Two-component polysulfide sealant, as known as a two-component, non-sag, premium polysulfide sealant, which is also called polysulfide sealant for building made up of liquid polysulfide rubber, and add tackifying resin, vulcanizing agent, accelerant and fortifier into it. It contains two components and it can vulcanize and crosslink by itself at room temperature. The two components have clear color difference, which makes the mixing more convenient. It can keep good air tightness and water resistance in continuous vibration and temperature changes. In addition, it has a good bonding effect for metal, concrete and other materials.
Application
The polysulfide sealant is suitable for outdoor or indoor and can be used to seal both static and dynamic joints:
Used to caulk at concrete, building, and bridge.
Used in anti-leakage caulking of various types of expansion joints, such as waterworks, swimming pools, reservoirs, power plants, dams, sewage treatment works and water supply and drainage systems and other projects.
Used as the joints of precast concrete, and the seams of the glass and construction.
Used in the seaming of metal siding, and the bonding of aluminum window frame.
Using method
Add component B and pigment into component A;
Stir quickly up and down until it is well mixed;
Wipe the mixed sealant in the site where is waiting for construction with a small shovel;
Don´t soak and contact with water within 48 hours after construction.
Note
Component B should be fully added into component A, which will affect the curing time and plasticity;
The available time of mixed sealant is 2 hours. So the sealant should be used up as soon as possible after preparation to avoid the paste curing;
The surfaces waiting for construction must be clean, dry and frost-free, and must be free of oils, grease, paints, coatings, sealers, curing compound residues, and any other foreign matter that might prevent adhesion;
Notice to avoid water and rain within 48 hours after construction.
900 Adhesive Sealants Lubricants Suppliers
Short on time? Let Adhesive Sealants Lubricants sellers contact you.
Neutral silicone structural adhesive sealant is a kind of high modulus and high elasticity silicone rubber. It with good weather resistance is easy to use and work well in bad weather. Compared with non-structural adhesive, the structural adhesive sealant with high strength can bear high capacity without damaged. And it can form a strong bond with most of materials without primer. So it not only can be used in constructions but also can be used in glass and ceramics industry. Compared with two-component polysulfide sealant, neutral silicone structural adhesive sealant can be used directly without mixing. In addition, our products are non-toxic, non-polluting products. You can use it without any worries.
Specification
Density: 1.5 g/cm3.
Elongation: 150%.
Tensile strength: 100 MPa.
Color: black, white, gray, transparent, red, green, brown and so on.
Specification: 590 ml.
Package: in carton. 20 per carton.
Feature
High strength, high bearing capacity.
Aging resistance, corrosion resistance.
Excellent stability and durability.
Good adhesion and sealing performance, can form a strong bond with most materials.
Insulation performance.
It has shock absorption effect.
High and low temperature resistance.
Good elasticity and flexibility.
It can be applied to various materials.
Easy to use. Single component, don't need to mix.
Application
The seal of window and door. Aluminum, titanium and plastic steel.
Glass curtain wall, aluminum plate curtain wall.
Various kinds of glass.
Concrete and cement constructions.
Marble ground and wall.
Various metals.
Wood and furniture.
Ceramics.
Kitchen.
Bathroom.
Single component polyurethane sealant, as known as a single component, hydrophilic, water activated, hydro active, expandable, gungrade waterstop, is also called single component polyurethane hydrophilic expansion waterproofing sealant. When in contact with water, the sealant expands and produces an expanding pressure. The pressure between the expanded sealant and the surrounding concrete structure prevents water penetration through the joint and provides a durable waterproofing solution.
Advantages
Based on the physical and chemical properties of the polyurethane sealant, it has many advantages. Such as:
Expansion rate. The polyurethane sealant has a strong expansion capacity. It can expand to 220% or 300%, 400%, 500%, even 600% of its own volume.
Strong adhesion. It can used to steel, HDPE, PVC, and other common building materials, and it also effective to damp surfaces.
Good weather resistance. It has low temperature flexibility, and its service life of up to 15 to 20 years.
Environmentally non-toxic. It has good chemical resistance, and it tested can be resistant to hydrochloric acid, salt water, sodium carbonate, potassium hydroxide and other chemicals. In addition, it is safe and non-toxic when in contact with drinking water, belongs to environmentally friendly products.
Ease to use. It can be applied with a standard caulking gun.
Application
Polyurethane sealant is widely used in construction, transportation and other industries. Such as the following usage:
Caulking agent. The polyurethane sealant is used as caulking agent in the construction of subways, tunnels, underground parkings and other projects.
Sealing waterproof. In building construction, it can play a role of sealing waterproof for doors and windows, exterior walls and other parts.
Water stop. It can be used as water stop when punctures are found in plumbing, sewer lines and other utility pipes.
Single component polyurethane water-swelling sealant is a kind of polyurethane type amorphous paste with one-component, solvent-free, water swelling. The amorphous paste ensure that it can be used to prevent infiltration in irregular base. It has double sealed water stop function. Single component polyurethane water-swelling sealant not only has elasticity water stop of rubber but also has volume expansion stop water after soaking. And it can be cured in humid environments. Curing time depends on the temperature and humidity of environments. Compared with waterstop, it can be used in various irregular seams, especially between different materials, wet, pile head and other parts. And it also can be used in vertical surface without sag. Water-swelling sealant can be divided into two kinds according to the swelling ratio: PJ220 and PJ400. It is the economic choice for customers.
Specification
Hardness: 65.
Temperature range: -4080°C.
Expansion rate: 220%.
Package specification: 600 ml per unit.
Package:
Single component polyurethane water-swelling sealant is packed in foil papers.
Each box has 20 single component polyurethane water-swelling sealants.
Glue gun installation tips
Single component polyurethane water-swelling sealant should used with glue gun. The right picture will show you how to install the single component polyurethane water-swelling sealant in glue gun. It is easy to learn and use.
Feature
Good seal and water stop effect.
Good durability, excellent chemical stability.
Flexibility, applied to various irregular base.
Good adhesion, moist ground also can be bonded firmly.
The rate of mass change is low.
Construction is simple, easy to operate.
Environmentally friendly products, safe and non-toxic.
Economic price.
Application
Underground constructions.Tunnel.Protective engineering.Subway.Sewage treatment tank.Construction joints.Deformation seam.Wall seam.Pipe trench.Filling and sealing joint of door.Sealing joints of window.Expressway.Bridge.Airport runway.
Novo Tile a cementations based powder is available in grey or white color.
Novo Tile Is containing selective raw materials resist the grow thing of bacteria and molds on the surface.
USES
Novo Tile a high quality adhesive and permanent fixing of ceramic tiles in both damp and totally submerged conditions e. g. Swimming pools. Can also be used for fixing of insulting and acoustic boards on expanded polystyrene etc.
ADVANTAGES
1.Can be used in totally submerged conditions.
2.Good slip resistance.
3.Anti-bacteria.
4.Highly adhesive and bond strength.
Coverage
7- 8 m/ 2 mm / 25 Kg depend on the surface conditions and thickness of tile
Tile Adhesive C1 T100 is a tile adhesive with cement base.It is ideal for the adhesion of ceramic wall or floor tiles to surfaces made of concrete and plaster.It is used for both indoors and outdoors.It is classified as glue type C1 at EN 12004
Shades : White
Tile Adhesive C2T T280 is a tile adhesive of cement base enhanced with acrylic rytines of high quality.It is suitable for the tile pasting of low to zero absorbance such as klinker, cotto , granite,glass -inlay, porcelain tiles.It does not slides in the vertical surfaces.For both indoors and outdoors.
It is classified as glue type C2T at EN 12004.
Shades : White
Consumption : 2-5 kg/m2
Sealant
The Sealant technical data should meet the following requirements, and please provide the mastic data sheet and quality certificate documents.
We are manufacturer of sealant, foam glass, polyurethane foam, thermal insulation material, pumice stone, grill stone with high quality and best service.
This series of products can achieve good adhesion effect, environmental tasteless, high strength adhesion, cold resistance, aging resistance, etc. Excellent performance and stable quality can provide the perfect adhesion scheme to various manufacturers. Belongs to green environmental protection paper filter core special glue. Softening point of 80 degrees or so, oil resistance, water resistance, resistance to high and low temperature alternating, weak acid, excellent aseismic performance and good stick relay, fundamentally solve the industry's long plagued a filter degumming problem such as rubber, plastic shrinkage, crack, is currently the most ideal paper filter adhesive. Room temperature curing, the process is simple, easy to use, can be manipulated manually, can also mechanical operation.
The company supplies thelow - temperature hot melt adhesive, and the low temperature not brittle glue, the quality assurance, welcome the consultation to negotiate. The series is not easy to break at low temperature, and it can guarantee the fastness and reliability of adhesion products. The products are blocky, lolliform, granular, white and yellow products, welcome to inquire.
Fast curing speed and near maximum bonding strength. High adhesion strength, durable and excellent uv light. Good temperature resistance, wide temperature range. Adhesion surface does not require strict treatment, easy to use. Excellent resistance to oil, water, acid, kerosene, ethanol, alkali, heterocyclic hydrocarbon, nuclear radiation, etc. Safety and toxicity characteristics: it has a very slight odor, no inhalation danger, and no toxicity after curing. Storage stability is good, the storage period is one year.
This series product is suitable for use in medical industry, the softening point of 80 degrees or so, wide range of uses, specific have infusion stick gum, gum base cloth, pressure sensitive adhesive products, such as white, yellow and black lump hot melt glue, to ensure product safety and health, no harm to human body health, to ensure that the use of rest assured with enjoyable. Hot melt adhesive is an environmental hot melt adhesive which meets the international fda standard and is not allergic to the skin. With the constant innovation of medical supplies, hot melt adhesive is more and more play its unique role, it has long been used in medical supplies material bonding, now it is a bigger role as the carrier of drug and skin nicely.
Resin hot melt adhesive, softening point of 80 degrees or so, this series of product is suitable for display rack of goods. They have several models, such as a combination of adhesive, white to transparent block hot melt adhesive, guarantee the robustness and stability of adhesive products, viscosity is extremely strong, without extra adhesive, suitable for all kinds of working environment.
Product td-828 hot melt pressure sensitive adhesive, good adhesion, resistance to aging, softening point 85 degrees, can resist high temperature 80 degrees not melting, -20 degrees do not peel away. The operating temperature is recommended at 165-175 degrees. Nowadays, it is widely used in paperboard, shop display rack, packaging materials, carton, cardboard, color box, glazed box of glazed oil carton, and film carton box... Base material coated with glue. The products have been certified by sgs, which is non - toxic.
This product is suitable for bonding and combination of pearl cotton, softening point of 80 degrees or so, and yellowing resistance, will not affect the product quality and color specifications, such as the maximum extent to ensure the stability of the bonding material, not out of shape. For white colloid form. Epe pearl cotton glue composition analysis, curing material, viscosity, non-volatile detection. Epe pearl cotton glue ingredient analysis, curing content, viscosity, nonvolatile matter detection epe glue is a kind of polymer as the main body of one-component adhesive products, the new solution designed to remove epe materials difficult problem of epe special glue.
1.It has the advantages of room temperature curing, convenient operation, high initial adhesion, transparent, yellow and yellow change, fast positioning and non-toxic. 2. Single component, excellent water resistance, heat resistance, cold resistance, aging resistance, acid and alkali resistance, corrosion resistance, oil resistance and albinism. 3. Through the eu rohs standard, the storage of 1 year will not deteriorate, is the current domestic adhesion nylon plastic adhesive field of the first product. Epe materials dedicated plastic glue adhesive is widely used in epe foam packaging material, suitable for epe foam epe foaming, pp, pvc, sponge, foam, wood, polystyrene material such as glue, as well as the pearl cotton, soft material such as eva adhesive effect is obvious.
900 Adhesive Sealants Lubricants Suppliers
Short on time? Let Adhesive Sealants Lubricants sellers contact you.
