Concrete cover block moulds have high production precision, great difficulty and long production cycle. The key points of comprehensive consideration should be taken into account before customers purchase the moulds. From the point of installation and use, users should review various molds according to the drawings provided by customers.
Introduction of steel reinforcement concrete spacer machine:
Full automatic cover blocks ,Thesteel reinforcement concrete spacer machine is the most advanced and ideal production equipment in the industry, This equipment design is reasonable, the automation degree is high, the occupation area is small, the production efficiency is high.
Performance characteristics of automatic non-firing brick machine:
1. The four-bar guide mode is adopted for mold operation, and the ultra-long copper sleeve ensures the precise movement of pressure head and mold box; Adopt a balance system consisting of rack, gear and balance shaft to ensure the balance and coordination of head and die box. The walking mode of the double-bar jib improves the running speed of the cloth machine, and the rotary convection compulsory mode shortens the cloth time and ensures the compactness of the product.
2. The mould adopts various heat treatment processes, such as quenching, tempering, carburizing and boronizing, which greatly enhances the wear resistance of the mould and improves the service life of the mould.
3 high dynamic proportional valve, hydraulic system, automatically adjust the flow in the process of reproduction, applying a cylinder, the cylinder and the endpoint buffer effect, so as to improve the stability, prolong the service life of the oil cylinder, improves the speed and flexibility of each part.
4. Vibration system:the vibrator assembly adopts oil-immersed type, which increases the load of high-speed operation and makes the concrete fully liquefied and exhaust at an instant.Bearing life has more than doubled.Its effect fully reflects: the vibrator assembly synchronization, soft start function, improve product density, more electricity.
3872 Building Construction Machineries And Equipments Suppliers
Short on time? Let Building Construction Machineries And Equipments sellers contact you.
Fully automatic block machine is fixed, platform vibration type, mechanical deform, the machine design is advanced and reasonable, the application range is wide, adopt the reducer, the brake think magnet curved arm around the mold.
The machine adopts 4 upright posts, accurate positioning, stable mould balance, high density of brickwork, small rough edges and good appearance.
Fully automatic block machine automation is very high, do not artificially add material, labor intensity is also very low.
Vertical vibration of table, pressure head vibration, good forming effect.
Using the assembly type mold box, the wearing parts can be replaced, the mold maintenance cost is less.
Unique broken arch device, suitable for wide range of materials.
Product Introduction:
The foaming machine consists of a pumping system, a foaming system, a stirring system, a rack and an electrical control cabinet.
(1) the pumping system consists of a extrusion pump. With no mechanical seal, strong self - suction, self - cleaning and other characteristics, and simple structure, easy to maintain. Its unique non-mechanical seal structure, so that it will not produce all mechanical seal pump leakage;
(2) the foaming system adopts the standard modular structure, which consists of variable frequency motor, air compressor, water pump, foaming agent gear pump and foaming device assembly.
(3) the stirring system consists of a mixing motor, a mixing cylinder body, a agitator, a driving system and a lubricating system.
(4) the electrical control system consists of frequency converter, ac contactor, air switch and intermediate relay.
Brick - free brick machine is a kind of name in the production equipment of brick machine.
It refers to the process of producing bricks, which is different from the traditional kiln brick. The machine is formed by the hydraulic press and does not need to be fired.
The fire - free brick machine combines the current domestic and foreign similar characteristics and the market needs to design and manufacture the new brick equipment.
The fire free brick machine has the characteristics of compact structure, large pressing force, strong rigidity, full sealing and dustproof, circulation lubrication, simple operation, high yield and durability.
The machine is equipped with the most advanced technology, such as high speed, stable operation, accurate positioning and low maintenance rate.
The fire free brick machine has the characteristics of compact structure, large pressing force, strong rigidity, full sealing and dustproof, circulation lubrication, simple operation, high yield and durability.
The machine is equipped with the most advanced technology, such as high speed, stable operation, accurate positioning and low maintenance rate.
Baking-free brick machine is mainly used to suppress the fly ash, river sand, the sand, sand, mineral powder, slag, stone powder, coal cinder, coal gangue, slag, chemical residue, etc as main raw materials of baking-free brick, pipe sand brick, refractory bricks and hollow bricks, porous brick, colored pavement production, is the country vigorously mediated environment-friendly building materials equipment.
Cement foaming machine construction, must be timely maintenance, only do a good job in the maintenance of the machine can prolong the service life of the machine, also can timely found damaged parts, machine repair.
Many people do not know how to maintain after the construction, the following is introduced by the high pressure foaming machine factory.
If no pumping operation is carried out in two days, the pipe should be removed step by step, and then water will be rinsed with the inside and outside of the pipe, clamp and sealing ring.
Check all fittings thoroughly once, and keep them properly according to the specifications and the degree of integrity.
Flush the mixing bowl, ball valve box, cylinder, mixer and pump outside;
Of course, we want to cement foaming machine play its important role, its quality must be high quality, recommend learn the related knowledge of cement foam machine more at ordinary times, to help us choose and buy high quality cement foaming machine.
Our company is mainly engaged in the production and sales of high pressure foaming machines, and we want to know more friends to pay more attention to our website.
Many use of cement foaming machine to make foaming of cement, the use of bad foaming agent and add cause foaming failure, or the effect is not good.
In fact, when using cement foaming machine to foam cement, it is necessary to pay attention to the problem, the following is the introduction of foaming machine equipment manufacturers.
1. The foaming speed should be appropriate, too fast too slow will affect the quality of concrete.
2. The generated hydrogen bubbles are small in diameter and evenly distributed.
In particular, the injection mould with full volume of water slurry needs to be distributed evenly, so as to ensure the quality of casting mold.
Knowledge introduced above are basically we use frequently encountered in the process of cement foam machine problem, hope the above introduction can help to you, at the same time hope that users know more about the relevant knowledge, let us work together to do this job.
In the later stage, we will update more relevant knowledge about the cement foaming machine. I hope you will pay more attention to it.
This equipment mainly produces various concrete spacer, special-shaped concrete spacer, Reinforced protective cushion block and so on, which are mainly used for cast-in-place buildings, highway, railway, bridge and ancient buildings, reinforced concrete protective layer spacer, beam support, reinforcing bar spacing standard pad support and so on.
The mold of cover block machine adopts professional manganese steel plate line cutting technology, which can effectively control the thickness of the cover block.
Fibre Cement Rebar Spacers machine in the molding process hydraulic cylinder output different strength, cement product appearance size is different.
Therefore, the pressure output of the Fibre Cement Rebar Spacers machine needs to be adjusted.
Pressure adjustment method of Fibre Cement Rebar Spacers machine, pump station adjustment 1. No-load operation for 10-20min. When starting the hydraulic pump of the block machine, loosen the overflow valve or be in the unloading position, so that the system can operate without pressure.
To check whether the mechanical parts are loose;
Lubricating oil should be lubricated to reduce mechanical friction and prolong service life.
When the power is switched on, trigger the switch handle according to the rising position on the switch, and the head will be hung;
Overlap the mold box with the pressure head several times, check if it is convenient.
Step on the brake and drop the box onto the wooden pallet;
Push the head back, start adding the material, add it to the top of the mould box a little, start the vibration for about 5-8 seconds, and then scrape the excess material to the mold box level.
Type:Block Making Machine
Brick Raw Material:Concrete/Cement/Sand/Fly Ash/Limestone/Stone
Processing:Brick Production Line
Method:Hydraulic Pressure
Automatic:Yes
Capacity:45000-47000 pcs/8h
Voltage:380V
Power:19.55KW
Dimension(L*W*H):350X220X200cm
Block machine equipment is the main production of various cement blocks, plastic block, iron block.
The concrete block machine is a special equipment for producing cement blocks.
It is mainly used for building, road, railway, bridge and ancient buildings, reinforced concrete cover block, beam support, reinforced layer spacing standard block support, etc.
Cement reinforced protective layer pad quality, directly related to the bearing capacity of steel bar in concrete engineering structure. The durability. Resistant to acid and alkali. The situation such as fire prevention, the construction quality plays an important role.
Description
Small concrete block making machine is specialized in producing various types of concrete pad of various specifications, including wheel pad and bridge pad, and can produce over 600,000 pieces of concrete (15mm-20mm type) every 8 hours. (30mm-50mm type) can produce 350 thousand pads every 8 hours every day. The size of the pad is different and the output is different. The machine is high in output and easy to operate. 4-5 people can produce it.
Application
Concrete cement brick machinery can produce minitype hollow block which is widely used in construction. This machine mainly produces circular with hole, stirrup with hole cement gasket. The pallet size of 500*300 can be directly stacked after forming. Save the tray.
Qz-30 concrete paving block making machine can produce sizes of blocks, bricks, colored pavers, curbstone and hourdis blocks. We also can produce moulds according photos and sizes of your blocks.
