Compression Testing Machine

Compression testing machine used for testing the strenght of cement and concrete

900mm * 500 mm, 200 kg

The pressure testing machine is mainly used to measure the compressive strength of building materials such as brick, stone and concrete.

Characteristic:

1. Electric and hydraulic load manually, sensor measure the force.

2. The screen display loading speed, breaking peak value, data storage, printing,inquiry and compression strength conversion.

1.Applications ans features-torsion testing machine
? This impact testing machine combines low temperature test and impact test in one machine.
? Adopts auto sample feeding device so that sample will be sent to do impact test once low temperature test is finished. This is done within 4 seconds to improve test precision and working efficiency.
? All the procudures (sample cooling, temperature holding, temperature adjust, raise pendulum, locate pendulum, sample sending, sample locating and impact) are electric auto control
? After breakage of sample, pendulum will raise with rest energy to prepare for the next test. Its super performance is suitable to the lab doing continuous low temperature impact test and to the metallurgy and engineering works doing large number of low temperature test.
? Test method: ASTM E23, EN 10045, ISO 148, ISO 83, etc.
2.Main specifications-torsion testing machine
1 Impact engergy 150J 300J
2 Pendulum pre-raising angle 150°
3 Distance between pendulum center to impact point(sample center) 750mm
4 Impact speed 5.2m/s
5 Span of impact specimen support 40mm
6 round corner of nipper jaw R(1.0-1.5)mm
7 round corner of impacting edge R(2.0-2.5)mm
8 impact knife thickness 16mm
9 cooling mode liquid nitrogen refrigeration
10 Sample box capacity 10 pcs
11 Temperature range room tempeature- minus 196? ( the temperature can arbitrarily set in the range of temperature)
12 temperatuer precision fluctuation±1.5? graded 2?
13 Specimen size 10X10X55mm
14 Dimension 2230X1510X1480mm
15 Overall weight 850kg
16 Power and voltage three-phase four-wire system 380V 50Hz 750W

1.Applications ans features-torsion testing machine
The machine is used to test the anti-impact properties under dynamic load for metal materials. It can be used for metallurgical mechanical manufacturing industry and scientific research departments.
This machine adopts PC computer control, electrically raising pendulum and impact, computer measurement, calculation, screen display results and can print results, with high efficiency and accuracy.
After impact to specimen, it can automatically raise pendulum with the left energy and make preparations for the next test, easy to operate, efficiently.
It is especially applicable to the metallugical and mechanical industries which usually need to make plenty of impact tests.
The PC can display impact absorption energy, impact toughness, pendulum rising angle and average value and can print test data and average value, satisfying Metallic Materials-Charpy Impact Test Method.
2.Main specifications-torsion testing machine
1 Impact engergy 150J 300J
5 Pendulum pre-raising angle 150°
6 Distance between pendulum center to impact point(sample center) 750mm
7 Impact speed 5.2m/s
8 Span of impact specimen support 40mm
9 round corner of nipper jaw R(1.0-1.5)mm
10 round corner of impacting edge R(2.0-2.5)mm
12 impact knife thickness 16mm
15 Specimen size 10X10X55mm
16 Dimension 1500X850X1340mm
17 Weight 850kg
18 Power and voltage three-phase four-wire system 380V 50Hz

1.Applications ans features-torsion testing machine
? Mainly used to test the capacity of impact resistance under dynamic load for metallic materials,in order to determine the property of the materials under the dynamic load.
? Automatically swing with remaining erengy after impact test, easy to operate, highly effective, reliably, especially suitable for laboratory with successive impact tests and metallurgical and mechanical manufacture industries with lots of impact tests.
2.Main specifications-torsion testing machine
1 Impact engergy 500J 150J
2 Pendulum pre-raising angle 150°
3 Distance between pendulum center to impact point(sample center) 800mm
4 Impact speed 5.4m/s
5 Span of impact specimen support 40mm
6 round corner of nipper jaw R(1.0-1.5)mm
7 round corner of impacting edge R(2.0-2.5)mm
8 impact knife thickness 16mm
9 Specimen size 10X10X55mm
10 Dimension 2230X640X1480mm
11 Weight 520kg
12 Power and voltage three-phase four-wire system 380V 50Hz