Truck Mounted Drilling Rig

Brief description:

The PDTHR-450 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-450 rigs flexibility means it can be mounted on two truck versions and on local trucks matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling

Optional: Skid mounting

Key features:

Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves
Key specification:

Drill HOle Diameter : Dia 8" DTH/ 12 1/4" Rotary
Depth : 450 Meters-600 Mtr Optional
Carrier : Man/ Ashok Leyland Trucks (6x4 Wheel Drive)
Air Compressor : 1200 cfm @ 350 psi
Mud Pump : 765 lpm @ 16 Bar
Application : Water Well
Optional : Skid/Two truck version/Trolley/Crawler

TST-150 truck-mounted drilling rig is the new designed rig used for petroleum, coal and minerals prospecting and sampling in complex terrain formation area. It is mounted on WTC5225TSM 6*6 off-road truck chassis. Power takes from chassis engine. The drilling rig uses hydraulic driving. It can carry out air drilling, mud drilling normal circulation function.

Main technical parameters:



Max drilling depth

Mud drilling: 150m, air drilling: 80m

Drilling method

Mud drilling, air drilling

Drilling tools

Drill bits (dia)

Ф114mm

Drilling pipe (DiaXLength)

Ф60�4500mm

Power swivel

Output torque

3400N.m

Output rev. scope

0-160 r/min

Pull-up & pull-down system

Max pull-up force

32kN

Feed rate

0ï½?0.4m/s

Max Pull-up rate

1.7m/s

Hydraulic system

Oil pump rev.

1600r/min

Working pressure

Rotating

17MPa

Pull-down

12MPa

Mud pump

Pressure

3MPa

Flow rate

300L/min

Screw air compressor

Pressure

1.2 MPa

Displacement

12.5 m3/min

The PDTHR-300 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-300 rigs flexibility means it can be mounted on single truck version, two truck versions and on local truck matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling

Optional: Skid mounting

Key features:

Proven technology ensures easy maintenance and more productive.
The rig can be customize as per customer requirement

Key specification:

Drill rod handling : 15 feet (4.5 meter) - 20 feet (6.0 meter)

Drilling depth : 1,000 feet (300 meters)

Drilling diameter : 6.5 inch (165 mm) - 12.25 inch (311 mm)

Pull up force : 11,200 kgf

Drill head torque : 600 kg.m

Air compressor : 1,100 cfm/300 psi

Mud pump : 700 lpm-1,000 lpm

Carrier : Truck(Optional: Skid)

Description:

The PDHTR-300 drill rig is ideal for exploration drilling application in Water Well. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-300 rig's flexibility means it can be mounted on single truck version, truck matching the rig to the terrain it will be used.

Optional: Multipurpose drill rig (DTH, mud rotary)

Key features:

Proven technology ensures easy maintenance and more productive.
The rig can be customize as per customer requirement.
Technical specification:

Drill rod handling

20 feet (6.0 meter)

Drilling depth

Up to 300 Meters.

Drilling diameter

6 1/2 inch (165 mm)

Pull up force

12,000 Kg-f

Drill head torque

85 kg.m - 700 kg.m

Gear Box

Dual speed gearbox

Mud Pump

765 lpm @ 16 Bar
Carrier

TRUCK

Optional

Tractor/Skid/Trolley

Main application
Drilling wells for urban and rural life
Drilling wells for agricultural irrigation and industries
Drilling for geotechnical survey
Drilling construction engineering holes
Drilling geothermal pump wells


Drilling parameter

Hole diameter: 120--1500(mm)
Hole depth: 350(m)
Run of rod : 3, 4(m)
Drill rod diameter: f73 f89 f95 f133(mm)
Drilling technology: normal and reverse circulation for both mud and air
Down-the-hole hammers: middle-high-pressure air

Performance parameter

Drill head inside diameter : f80 f120
Drill head lifting force(kn): 130(kn)

Drill head spin speed:
A(forward:20-33-73, reverse:13-23-47r/min)
B(forward:41-66-146, revers:26-43-94r/min)
B(forward:36-58-127, revers:23-37-80r/min)

Shape parameters
Dimensions: (l-w-h) working conditions 9600�2950�7900(mm)
Transport status: (l-w-h) 10200�2470�3300(mm)
Supporting form: hydraulic type
Mast up-down: hydraulic type
Rig mass: 12500(kg)
Truck: ?dongfeng? brand eq1141, cummins engine 132kw
Power unit of rig: ?deutz? brand diesel engine
Power: 84(kw)
Mud pump: bw600/30 mud pump
Flow(m�/h): 720l/min 513l/min 335)l/min
Pressure: 3 mp 4 mp 5mp
Main hoist lifting force: 25(kn)
Auxiliary hoist lifting force: 8(kn)

Large drilling equipment drilling rig, lifting capacity of 100 tons, can be used for coalbed methane, oil, natural gas extraction, geothermal, 3000 meters deep water well drilling, coal mine rescue, etc.
Need fewer workers than ordinary well drilling equipment, convenient relocation, saving expenses, high efficiency high return on investment for a wide range of uses.

Crawler Mounted Versatile Well Drilling Rig
Truck Mounted Well Drilling Rig
Its smaller size can be adapted to various construction sites.
Rated Drilling Depth
300m
Application
JKS300B Crawler Mounted Versatile Well Drilling Rig is applicable to the drilling process of water wells, monitor wells and geothermal wells, etc.
Product Features
JKS300B Crawler Mounted Versatile Well Drilling Rig is a new type of efficient and versatile hydraulic rig. It is mainly applicable to the drilling process of water wells, monitor wells, and geothermal wells.   
When drilling in the rock layer, the rig adopts DTH hammer for penetration and compressed air for cleaning, with a penetration speed being dozens of times quicker than conventional rotation rigs. 
In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions. 
Winch can lift stuff upwards of 6m, facilitating installing pipes. 
Hydraulic supporters facilitate the rig erection on site without crane. 
Smaller size makes it adaptable to various kinds of construction sites.
 We also provide Truck Mounted Well Drilling Rig ,Airman Air Compressor,Hydraulic Crawler Drills and soon
Rated Drilling Depth 300m
Borehole Diameter 105-350mm
Engine Power 92kW
Maximum Lifting Force 15T
Small Winch Lifting Force 1.5T
Rotation Torque 8500N.m
Rotation Rate 0-40/80rpm

Crawler Mounted Versatile Well Drilling Rig
Truck Mounted Well Drilling Rig
Its smaller size can be adapted to various construction sites.
Rated Drilling Depth
300m
Application
It is applicable to the drilling process of water wells, monitor wells and geothermal wells, etc.
Product Features
JKS300B crawler mounted versatile well drilling rig is a new type of efficient and versatile hydraulic rig. It is mainly applicable to the drilling process of water wells, monitor wells, and geothermal wells.   
When drilling in the rock layer, the rig adopts DTH hammer for penetration and compressed air for cleaning, with a penetration speed being dozens of times quicker than conventional rotation rigs. 
In loose rock, the rig employs a cutting bit or cone bit and uses mud to clean the dirt, its versatility suiting for all kinds of complex geological conditions. 
Winch can lift stuff upwards of 6m, facilitating installing pipes. 
Hydraulic supporters facilitate the rig erection on site without crane. 
Smaller size makes it adaptable to various kinds of construction sites.

Rated Drilling Depth 300m
Borehole Diameter 105-350mm
Engine Power 92kW
Maximum Lifting Force 15T
Small Winch Lifting Force 1.5T
Rotation Torque 8500N.m
Rotation Rate 0-40/80rpm
Feeding Stroke 3600mm
Lifting Speed 0-18m/min
Grade Ability 15°
Hydraulic Generator (optional) 24kW/380V
Flow of Foam Pump (optional) 20L/min
Dimension (L x W x H) 6300mm x 2000mm x 2300mm
Working Size (W x H) 3100mm x 6900mm
Weight 8.5T

Truck Mounted Well Drilling Rig Features


JKCS300 truck mounted versatile well drilling rig is a new, efficient and multifunctional hydraulic rig, mainly applicable to all kinds of drilling process of wells, monitor boreholes, geothermal boreholes, and grouting holes of cofferdam, dam and reinforced base, as well as drilling of open pit mining, anchor reinforcement project and defense project. The rig equips with powerful hydraulic motor, heavy hydraulic drilling arm and high pressure DTH percussive hammer, and its drilling speed is faster than other type of rigs.



Truck Mounted Drilling Rig parameters
Specifications of JKCS300 Versatile Well Drilling Rig
Borehole Diameter Ï?105-350mm
Borehole Drilling Depth 300m
Working Air Pressure 1.05-3.05MPa
Air Consumption 16-35m³/min
Rod Diameter Ï?89mm, Ï?102mm, Ï?114mm
Rod Length 3m / 4.5m
Grade Ability 15°
Winch System ( standard main winch & optional tooling winch)
Lifting Force 15t
Lifting Height 8m
Feed System
Axial Pressure ±6t
Rotation Torque 4500N.m
8500N.m
Rotation Rate 0-80rpm
0-160rpm
Weight 8t (excluding vehicle)
Dimension (L x W x H) 10500mm x 2480mm x 3050mm (transport)
Working Size (L x W x H) 11000mm x 2480mm x 7147mm
If you are finding Truck Mounted Drilling Rig Factory, we will be your best choose! We are dedicated to providing our customers with high quality and hightech products.