Colibri iMX6ULL is the first Toradex's Computer Module offering on-board Wi-Fi and Bluetooth. The Colibri iMX6ULL is a SODIMM-sized SoM based on NXP i.MX 6ULL application processor, featuring a power-efficient Arm® Cortex-A7 core.
The Colibri iMX7S and Colibri iMX7D are SODIMM sized System on Module that are based on NXP/Freescale i.MX 7Solo and i.MX 7Dual SoCs respectively. Ideal for building connected devices with high performance and frugal power consumption, along with advanced security features.
The Apalis TK1 is a small form-factor System on Module (SoM) based on the powerful NVIDIA Tegra K1 SoC. Ideal for building high-end embedded products in the areas of vision and computing.
NVIDIA Tegra K1
ARM Cortex?¢-A15
Up to 2.2 GHz, Quad Core
2GB DDR3L (64 Bit)
16GB eMMC (8 Bit)
-25° to 85° C Temp
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply
Product Introductionï¼?
SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger.
Unique function
High efficiency over the full load range, full load efficiency greater than 95%
Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery
5-inch LCD touch screen, easy to operate
Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate
Main featuresï¼?
Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc.
Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments
Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs.
Dual DSP design, achieve the full digital control, less components means high reliability
Wide input voltage range, allows operation in most poor grid conditions
Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system
Input, output have protective circuit breaker switch
Module adopts hot pluggable design, which is convenient for maintenance.
RS485 interface (Optional)
Quantity available: 1
Warranty: 12 months.
Lead time: 1-2 working days.
Terms of payment:T/T and Western Union.
Courier partners: DHL, UPS, TNT, FedEx and EMS.
Technical specification, manuals and data sheets
System power monitor module SY4200 for turbines
Main: hydraulic machinery and components, hydroelectric generating units; coal-fired generating units; generating units; electrical and electronic products processing; mechanical parts processing. Mainly engaged in the power industry host (steam turbine, water machine, boiler, turbine) accessories, spare parts, spare parts, auxiliary equipment and environmental protection equipment. Deyang YOYIK supply power plant, steel accessories are as follows:
Yoyik can offer many spare parts for power plants as below:
#DF-System power monitor module SY4200 for turbines-DF
temperature sensor pt100 3 wire WZP2-001
Conductivity Transmitter 8225
Eddy Current Sensor PR6422/001-101
Sensor DF310880-50-03-02
LVDT sensor 5000td-xc3
LVDT Sensor ZD-1000TDB
Sensor Proximity Turbin TM0702-05
Eddy Current Sensor PR6423/002-121
Flow measuring device FWZ-1100-D3
Electric heating rod ZJ-20-1R
linear encoder absolute TDZ-1E-011
fuse switch disconnector XRNT1-7.2-160A
ELECTRICAL LINEAR VARIABLE DIFFERENTIAL TRANSFORMER DET-500B
range of lvdt LVDT TDZ-1-H 0-60
micropulse linear transducer DET-1000B
Pressure Switch 107AL-N12-P1-F1A-TTPKXX373
Eddy Current Sensor PR6424/004-011
Eddy Current Signal Converter CON031/913-030
Bolt electric heating rod ZJ-20-6
Network Switch EKI-2528
SWITCH PRESSURE 414850-FD050
Flow indicator LZG15-20
low rpm tachometer WZ-3C
Magnetic Fow Meter DE43F/WT4300E DN700
Probe 21747-080-0
AMMETER 6C2-A
Preamplifier 330106-05-30-10-02-00
Pull cord sensor XD-TA-E
linear position transmitter TDZ-1E-43 0-135
Connector 4-Pin P28K2S
FTV Camera YF-A18-5A-2-0(B)
Eddy Current Sensor PR6424/001-121
speed sensor G-065-08-01
APPROORIATIVE POWER SUPPLY GJCT-15-E
Differential indicator DVM20VP01
Braun Card D421.51U1
System power monitor module SY4200 for turbines
