Model Aw2000-02 Aw3000-03 Aw4000-04 Aw4000-06 Aw5000-10
Working medium Air
Pressure range 0.05~0.85mpa
Max working pressure 1.0mpa
Test pressure 1.5mpa
Operating ambient temperature 5-60 degree celsius
Recommended lubricant Iso vg 32 or equivalent
Port size G 1/4 G3/8 G1/2 G3/4 G1
Feature:
1)aluminum alloy material.
2) the vane angle will be 30íp;
3) air register1-4 directions, square or rectangular for choice.
4) can add obd or fliter as your requirement.
5)easy installation and maintenance
6) natural anodized aluminum finish or powder coated
Outer standard size: as per your request(face size=neck size+127mm)
Neck size: a*b(size is as per your request)
Vane space:25~35mm
Height:50mm
Flange width: 62mm
Order notes: item-neck size aíßb-color/(obd/filter or not)
Functions: mutil-angle for air supply or return
Use: for floor, ceiling, wall, sidewall, door, air conditioner application, in broadcast room, hospital, theater, guest room
Packing:normal packing (each diffuser packed with a piece of wrapper, and then put into the carton separated with a cardboard)
compressed air filter
1). Separator filter (HF9)
For bulk liquid removal plus a 3 micron coalescer (5ppm w/w maximum remaining oil content)
Two-stage filtration
* First stage: two stainless steel orifice tubes provide 10 micron mechanical separation
* Second stage: in-depth fiber media captures solid and liquid particles to 3 micron
2). Air line filter (HF7)
For removal of liquid water and oil; removes solid particles to 1 micron (1.0 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two-stage filtration
* Firt stage: captures larger particles with alternate layers of fiber media and media screen
* Second stage: coalesces aerosols and captures solid particles with multiple layers of epoxy bonded, blended fiber media
3). High efficiency oil removal filter (HF5)
For coalescing fine water and oil aerosols; removes solid particles to 0.01 micron (0.01 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* First stage: multiple layers of bonded, blended fiber media for fine coalescence
* Second stage: multiple layers of bonded, blended fiber media for fine coalescence
Outer coated, closed cell foam sleeve
4). Ultra high efficiency oil removal filter (HF3)
For coalescing ultra-fine oil aerosols; removes solid particles to 0.01 micron (0.001 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* First stage: coated, closed cell foam sleeve acts as pre-filter and flow disperser
* Second stage: multiple layers of matrix blended fiber media for ultra-fine coalescence
Outer coated, closed cell foam sleeve
5). Oil vapor removal filter (HF1)
For removal of oil and hydrocarbon vapors normally absorbable by activated carbon; removes solid particles to 0.01 micron (0.003 ppm w/w maximum remaining oil content)
Corrosion resistant inner and outer cores
Two stage filtration
* first stage: stabilized bed of finely divided carbon particles removes the majority of the oil vapor
* Second stage: multiple layers of fiber media with bonded micro fine carbon particles remove the remaining oil vapor
Multiple layers of fine media prevent particle migration
Outer coated, closed cell foam sleeve prevents fiber migration
Designed life is 1000 hours under rated conditions.
