NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, a screw nut clamping mechanism with quick opening function, fast clamping, accurate positioning, fast drilling, simple operation and safety use.
NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The rail grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The frog and switch grinding machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency.
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburettor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
YD-22 Hydraulic tamping machine is a new generation product developed by our factory, which is based on the experience of domestic and foreign customers in the use of tamping machines and adopts new materials and technologies. The basic structure and principle still retain the advantages of old tamping machine, that is, double guide column frame and single cylinder lifting mode. At the same time, by increasing the depth of the tamping pick and adding the stroke limit device of guide pillar etc. to make the machine not only work on type and type concrete sleeper lines in China, but also can work on various concrete sleepers and steel sleeper lines abroad. The machine is manufactured with a standard gauge of 1435mm and a single side off-track frame, and its main technical performance is better than the old type. The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation.
NGM-6.0 Internal combustion rail grinding machine, Its suitable for grinding rail welding seam, uneven joint, rail side fat edge,
rail surface repair welding of rail 43kg/m-75kg/m. Its grinding quality is good and its easy and simple to handle, and convenient
to be up on and down from the rail. Its an indispensable tool for railway engineering heavy repair, maintenance and first aid
repair.
ND-1 portable rail tamper is a special machine for ballast tamping on railway lines and turnouts. Choose high-vibration, high-power
gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact
the ballast. The impact force is large and the tamping effect is good. The whole machine is small in size, light. in. weight, and
convenient. to go up and down, which can effectively guarantee driving safety during operation.
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Place of Origin Hubei, China
Type Rail Cutting Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 670*600*510mm
Brand Name Linkage
Internal combustion engine HONDA GX200
Engine Power 4.8kW
Engine Speed 3600r / min
Thin grinding wheel (spindle) Spindle speed 3030r / min
Specification (linear velocity) 400 * 32 * 4 (70m /s)
Cutting time 60kg / m rail, 120S
Number of usage 50kg /m rail, use 4 times
Number of usage 2 60kg /m rail, use 3 times
Machine weight 39.5kg
Place of Origin Hubei, China
Type Rail Cutting Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 800*560*500mm
Brand Name Linkage
Engine GX270 petrol engine 5.1KW
Specification of cutting disc 400*32 *4mm
Cutting disc no. of revolutions 3320 r/min
Linear speed of cutting disc 70m/s
Cutting accuracy Verticalityâ?¤0. 4mm, flatnessâ?¤0.3mm
Cutting time 2 min ( cut off 60kg/m rail)
Weight 50kg
Place of Origin Hubei, China
Type Rail Cutting Machine
Material Stainless Steel
Dimensions (L x W x H) (mm) 670*600*510mm
Brand Name Linkage
Internal combustion engine HONDA GX200
Engine Power 4.8kW
Engine Speed 3600r / min
Thin grinding wheel (spindle) Spindle speed 3030r / min
Specification (linear velocity) 400 * 32 * 4 (â?¥70m /s)
Cutting time 60kg / m rail, â?¤120S
Number of usage 50kg /m rail, use â?¥ 4 times
Number of usage 2 60kg /m rail, use â?¥ 3 times
Machine weight 39.5kg
Digital Rolling Track Gauge For Track Geometry Measurement
The portable rolling track gauge is designed for measuring the track gauge and super-elevation.The lightweight ,reliable and easy to use device offers unique measurement accuracy.
The software system support for storing and analyzing the measuring data. It can be used for track inspection and rail maintenace.
It is easy to carry, and night-time and tunnelwork, legible even in direct sunlight are supported which is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying .
Features
1. Large LED backlit display: especially suitable for day outside and dark night
2. Quick calibration operation: simple
measurement process
3. Large capacity battery:long standby time
4. Accurate measurement:keep long-term stability
5. Temperature
compensation :working temperature is -30~+55
6. Insulated design
7. Anti-electromagnetic interference
8. Waterproof:could use in rainy day
9. power saving function: no operation within 15 minutes, the system will automatically shut down.
Rail Opening Gauge
JG-KC01 Rail opening gauge is mainly used for measuring turnout opening and offset gauge. It can be used for electrical maintenance, overhaul, engineering survey and other related department line operation.The instrument has fast measuring speed and easy to use. It can be used in day or night.
YD-22 hydraulic Tamping Machine is a kind of professional machinery used for railway line ballast tamping maintenance except for turnouts. It can be operated with train inervail time, without closing sections. It is equipped with three power modes. They are petrol, diesel and electric
YD-22 hydraulic Tamping Machine is a kind of professional machinery used for railway line ballast tamping maintenance except for turnouts. It can be operated with train inervail time, without closing sections. It is equipped with three power modes. They are petrol, diesel and electric
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
NQG-5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. It's a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
Rail Straight Edge Gauge
This item is used to check track rail from any deflections before and after welding.
1.The ruler body is made of high-quality carbon steel or stainless steel, and the scoring adopts laser scoring technology.
2.The cutting line is made of laser cutting process
3.The Straightness Measurer railway ruler is used to measure the railway rail flatness and wear.
4.Material: carbon steel
