Volume: 310ml
Curing system: acetoxy- smooth paste- netral
Densty: 0, 97 / 1, 20 +/- 0, 03g/ml
Curring rate: 2, 0 mm/day
Application temperature: +5/+40c
This informations for generally for more information please visit our web site
WJWAX specializes in providing Naphthenic mineral oil (Cycloalkyl mineral oils), which can be used for rubber plasticization and also for hot melt adhesive products. If you need this white oil product, please contact us for price and parameter information (TDS or COA).
Naphthenic mineral oil N4010, N4006 is a versatile and commonly used ingredient in hot melt adhesive formulations. Its unique properties contribute to the overall performance and functionality of adhesives in various applications. Here are some key aspects of using naphthenic mineral oil for hot melt adhesives:
1. Plasticization: It acts as a plasticizer in adhesives, improving their flexibility and tackiness. It helps enhance the adhesive's ability to conform to different surfaces and maintain adhesion under stress or movement.
2. Viscosity Control: It plays a crucial role in controlling the viscosity of adhesives. By adjusting the amount of mineral oil in the formulation, adhesive manufacturers can achieve the desired consistency and flow characteristics for specific application requirements. It helps ensure proper coating, spreading, and bonding during the hot melt glue application process.
3. Thermal Stability: It exhibits good thermal stability, allowing hot melt adhesives to maintain their adhesive properties even at elevated temperatures. This stability ensures that the adhesive can withstand the heat generated during application and subsequent use without compromising its bonding performance.
4. Adhesion Properties: It contributes to the adhesion properties of adhesives. It improves the adhesive's ability to bond to various substrates, including plastics, paper, wood, and textiles. The mineral oil enhances the wetting and spreading of the adhesive, promoting strong and durable bonds.
5. Compatibility: It is compatible with a wide range of other components commonly used in adhesive formulations. It blends well with polymers, resins, additives, and other ingredients, allowing for easy formulation and customization of adhesive properties.
6. Cost-Effectiveness: It is often a cost-effective choice for hot melt glue. It is readily available, and its use can help optimize the overall formulation cost while providing the desired performance characteristics.
Overall, naphthenic mineral oil plays a critical role in enhancing the performance of hot melt adhesives. Its plasticization effect, viscosity control, thermal stability, adhesion properties, compatibility, and cost-effectiveness make it a valuable component in formulating adhesives for various applications, including packaging, woodworking, automotive, and textiles. Adhesive manufacturers can leverage the benefits of naphthenic mineral oil to create adhesives that offer reliable bonding, flexibility, and durability in a wide range of industries.
Our hot melt adhesive is a high-quality, versatile adhesive that can be used for a variety of applications.
It is fast-setting and strong, making it ideal for bonding a variety of materials, including plastics, wood, fabric, and metal.
It is also non-toxic and solvent-free, making it safe to use in indoor and outdoor applications.
We offer a variety of hot melt adhesives to meet your specific needs, so please contact us today to learn more.
DEEP POUR 2 PART RESIN
CRYSIN5.0 is a crystal clear two-part epoxy resin system which can be poured at 5cm once.
Low oder and zero VOCs makes CRYSIN5.0 an ideal resin for large projects, makin jewelries, or epoxy incorpotated furniture.
Mixing Ratio for Crysin 5.0 is 3 (Resin) : 1 (Hardner)
At room temperature 25 C (77 F) : 24~48 Hours
Curing time may vary depending on the room temperature and humidity.
6 16 Hours after first coating (Dry to touch)
5cm
Key Features
1. Crystal clarity
2. Self-defoaming
3. Shore D Hardness of 80 or above
4. Deep casting between 25-50mm per pour
5. Naver top-selling products
Cautions
1. Do not drink
2. Do not add the liquid into a spray bottle
3. Keep out of reach of children and infants
4. Do not throw the container
5. Do not leave the product on skin for long duration. Rinse skin with warm running water and soap
6. Wearing protective gloves, protective clothing, eye protection is recommended
7. Store the product in a well-ventilated area away from heat/sparks/open flames/hot surfaces
8. In case of fire, use alcohol-resistant foam, dry powder, or sand
The price on this site is based on the smallest size of Crysin 5.0 which is 400g and MOQ of 1000 sets. For quotes on larger sizes please enquire.
HomeSure Tile Adhesive is cement based general tile adhesive. It contains highest grade of graded sand,
cement, selected fillers, polymers and chemical additives to give it unique properties.
We offer Tile Adhesive in 3 different variants:
Silver Star: General purpose tile adhesive for ceramic tile, tile on tile for wall and flooring application.
Gold Star: Higher grade of water resistant tile adhesive suitable for Vitrified, Marbonite wall and
flooring application.
Platinum Star: White cement based tile adhesive for fixing Marble, Granite, Glass tiles etc. for wall and
flooring application.
Standards :
Complies the specification of ISI 5477: 2004
Silver Star and Gold Star : Type I
Platinum Star Type II
Features :
- Excellent bonding to the
base plaster/concrete even
at a thickness of 2mm
- No need for hacking
- Water resistant
- Can be used on new as well
as old walls and floors
Advantages :
- Good workability
- Ease of use at site
- Suitable for interior
- Suitable for exterior along
with additional metal anchoring
- Consistent work quality
Benefits :
- Durability
- Saves time and Increase productivity
- Cost effective
- No curing required
Surface Preparation :
- Clean loose particles, dirt, grease and traces of foreign material from the surface, if necessary by using
wire brush / sand paper or by chipping.
- For loose plaster areas, remove the defective material and replaster the area with Ready-Mix Plaster.
- For floors / walls, which are not even, replaster with Ready-Mix Plaster to make them even.
- New Construction : Before tiling the new construction should be cured for 6 weeks.
- Old Construction : Remove all loose portions and make good with sand cement slurry bonding coat prior
to apply HomeSure Tile Adhesive.
Mixing :
- Take clean water as per the water demand in a clean bucket. Add 1 kg HomeSure Tile Adhesive.
Stir continuously by hand to obtain a homogenous lump-free paste. Tile Adhesive should be creamy
like butter.
- Allow the resultant paste to stand for about 5 minutes for the additives to dissolve.
- Re-mix again for about 2 minutes. The mixture is now ready for application.
- Use the mix within 30 minutes.
Application :
- Dampen the surface to be plastered with clean water, Allow excess water to drain off.
- The tiles should be immersed in water for about two hours before fixing.
- Using a steel trowel/ blade, apply the above mix to a thickness of 2-3 mm either on the wall or on the
back of the tile (but not both).
- Using a notched trowel remove excess material, Put the tile in place and tap gently with a wooden
hammer.
- Remove excess mixture from the tiles by using a damp cloth or sponge.
Product feather:
(1)One component, good contact deformation, easy to construct
(2)High strength.
(3)Good compatibility and wide use.
(4)Environmental friendly, pass SGS, ELV standard certification.
(5)High elasticity and good adhesion.
(6)Resistant to water, oil and aging.
(7)No solvent, no shrinkage after curing.
Using way
Suitable for bonding and sealing among various materials such as metal, alloy, glass, wood, concrete, marble and ceramics. Can be applied to the construction industry, industry, transportation industry, home appliance industry, furniture industry and other industries. To do some adhesion test before a large number of use. If necessary, do roughening or adding primer before adhesion.
Our bookbinding pur hot melt adhesive offers many advantages. For example, it provides great aging resistance, ink corrosion resistance and weathering resistance. In addition, the pur hot melt glue is resistant to high and low temperatures, from -40 to 120 degree celcius. Our product also offers good viscosity stability, chemical resistance, high initial and final bond strength when used at a proper temperature. Thanks to its high adhesive property, our pur adhesive can be used for bonding pp, uv coated paper, synthetic paper, etc. Moreover, the good tensile strength of our products helps solve book page falling out problem. As the use of our pur hot melt glue can greatly improve product quality while not increasing cost, our bookbinding pur hot melt adhesive is widely used by bookbinding companies.
Our company provides paper plastic lamination use hot melt adhesive, which can be used for pe, pp, opp, pet and pa films, aluminum plated film, etc. As pe film and pp film belong to nonpolar film and are very difficult to stick to the paper, they have to undergo corona treatment to achieve required surface tension.
Unlike solvent based adhesives, our PUR hot melt adhesives for automotive industry eliminate volatile organic compounds, so it is safe to use for both people and the environment. In addition, our PUR hot melt adhesive offers high bond strength, aging resistance and vibration resistance. Moreover, the great weathering resistance allows our PUR hot melt adhesive to be used in harsh environments.
Our company provides a wide range of PUR hot melt adhesive for automotive industry, including PUR hot melt adhesive for automotive dashboard (model PUR-1228, PUR-3061), PUR hot melt adhesive for automotive headlamp, fog lamp (model PUR-750-2), PUR hot melt adhesive for automotive ceiling and ceiling accessories (model PUR-3061, PUR-1228, PUR-7520), PUR hot melt adhesive for automotive coat hanger(model PUR-3061), PUR hot melt adhesive for automotive trunk side body and spare tire cover (model PUR-1228). Please refer to the following table for more detailed information regarding our products.
ZION All purpose Adhesive is extremely strong, retains its strength and stays flexible. This polyurethane adhesive is classed as reactive adhesive. Typically reactive polyurethane adhesive can be showed strong adhesive strength as time goes on. Finally adhesive strength will last semi-permanently.Becausethese adhesives are manufactured by reacting mixtures of polyols with an excess of diisocyanate. The reaction of an isocyanategroup(-NCO) with an alcohol group(-OH) produces the urethane group(pre-polymer). The polyurethane pre-polymer includes from about 3% NCO to about 4% NCO. Isocyanate terminated polyurethane pre-polymer cured in the presence moisture. Moisture, which is present in the ambient atmosphere reacts with isocyanate end groups and this react will occur chain extension or crosslinking which will cause the curing reaction. This reaction can be showed strong adhesive strength as time goes on. A modern adhesive must have a long shelf life. Reactive adhesives meet this standard.
Special Features
Tough / flexible polyurethane pre-polymer.(reactive polyurethane, nco% : 3~4%)
One-part moisture cure.
Solvent Type(not use B.T.X, Benzene, Toluene, Xylene)
Zero formaldehyde
Adhesive is extremely strong, retains its strength
Stays flexible
Allows for structural movement
Has excellent resistance to weathering and water.
High performance polyurethane adhesive becomes tack-free in 12~24 hours, cures completely in 1~2 days
Strong adhesive and seal retains strength
Excellent resistence to weathering and water, heat
Bonding, attaching and assembling
Physical properties
Container 20, 50, 100, 200g(tube)
Base Polyurethane Pre-Polymer
Color Clear transparent
Specific gravity 1.1~1.12
Working temperature -15â?? ~ 40â??
Solid content 77~80%
Viscosity 3500~4500(room temperature)20â??
Applications
Wood
Wood to steel, fiberglass
Glass
Metals(Aluminum, SUS, CU)
Plastics, PET, ABS, PC, PVC(In case of PP, PE, need corona treatment)
Paper
Shoes
Leather
Mainly working as thickening, stability, cohesion, harmony, polishing, sizing, bonding, solid water etc., Industrial gelatin is widely used in various products of industries like board sheet, furniture, matches, feed, packaging, paper, textile, silk, printing and dyeing, printing, ceramics, petroleum, chemical, paint, metallurgical etc.
Epoxy is substituted by DURAFLEX which has been launched and had excellent feedback from our customers. It's the environmental friendly, non-toxic paint which apply in multiple layers with smooth surfaces.
Used as waterproofing coating and burnish surface coating in wet and fouling protection areas.
Hypercoat-688 is the range of high performance, seamless, cold-applied liquid water-proofing membrane.
1. Excellent hydrolysis resistance.
2. Still can curing when apply on the moisture surface without observed water.
3. The middle layer of the tile, the top coating or each cement-based finished surface.
900 Adhesive Sealants Lubricants Suppliers
Short on time? Let Adhesive Sealants Lubricants sellers contact you.
