lubrication, reduce the wear, prolong the machine life;
3. It has the functions of pressure display, overload, automatic stop of oil shortage, mechanical failure alarm, etc.
4. Adopt the car cross universal joint to turn the mechanism, rotate more flexible, stable and durable;
5. High speed flywheel energy storage, power consumption and high output;
6. The main compression parts are made of high quality steel with special processing, which can meet the maximum working pressure strength.
Through the above introduction, we found that the brick molding machine has many excellent characteristics, it is also welcomed by the masses of users, our company is specialized in brick molding machine production and sales, interested friends are welcome to inquire.
Product Introduction:
Foamed concrete and foam concrete, it is by process of foaming machine system will be fully foaming in mechanical way, foaming agent and foam slurry mixing with water, and then after a foaming machine of conveying system for cast-in-situ construction or molding, formed by the natural curing a new lightweight thermal insulation material contains a lot of closed porosity.
It belongs to the air bubble insulation material, which is characterized by the formation of closed foam holes in the concrete, which makes the concrete light and thermal insulation.
Application:
1.Cellar, basement and arch filling
2.Sewers and Drains filling
3.Horizontal floor heightening
4.Water tank and fuel tank building
5.Platform filling and mending
6.Garden and rockeries
7.Foam concrete block
8.Foamed concrete precasting ,hollow wallboard casting
When using Fibre concrete block spacers machine to produce concrete cover block, many people will pay attention to the proportion of raw material, actually this kind of practice is correct, the raw material of scientific mix proportion is the foundation that produces high grade concrete cover block, actually the factor that affects concrete cover block quality has a lot of, besides the proportion of raw material still is concerned with adding water.
If the mixing ratio of raw water in the production of Fibre concrete block spacers machine is more than that of water, the raw material will be bonded in the mould of Fibre concrete block spacers machine and cannot be removed from the mould. If water is added less, the raw material will not be formed.
Fully automatic hydraulic cover block machine with mixer, hopper and elevator
The machine brings less pollution, especially less noise. It can also save energy. No necessary pallet, the cover blocks can be stacking directly.
With changing moulds, it can not only produce various kinds of spacers .
Hydraulic machinery is very popular because of the enormous amount of power that can be transferred through small tubes and flexible hoses, and the wide variety of equipment that makes use of this technology.
High-intelligent automatic concrete spacer machine, Easy to produce and manage, is not affected by workers' ideological emotions, works continuously, reduces investment in production management, increases production, effectively reduces cement block cost, and win strong market competitiveness.
Cement block machine equipment mainly produces a variety of different concrete block, steel support, it is mainly used for building cast-in-situ, roads and railways, Bridges and buildings, reinforced concrete protective layer block, beam support, reinforced layer spacing standard block support, etc.
The quality of concrete reinforcement bars is directly related to the bearing capacity, durability, acid and alkali resistance and fire resistance of the reinforced concrete structures.
The pad block of cement block has high compressive strength, high durability and high precision.
The block machine produced by the machine factory in anyang qing dynasty can make the pad have more performance.
The strength of the block is made by the special formula through long-term test. Its compression strength reaches 70MPA, and its practicability is much higher than that of other materials.
Block durable high materials used in the same as the concrete performance, strong adhesion, consistent expansion coefficient, and even steam curing does not produce clearance, can merge with concrete as a whole, to prevent air, rain, water and other causes of reinforcement corrosion and concrete falls off, no mortar and the plastic pad of sorrows, greatly improving the security of the durability of the reinforced concrete.
The high precision and high strength concrete block of the cushion block is accurate and has a protective layer of high steel seal, which is completely different from the randomness of the mortar pad.
There is no "patch" in the shape of the pad and the template, which is suitable for the concrete structure.
The total alkalinity of the pad is low in environmental protection materials and the total alkalinity is low.
The brick machine adopting with multi-valves in series, electricity discharging unit and compressing and vibrating organic combing unit to materialize the highest moulding and density of the finished products. Auto pallets conveying, pallets feeding and compulsive materials arranging have highly raised up the production efficiency and reduced the working intensity, while simple pallet conveying and feeding units can be installed for production.
Reinforced concrete spacer machine adopts hydraulic transmission, integrated hydraulic system, electrical control and realizes a high degree of automation, low noise, long service life, convenient operation, etc. Reinforced concrete spacer machine mainly produces circular perforated or stirrup perforated cover blocks. It can stack directly after molding, which saves plate greatly.
Static cement block machine.
Main production of various cement block, plastic block, iron block.
It is mainly used for building, road, railway, bridge and ancient buildings, reinforced concrete cover block, beam support, reinforced layer spacing standard block support, etc.
The quality of concrete reinforcement bars is directly related to the bearing capacity, durability, acid and alkali resistance and fire resistance of the reinforced concrete structures.
Main technical parameters
Dimension of host machine2060*1730*2580mm
Host machine power13.45KW
Mould period24s
Vibration force35.5KN
The size of the pallet850*550*30mm
Weight of host machine3.0T
Workshop60m2
Introduction:
1. The foaming system adopts digital control technology, and the density of the finished foaming cement is easier to adjust.
2. Electric box is equipped with remote control handle, all functions can be operated remotely.
3. Select high-quality components and accessories, with reliable quality and guaranteed after-sales service.
4. Double cylinder full hydraulic push mechanism is adopted to pump water mud with high outlet pressure.
5. Equipped with walking wheel and universal wheel, convenient and flexible movement and positioning.
3872 Building Construction Machineries And Equipments Suppliers
Short on time? Let Building Construction Machineries And Equipments sellers contact you.
