Crawler Mounted Dth Drilling Rig

Crawler Mounted Versatile Well Drilling Rig
hydraulic drill rig, Automatic Crawler Mounted DTH Drill Rig
A new, efficient, and versatile hydraulic percussive well rig
Rated Drilling Depth
500m
Site Condition
It is mainly applicable to the drilling process of wells, monitor boreholes and geothermal boreholes.
Product Features
JKS500C Crawler Mounted Versatile Well Drilling Rig is a new, efficient and multifunctional drill rig, mainly applicable to all kinds of drilling process of wells, monitor boreholes, geothermal boreholes, grouting holes of cofferdam, dam and reinforced base, as well as long hole drilling of open pit, anchor reinforcement and defense project.
The rig equips with powerful hydraulic motor, heavy-duty hydraulic drilling arm and high pressure DTH percussive hammer, and its drilling speed is faster than other type of rigs. 
We are Crawler Mounted Drill Rig Supplier and Crawler Mounted Drill Rig Factory
Rated Drilling Depth 500m
Drilling Diameter 105-350mm
Working Air Pressure 1.05-4.5MPa
Air Consumption 16-60m³/min
Drilling Rod Diameter Ï?89mm, Ï?102mm, Ï?114mm
Max. Lifting Force 25T
Axial Pressure ±10T
Lifting Force of Small Winch 1.5T
Lifting Force of Main Winch 4T (optional)
Rotation Torque 9500N.m
Rotation Rate 0-40/80rpm
Feeding Force 3800mm
Lifting Rate 0-18m/min
Grade Ability 15°
Hydraulic Motor 24kW/380V (optional)
Flow of Foam Pump 20L/min (optional)
Dimension (L x W x H) 6800mm x 2250mm x 2650mm

Hydraulic Drilling Rig Features


JK590C / JK590 are the new generation of diesel (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series.

In contrast with the last generation, they feature lower operation cost and humanized design.

They adopt a 70kW Yuchai diesel engine and hydraulic pump station assembly to generate power to rotate, feed, lift, walk and angle position.

During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 crawler drilling rig consume about 40% to 50% less energy (diesel or electricity), and the air displacement of matched air compressor decreases 30% to 50%.

Compared with JK590, JK590C is additionally equipped with hydraulic dust collection system, and wet type dust collector is optional if water is accessible on site.

JK590C/JK590 are mainly applicable to blast hole drilling process of hydropower construction, open pit mining, quarrying, road construction and national defense construction.





Hydraulic Drilling Rig Technical Parameters






Model JK590
Borehole diameter 90-165mm
Borehole depth 50m
Applicable rock hardness f=6-20
Working air pressure 1.2-2.4MPa
Air consumption 11-21m³/min
Feeding stroke 4138mm
Rod-changing length 3m
Max. horizontal drilling height 3370
Rotation rate 0-80rpm
Rotation torque 3000Nm
Walking speed

2Km/h, 3Km/h
Grade ability 24°
Power Yuchai 70KW/Cummins 74KW (optional)
Electric motor 45KW
Dust collector (optional) Hydraulic dry dust collector
Wet dust collector
Dimension (LxWxH) 7000mm x 2200mm x 2100mm
Weight 6500kg




The crawler drilling rigs are widely used in blasthole drilling of mining, hydropower, transportation and defense projects, as well as harbor and channel construction; The hydraulic drilling rigs are specialized in drilling the boreholes of large diameter and depth, for instance, water well drilling and geothermal well drilling.

Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs
Low operation cost and humanized design.

Borehole Diameter
90-165mm

Site Condition
It is applicable to the blast hole drilling process of hydro project, open pit mining, quarrying, road construction and defense project.
Product Features
JK590C / JK590 are the new generation of internal combustion (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series. 
In contrast with the last generation, they feature lower operation cost and humanized design. 
They adopt a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning. 
During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 consume about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%. 
Compared with JK590, JK590C is additionally equipped with dust collection system, and wet type dust collector is optional once water is accessible on site. 
JK590C/JK590 are mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project.

Model JK590
Borehole diameter 90-165mm
Borehole depth 50m
Applicable rock hardness f=6-20
Working air pressure 1.2-2.4MPa
Air consumption 11-21m³/min
Feeding stroke 4138mm
Rod-changing length 3m
Max. horizontal drilling height 3370
Rotation rate 0-80rpm
Rotation torque 3000Nm
Travle speed 2Km/h, 3Km/h
Grade ability 24°
Power Yuchai 70KW/Cummins 74KW (optional)
Electric motor 45KW
Dust collector (optional) Hydraulic dry dust collector
Wet dust collector
Dimension (LxWxH) 7000mm x 2200mm x 2100mm
Weight 6500kg

JK520 Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted Drilling Rigs, Crawler Mounted DTH Drill Rig
It features its compact design, small footprint, and humanized operation.
Borehole Diameter
90-150mm
Site Condition
It is applicable to the blasting borehole drilling process of hydro project, open pit mining and road construction.
Product Features
JK520 internal combustion (electric) crawler mounted hydraulic DTH drilling rig is the latest updated product of the "Sharp Sword" series, specially designed for the hydropower project and quarry mining project. 
JK520 can drill boreholes of various angles, ranging from horizontal angle to vertical angle. It boasts its better performance, compact design, small footprint and humanized operation.
JK520 is equipped with environment-friendly dry type dust collector, and as long as water is accessible on working site, wet type dust collector is optional.

Model  JK520
Borehole    diameter 90-150mm
Borehole    depth 40m
Applicable    rock hardness f=6-20
Working air    pressure 1.2-2.4MPa
Air    consumption 11-21m³/min
Feeding    stroke 3865mm
Rod-changing    length 3m
Max.    horizontal drilling height 2510mm
Feed    extension 1200mm
Ground    clearance 300mm
Rotation rate 0-79rpm
Rotation    torque 2500Nm
Travle speed 2Km/h, 3Km/h
Grade ability 25°
Power Yuchai    70KW
Dust collector (optional) Hydraulic dry dust    collector
Wet dust collector
Dimension    (LxWxH) 7000mmÃ?2250mmÃ?2250mm
Weight 5800kg
Wired remote    control Optional

Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted DTH Drill Rig, Hydraulic Crawler Drills
In contrast to the pneumatic drilling rig, energy consumption (diesel or electricity) saves about 40% to 50%.
Borehole Diameter
90-165mm
Site Condition
CM358A crawler mounted hydraulic DTH drilling rig is mainly applicable to the blast hole drilling process of open pit mining, quarrying, hydropower project and road constructions.
Product Features
CM358A crawler mounted hydraulic DTH drilling rig adopts diesel engine (or electric motor)  and hydraulic oil pump assembly to provide power, allowing rigs to finish moving, rotating, feeding and lifting, as well as angle positioning. 
During operation only the percussive DTH rigs consumes compressed air and in contrast to the conventional pneumatic rigs, CM358A saves about 40%~50% of total energy. 

Model CM358A
Borehole    diameter 90-165mm
Borehole    depth 50m
Applicable    rock hardness f=6-20
Working air    pressure 1.2-2.4MPa
Air    consumption 11-21m³/min
Feeding    stroke 3820mm
Rod-changing    length 3m
Max.    horizontal drilling height 3370mm
Rotation rate 0-80rpm
Rotation    torque 3000Nm
Travel speed 2Km/h
Grade ability 24°
Power Yuchai 70KW/Cummins    74KW
Electric motor 45KW
Dust collector (optional) Hydraulic dry dust    collector
Wet dust collector
Dimension    (LxWxH) 6900mm Ã? 2200mm Ã?    2200mm
Weight 6100kg

The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp

Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted DTH Drill Rig, Hydraulic Crawler Drills
In contrast to the pneumatic drilling rig, energy consumption (diesel or electricity) saves about 40% to 50%.
Borehole Diameter
90-165mm
Site Condition
CM358A crawler mounted hydraulic DTHdrilling rig is mainly applicable to the blast hole drilling process of open pit mining, quarrying, hydropower project and road constructions.
Product Features
CM358A crawler mounted hydraulic DTHdrilling rig adopts diesel engine (or electric motor)  and hydraulic oil pump assembly to provide power, allowing rigs to finish moving, rotating, feeding and lifting, as well as angle positioning. 
During operation only the percussive DTH rigs consumes compressed air and in contrast to the conventional pneumatic rigs, CM358A saves about 40%~50% of total energy. 
More information you can views here
We also provide Tophammer Drilling Rigs ,Water Well Drill Rig ,Truck Mounted DTH Drilling Rig

DTH Drilling Rig mounted on a MAN Truck up to 600 Mtr

Description:

The PDTHR-150 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-150 rigâ??s flexibility means it can be mounted on Crawler, two truck versions and on local truck matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling.

Key features:

Proven technology ensures easy maintenance and more productive.
The rig can be customize as per customer requirement All the actuators are operated by proportional control valves.
Technical specification:

Drill rod handling

10 feet (3.0 meter)

Drilling depth

500 feet (150 meters)

Drilling diameter

4.5 inch (114 mm) - 8 inch (203 mm)

Pull up force

5,000 kgf

Air compressor

600 cfm/200 psi

Mud pump flow

600 lpm - 500 lpm