Factory-assembled RTR large scale gas buggy
Fully functional modular polymer roll cage
Custom, pre-painted polycarbonate body panels
Heavy duty 24mm front hex hubs
Super HD driveshafts
Single piece rear hub
TF-45 2.4GHz FHSS radio system with failsafe
Powerful pull start 26cc 2-stroke engine
4mm Aluminum monocoque chassis
700cc fuel tank for up to 45 minute runs
High flow tuned muffler
Sand rail fitted with off-road tires
TSK-b Class 1 buggy fitted with HB Rodeo SC tires
6V, 3000mAh receiver pack with wall charger
Big bore shocks with 6mm diameter shafts
8000 RPM performance clutch
Full ball bearings
Specifications:
Chassis: 0.16" (4mm) pressed aluminum channel monocoque design with modular polymer roll cage
Drive: Two wheel, steel dogbones with rubber boots, super heavy duty driveshafts, one-piece rear hub for increased durability
Differential: Metal gear
Engine: HPI fuelie K26 2-stroke gasoline engine with pull starter
Muffler: High-flow tuned
Fuel Tank: 24oz (700cc)
Radio: 3-ch HPI TF-45 2.4GHz FHSS radio system with failsafe
Servos: SFL-11MG metal gear servo 347 in/oz torque @ 6V, speed, 0.17 seconds/60°, SF-20W throttle servo
Body: Pre-painted custom polycarbonate body panels
Shocks: Big Bore valve variable control with 6mm diameter shafts
Receiver Pack: 6V 3000mAh NiMH
Ball Bearings: Full set
Wheels: Front 4.7 x 2.4" (119 x 61mm), rear 4.7 x 3" (119 x 76mm) with beadlock mount
Tires: HB Rodeo SC
Wheelbase: 22.5" (571mm)
Ground Clearance: 2.4" (61mm)
Baja 5T-1 Truck Body
VVC/HD Shock Set
Outlaw Truck Wheels
High Flow Muffler
Anodized Aluminium Parts
Front & Rear Sway Bars
Modified Rear Shock Tower Brace
Double Wishbone Suspension
SFL-11MG Metal Gear Steering Servo
Heavy Duty Beadlock Wheels
Moulded Rear Spoiler
Heavy Duty Rear Dogbones
Disc Brake System
Full Ball Bearings
8000 RPM Clutch
Aluminium Alloy Diff Case
Extended Roll Cage
Includes:
Pre-Assembled 1/5th scale 2WD truck with Fuelie 26cc gasoline engine
2.4GHz radio set and SFL-11MG servo
(4) "AA" Batteries (for Transmitter)
6.0V 3000mAh Receiver Pack
Multi region Battery Charger
1.Car body material is zinc alloy.
2. 4 car doors can be opened.
3. Engine cover can be opened, and the components of the engine can be seen inside.
4. The boot cover can be opened.
5. The tyre behind can be seen obviously.
6. The second line chairs can be folded onwards.
7. Back mirror can be folded.
8. Internal clerestory plate can be pulled.
9. Steering wheel will drive the front wheels.
10. The oil box cover can be opened.
11. The decoration in side has emulational carpet, instruments and control board.
12. The driver seat can move forward and backward.
13. The car is vibration-proof.
1, Displacement 29cc 4 bolt engine with china local engine spark and carb.)2, LxWxH: 795x480x300mm3,Tread:395mm(F)/400mm®4,Wheelbase(F/R):475mm5,Rear wheel drive6,Rear axle Brake7,18KG full metal gear throttle servo8,45KG metal gear steering servo9,Dominator pipe10, Metal diff. gear set11,Full terrain tyres sets12,6mm shocks13,SC6V2000µA battery14,2.4G 3 channel controller without LCD screen15,8000rmp clutch 16,New suspension A arm set Gen.217,new ratio can18,Tail Wheel19,Renewable 9mm half shaft20,CNC rear absorber brace bar21,CNC alloy shell front support22,symmetrical steering set
Rovan Baja 5TS 360 injection car shell 36CC petrol carScale 1:51, Displacement 36cc four bolt engine(with NGK and walbro carb.1107),single cylinder,two stroke,air-cooled2,LxWxH:817x480x255mm3,Tread:395mm(F)/400mm®4,Wheelbase(F/R):570mm5,Rear wheel drive6,Rear shaft Brake7,18KG full metal gear throttle servo8,55KG metal gear steering servo9,dominator pipe (Gen.2)10, Metal diff. gear set11,Gen.3 knobby tyres set with Gen.4 wheel hubs and nylon beadlocks12,CNC 8mm metal absorber13,SC6V4500 Battery14,RC4G 2.4G 4 channel controller with LCD screen15,8000RMP new clutch kit16,High strength nylon front&rear suspension set17,New ratio can18,Front & rear lean prevention set 199MM half shaft19,Alu.metal clutch tripod21,metal roll cage22,New symmetric steering kit23,Attached with service kit bag24,New incorporated Hex.clutch bell kits25,CNC front absorber supporting tower(also fit for 5T or 5SC truck)26,CNC alloy F&R thicker board27,CNC alloy rear absorber brace rod28,CNC alloy rear shock support and bar set29,new anti-leaking fuel tankScale 1:51,Displacement 45cc four bolt engine(with NGK and walbro carb.1107),single cylinder,two stroke,air-cooled2,LxWxH:817x480x255mm3,Tread:395mm(F)/400mm®4,Wheelbase(F/R):570mm5,Rear wheel drive6,Rear shaft Brake7,20KG full metal gear throttle servo with CNC servo arm8,65KG metal gear steering servo with CNC servo arm9double exhaust pipe with muffler( including metal rear bumper)10, Metal diff. gear set11,full terrain tyres set with nylon beadlocks12,CNC 8mm metal absorber137.4V-5C 4200amh battery14,RC4G 2.4G 4 channel controller with LCD screen15,8000RMP new clutch kit16,Front & rear lean prevention set 17new strengthen 9mm half shaft18,Alu.metal clutch tripod19 metal roll cage20,New symmetric steering kit with CNC alloy drag link21,Attached with service kit bag22,New ratio can23,New incorporated Hex.clutch bell kits24,CNC alloy front & rear suspension arm set25,CNC front absorber supporting tower(also fit for 5T or 5SC truck)26,CNC alloy F&R thicker board27,CNC alloy rear absorber brace rod28,CNC alloy rear shock support and bar set29,CNC alloy ball connector30,CNC alloy rear wheel bearing carrier31,Rear LED light with CNC alloy rear foundation32,Front LED light33,new anti-leaking fuel tank34,Metal sealed wheet nutsThe 5TS360 is a combination of the Baja5T and SC essences. It also absorbs the LT's roll cage and the car casing, making the roll cage and the car body of the whole car one-piece, making it easier to assemble and disassemble.The front of the car has a huge front elevation buffer cover, and the lamp can be fitted with LED bead
