The vp series power amplifier offers clean, reliable power in a durable enclosure. If you need professional amplification performance, the vp series is perfect for delivering pure, consistent wattage night after night.
With six models power upto 1200 watts, the vp series is ideal for powering pa systems and dj rigs. To ensure seamless, reliable performance, the amp features variable-speed cooling fans for thermal stability, along with short-circuit, thermal, over current, thermal protection.
For connecting convenience, the vp series boasts xlr and speakon &banana binding post outputs. The unit also provides front panel indicators for signal, limit, protect and power, plus level controls for channels 1 and 2. Selectable modes for stereo and mono bridge give you even more flexibility.
Selectable output power range to drive professional loudspeakers without clipping
Variable-speed cooling fan for thermal stability and reliability
Xlr balanced inputs and speakon &banana binding post outputs
Limiter indicator for amp output protection
Stereo and mono bridge
Variable speed fan for low noise
Comprehensive front panel indicators including signal, limiter, protect and power
Dc output protection and short circuit protection
Frequency response 10hz c 50khz at 1.5 db
Total harmonic distortion: less than 0.05%
Input sensitivity & impedance: 0.775v
Signal to noise (20 hz - 20 khz) > 95db
* 1400 W continuous program power capacity
* 97dB Sensitivity 1w/1m
* 37Hz ~1800Hz frequency response range
* 4" inside/outside voice coil with OFC(Oxygen-free Copper) wire for improved power-handling and durability
* Optimized winding length for extended Xmax
* Forced air ventilation and 14mm top plate for minimum power compression
* Ideal for compact bass-reflex subwoofer application:
1. Nominal Diameter: 18 inch
2.Rated Impedance: 8 ohm
3.Nominal Power handling: 700 watts
4.Program Power: 1400 watts
5.Sensitivity(lw/lm): 97 db
6.Frequency Range 37-1.8 k hz
7.Minimum Impedance(Zmin) : 6.9 ohm
8.Voice Coil Diameter : 4 inch.
We develop, manufacture and supply high quality, high performance and competitive price of 3-phase ac servo drive (50w-5.5kw) and ac permanent magnet servo motor (0.6N.M-35N.M, 50W-5.5KW).
Servo drive: EP100/EP1/EP2/EP3.
782 Amplifiers Suppliers
Short on time? Let Amplifiers sellers contact you.
As dynamic strain amplifier, it is a low price, and it was designed and manufactured to be suitable for instrumentation control panel.
It is used for strain gauge applied sensors, and amplification of LVDT and MV output sensor.
- Built-in single step filtering function
- Built-in automatic temperature compensating circuit
- Easy to adjust zero and span by volume
- Frequency response DC ~20kHz.
As dynamic strain amplifier, it uses single or SUB rack case, and can be used as multi-channel.
It is used for strain gauge applied sensors, and amplification of lvdt and mV output sensor.
- Built-in automatic temperature compensating circuit
- Easy to adjust zero and span by volume
- Built-in single step adjustment function of gain and LPF by rotary switch
- Bridge power supply built-out optional switch
- One touch auto zero function
- Built-in self calibration function.
Description:
WLAN-2300-1W is an indoor solution 1W bi-direction Booster designed for 2.4GHz wireless LANs. This unit comes with an easy plug-and-play installation, which works together with an indoor Wireless Access Point to improve its operation range and performance. In certain conditions the unit is able to double the range of the wireless device. The unit extends signal range and can eliminate the use of an additional radio with its associated data line, power outlet, signal interference, and setup headaches.
The unit is the fast and easy way to extend your signal range in any environment. The unit is ideal for use with 2.4 GHz frequency hopping or direct sequence spread spectrum radio modems and 11 mbps IEEE802.11b devices.
The amplifiers increase range by providing transmit gain as well as low-noise receive gain. This receive gain increase the receive sensitivity of wireless LAN Access poing. Full output power of 500mW is achieved with only 32 mW input into the Booster.
Specifications:
Operating range : 2400-2500MHz
Operating mode : Bi-directional, half-duplex Time Division Duplex Senses RF carrier from Transmitter and automatically switches receive to transmit mode
Connector Type: SMA Receptacle (50 ohm)
Transmit gain : 15dB (Adjustable)
Input Trigger Power: 5~20 dBm
Optimal Input Power: 9~13 dBm
Receiver Gain: <12 dBm
Noise Figure: 3.5dB typical
Frequency Response: ¡À 1dB over operating range
Power Adaptor: 5~7V /DC 105~240V for AC Adapter
Operating Temperature: -20 to 70 ¡ãC
Operating Humidity: Up to 95% relative humidity
Material: Cast Aluminum
Package Weight: 560g.
Designed for extending the range of 2.4GHz wireless radio devices, the booster amplifier is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems . The unit provides the transmit power gain as well as receive signal gain.
Proprietary in-house MMIC design allows sensing of input power level and protects itself against over power or reverse power operating conditions.
Feature:
• Strengthen radio signal to Increase the effective range and coverage area for Wi-Fi communication
Save wiring costs, easily build a wireless infrastructure for home or business use
Make broadband wireless application in possible coverage
No software required, easy to install
Specification
Frequency Range 2.4GHz
P1dB 33dBm
Linear Pout 26dBm (@5.5%EVM) , 64QAM
Tx Mode Turn on Power > 2dBm
Tx Gain 13~17dBm
Rx Gain 8~12dBm
Turn on Power > 2dBm
Tx Gain 13~17dBm
Rx Gain 8~12dBm
Rx Noise Figure 3.0dB
VSWR, input/output < 2
DC supply 9~12V
Operating temperature -40~+70 oC .
Spesifikasi TB-400 Booster144mhz 2m Band : Frekwensi area : meliputi 142 Mhz - 146 Mhz Output power : 400 Watt Input drive : s/d 20 Watt Tegangan DC : sd. 1800V DC Power Penguatan : 12.1dB rata-rata Konsumsi Power : 230V AC sd 6A Tabung Penguat : GI7BT triode Koneksi Relay : Relay desain khusus untuk nput dan output (spec s/d 1 Kw) Panel Meter : Kontrol Grid meter dan RF Power O/P : Optional Upgrade : s/d 500 Watt Dimensi Booster : Lebar 16.5 inch x Tinggi 6 inch x Panjang 16.5 inch Berat Netto : 22.5 kg Paking : Booster dalam sterofoam dan kardus diluar Box kayu Jaminan Garansi
Booster dalam sterofoam dan kardus diluar Box kayu Jaminan Garansi
Features:
1.built in adjustable Gain & Slope
2. Built in power supply
3. Connectors:"F"type female
4. Output test point and screw terminal for equippotential bonding
5. Metal-Plastic Housing For indoor mounting
Specifications:
ModelAS205S
No.of Inputs3UHF, 1BIII, 1BI+FM
No.of Outputs2
Frequency UHF1: (MHz)470óª862
UHF2: (MHz)470óª862
UHF3: (MHz)470óª862
BIII: (MHz)174óª230
BI+FM: (MHz)47óª68/88óª108
Gain(UHF1,UHF2,UHF3,BIII,BI+FM) (dB)20
Output Level(UHF1,UHF2,UHF3,BIII) (dBuv)115
BI+FM: (dBuv)110
Slope Adj. (dB)20
Slope Adj.ú¼Typical (dB)15
Return Loss (dB)_óª12
Noise Figure (dB)<6
Test Point Attenuation (dB)_óª20
Power Supply (Vac/Hz) 90óª260/47óª63
Max AC Pass Current(switchable) (mA)1200
DC Pass (V)18
Operating Temperature Range (¿¼C)-20óª+60.
We are the authorised dealers for "amperes"-known for its complete range of equipments in conventional public address systems in india.
The iso9001: 2000 certification that amperes obtained in 2006 for "design and manufacturing of public address system" only demonstrates full commitment in producing the most optimum and affordable equipments for our customers.
Amperes has been directly involved in thousands of installations, be it small or large, simple or complex, part or full systems at airports, hospitals, government offices, recreation facilities, hotels, schools, universities, shopping malls and hundreds of other public spaces.
Amperes is present in the following locations worldwide: singapore, brunei, uae, vietnam, sri lanka, india, philippines, indonesia, myanmar and thailand.
The Migra Compact 4 (MC4) is a 4-port amplifier with one active output. MC4 offers up to 47 dB gain with two distribution outputs and one loop-through output.
The MC4 functions as a line or distribution amplifier in all types of HFC networks, including those using digital transmission. This high gain RF amplifier is well prepared for the full digital loading of broadcast signals.
