Cement Spacer Maker

Advantage for cement spacer block maker:
1.No need pallet
2.Hydraulic stripping
3.Mobile brick machine
4.Smaller volume, higher output
5.Lower energy consumption, high efficiency
6.High quality steel, long service life time
Good after sale service

Product Description
The household small cement brick making machine is manually used, and it is relatively simple to control each movement by using a rod, and there is no requirement for the education and physical strength of the user;
It has a simple structure, a relatively small shape, and can be moved according to the site; it adopts 220v voltage, which has relatively low energy consumption and low cost of produced bricks.



Custom processing: Yes
Molding cycle: 5S
Transmission mode: 4506 (times/min)
Exciting frequency: 42
Maximum pressure: 4.6t
Whole machine weight: 560kg
Vibration frequency: 4600 (hz)
Working pressure: 10-22 (Mpa)
Dimensions: 5003 1603 2303
Installed capacity: 38
Forming pressure: 222
Main vibration form: hydraulic
Total power: 42kw
Alias: Mobile Cement Mortar Brick Making Machine
Uses: Cement bricks



Its parts are all mechanical parts, and there will be no damage during the production process, the failure rate is low, and the maintenance cost is reduced; the cost of the small household cement brick machine is relatively low, and it is a popular brick machine equipment.



Specific steps are as follows:
1. Pull open the upper mold of the household small cement brick machine;
2. Add materials to the mold of the small household cement brick making machine, pay attention to the material to be flat;
3. Hold the handle and push the upper mold; pull the small ring and pull it to the right;
4. Turn on the vibration and stop immediately when the left limit is in place;
5. Step on the balance bar below and pull the upper hand lever backwards;
6. Pull the small household cement brick machine out of the brick position, so that the bricks are produced.
Repeat the above steps cyclically to achieve continuous work. When the user can master and control the small brick making machine proficiently, its output will not be lower than other equipment.

Various concrete blocks:
Single Concrete Spacer
Double Concrete Spacer
Concrete Bar Spacer
Heavy Duty Concrete Spacer
Circular Concrete Spacers...

Product Introduction:
concrete spacer block maker can generate less pollution, especially less noise. It can also save energy.
With changing molds, it can not only produce various kinds of concrete spacer blocks but also solid bricks, curb stones and so on.

Multiple cement spacer machine:
Getting the right amount of concrete cover is essential for the durability of reinforced concrete structures. Fibre concrete spacers ensure correct concrete cover before and during concreting. They are characterized by high compressive strength and excellent chemical and physical resistance.

Features of Multiple cement spacer machine::
High-intelligent automatic concrete spacer machine, Easy to produce and manage, is not affected by workers' ideological emotions, works continuously, reduces investment in production management, increases production, effectively reduces cement block cost, and win strong market competitiveness. url:http://www.hnblockmachine.com

The materials needed for Cement Spacers: stone powder, slag, coal gangue, mineral waste residue,
lime sand, fly ash, gravel, tailings, sand, construction waste can be ground and mixed with a small amount of cement!
1.pure pressure integral machinery,The pressure will not be too large to result in the cylinder out of oil cylinder.All of them are new technologies developed by ourselves. We produce our products with the best materials, and we don't have to worry about it just for the sake of reassuring customers in the future.
2. Full automatic feeder, automatic feed,Feeding uniform,fast speed,reduces time and effort,No material leakage.
3.cover block machine hopper: Uniform feeding to the mold. Simple, easy to use and convenient for workers to operate.
4. pan mixer: can lie down below the ground, and the upper lip can be even with the ground, so as to reduce the labor intensity of workers. It is convenient for workers to put materials.
5. Multi-use: Cement Spacers Machine can produce a variety of products by changing molds. Cement products within 100 cm can be produced.

Cement spacer machine introduction:
Special cement spacers machine for specialist requirements. Spacers often need to meet quality requirements and require special properties which are not covered by the standard spacer requirements. We produce custom dimensions and custom forms quickly and efficiently to your specifications so you can always have the correct spacer..

No matter who the production user is, he hopes that the hydraulic cement block spacers machine he invested can produce high-quality cover blocks products. However, he must strictly control the production process and ensure the standardized production process and requirements in order to produce high-strength bricks, win a larger sales market and create higher benefits.

1. The frame adopts the form of three-beam and four-column prestressed tie bar sleeve, which is firm in structure, strong in bearing and smooth in sliding up and down of the working table;

2. The hydraulic system adopts the imported proportional valve, hydraulic variable pump and other components. The pressure and flow of the system can be adjusted continuously according to the actual working conditions.

3. The hydraulic pump adopts sinking type, with highly integrated valve block, compact structure, few external oil routes, simple and clear system layout, greatly reducing oil leakage probability and environmental noise;

Type:Block Making Machine
Brick Raw Material:Concrete/Cement/Sand/Fly Ash/Limestone/Stone
Processing:Brick Production Line
Method:Hydraulic Pressure
Automatic:Yes
Capacity:45000-47000 pcs/8h
Voltage:380V
Power:19.55KW
Dimension(L*W*H):350X220X200cm

Fibre Cement Rebar Spacers machine in the molding process hydraulic cylinder output different strength, cement product appearance size is different.

Therefore, the pressure output of the Fibre Cement Rebar Spacers machine needs to be adjusted.

Pressure adjustment method of Fibre Cement Rebar Spacers machine, pump station adjustment 1. No-load operation for 10-20min. When starting the hydraulic pump of the block machine, loosen the overflow valve or be in the unloading position, so that the system can operate without pressure.

Look at the magnitude of the unloading pressure;