Spj-400 Water Well Drilling Rig

1.The features of SPJ-400 water well drilling rig
·SPJ-400 water well drilling rig is powered by diesel engine, and can also be driven by motor in electric power area.
·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usageis: the hydrogeological conditions at the bottom of the exploration and survey; the drilling and drilling for the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling.
·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate. Use winch system to realized ecompression drilling, lifting drilling,down pipe, impact sampling, vertical drilling tower.
2.The specifications of SPJ-400 water well drilling rig
Borehole diameter 500mm-1800mm
Drilling depth 400m
Maximum output torque 18kn.m
Active drill rod 108*108*12mm
Drilling pipe 89mm
Main indlasslifting power 30kn
Assistant windlasslifting power 20kn
Rotary table latus rectum  500mm
Rotating speed (forward and inversion) 40/70/128r/min
height of the drilling tower 13m
Gross weight (excluding drill pipe) 9t
External dimension 2200*6000*13000mm
Drilling tower type A / hydraulic drilling tower
This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on.

1.The features of SPJ-300 water well drilling rig
·SPJ-300 water well drilling rig is powered by electric motors.
·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling.
·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc..
·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device
2.The specifications of SPJ-300 water well drilling rig
Borehole diameter 500mm-1500mm
Drilling depth 300m
Maximum output torque 18kn.m
Active drilling pipe 108*108*12mm
Drilling pipe 89mm
Main windlass lifting power 30kn
Assistantwindlass lifting power 20kn
Rotary table latus rectum 500mm
Rotating speed (forward and inversion) 40/70/128r/min
Height of the drilling tower 13m
Gross weight (excluding drill rod) 9t
External dimension 2200*6000*13000mm
Drilling tower Type A / hydraulic drill tower
This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on

The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp

1.The features of SPJ-300 water well drilling rig
·SPJ-300 water well drilling rig is powered by electric motors.
·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling.
·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc..
·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device
2.The specifications of SPJ-300 water well drilling rig
Borehole diameter 500mm-1500mm
Drilling depth 300m
Maximum output torque 18kn.m
Active drilling pipe 108*108*12mm
Drilling pipe 89mm
Main windlass lifting power 30kn
Assistantwindlass lifting power 20kn
Rotary table latus rectum 500mm
Rotating speed (forward and inversion) 40/70/128r/min
Height of the drilling tower 13m
Gross weight (excluding drill rod) 9t
External dimension 2200*6000*13000mm
Drilling tower Type A / hydraulic drill tower
This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on

1.The features of SPJ-600 water well drilling rig
SPJ-600 water well drilling rig is mainly used for drilling and exploration of hydrology and water wells within 600 meters, which is suitable for soil, rock and gravel layers.
The SPJ-600 water well drilling rigadopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted.
2.The specifications of SPJ-600 water well drilling rig
Drilling depth 600m
Borehole diameter 500mm-2500mm
Rotary table latus rectum 605mm
Active drillingpipe 108*108*12mm
Drilling pipe 89mm
Rotary speed 42/75/134kn.m

Main windlass single rope lifting power 35kn
hook rated load 210kn
hook lifting speed 0.15-0.47m/s
pulley block model 3*3
wire-rope diameter 20-21.5mm
Assistant windlass single rope rated lifting power 15kn
maximum lifting power of a single rope 20kn
single rope rated lifting speed 0.58m/s
wire-rope diameter 9.8mm
Windlass power 37kw
Gross weight (excluding drillingpipe) 11t

1.The features of SPJ-300 water well drilling rig
·SPJ-300 water well drilling rig is powered by electric motors.
·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling.
·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc..
·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device
2.The specifications of SPJ-300 water well drilling rig
Borehole diameter 500mm-1500mm
Drilling depth 300m
Maximum output torque 18kn.m
Active drilling pipe 108*108*12mm
Drilling pipe 89mm
Main windlass lifting power 30kn
Assistantwindlass lifting power 20kn
Rotary table latus rectum 500mm
Rotating speed (forward and inversion) 40/70/128r/min
Height of the drilling tower 13m
Gross weight (excluding drill rod) 9t
External dimension 2200*6000*13000mm
Drilling tower Type A / hydraulic drill tower
This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on

1.The features of SPJ-600 water well drilling rig
SPJ-600 water well drilling rig is mainly used for drilling and exploration of hydrology and water wells within 600 meters, which is suitable for soil, rock and gravel layers.
The SPJ-600 water well drilling rigadopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted.
2.The specifications of SPJ-600 water well drilling rig
Drilling depth 600m
Borehole diameter 500mm-2500mm
Rotary table latus rectum 605mm
Active drillingpipe 108*108*12mm
Drilling pipe 89mm
Rotary speed 42/75/134kn.m

Main windlass single rope lifting power 35kn
hook rated load 210kn
hook lifting speed 0.15-0.47m/s
pulley block model 3*3
wire-rope diameter 20-21.5mm
Assistant windlass single rope rated lifting power 15kn
maximum lifting power of a single rope 20kn
single rope rated lifting speed 0.58m/s
wire-rope diameter 9.8mm
Windlass power 37kw
Gross weight (excluding drillingpipe) 11t

1.The features of SPJ-1000 water well drilling rig
is mainly used for drilling and exploration of hydrology and water wells within 1000 meters, which is suitable for soil, rock and gravel layers.
The SPJ-1000 water well drilling rig adopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The drilling rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted.
2.The specifications of SPJ-1000 water well drilling rig
Drilling depth 1000m
Borehole diameter 500mm
Rotary table diameter 1200mm
Rotary table latus rectum 670mm
Rotary table weight 2050kg
Rotary speed 36/60/90/130r/min
Active drilling pipe 133*133*12mm
Drilling pipe 89mm or114mm
Main windlass single rope lifting force 60t
Assistant windlass single rope rated lifting force 30t
Windlass power 45kw

Drilling depth mm 400 Winch lifting force T 1.5
Drilling aperture mm 105-325mm Outrigger travel m 1.5
Working wind pressure MPa 1.2-3.5 Footage efficiency m/min 10-35
Air consumption m3/min 16-55 Walking speed m/min 2.5
Drill pipe length m 6 Gradeability ° 20
Recommended drill pipe diameter mm 89-102 Total Weight T 10
Axial pressure T 4 Dimensions m 6.55�?1.9�?2.75
Lifting force T 22 Adapt to the conditions Unconsolidated formation and bedrock
Advance itinerary m 7 Drilling method Hydraulic rotary and propulsion, down-the-hole hammer drilling
Fast rising speed M/min 28 Equipped with impactor Medium and high pressure series impactor
Fast forward speed M/min 55 Advance axial pressure, anti-axial pressure adjustable
Maximum Swing Torque Nm 8000/4000 Engine KW Yuchai Engine
Maximum rotation speed r/min 75/150 Engine speed r/min 1600-1800