Please click here to check who's online and chat with them.

Flammability Test Equipment For Bundled Cables

Supplier From China
Mar-11-19

1. Application

It is used to evaluate the ability of vertically installed bundle wires or cables to suppress flame vertical spread under specified conditions. This equipment is widely used in wire and cable industry, colleges and universities and commodity inspection departments.

The experimental device is a self-supporting box with length of (1000±100) mm, width of (2000±100) mm and height of (4000±100) mm. The bottom of the box is above the ground. The circumference of the test box is sealed, and the air flows into the box from an inlet of (800±20) mm x (400±10) mm, Open a vent (300±30) mm x (1000±100) mm at the rear of the top of the box. Thermal insulation with heat transfer coefficient of 0.7Wm2K1 is adopted on the back wall and both sides of the test box. The distance between the steel ladder and the back wall of the test box is 150 mm, the lowest transverse gear of the steel ladder is (400±5) mm from the ground, and the lowest part of the cable sample is about 100 mm from the ground.


2. Standards

This bundle cable burning tester is manufactured in strict accordance with GB/T 18380.31-2008 and other standards.


3. Main Technical Parameters

(1) Shape (overall space) size: 3200mm (long) *2500mm (wide) *4500mm (high).

(2) Air Source: The air inlet is equipped with a digital anemometer which can measure the air velocity. The air flow rate is (5000±500) L/min.

(3) Steel ladder type: wide (500±5) mm standard steel ladder, wide (800±10) mm wide steel ladder.

(4) The size of the air inlet at the bottom of the combustion chamber is (800±20) x (400±10) (mm).

(5) Ignition Source: two belt propane gas burner and its matching flowmeter and Venturi mixer. The fire surface should be a flat metal plate drilled with 242 holes of 1.32 mm in diameter. The holes are arranged in three rows with the center distance of 3.2 mm. Each row is 81, 80 and 81, respectively, and distributed in the nominal size of 257 x 4.5 mm. In addition, a small number of holes are arranged on both sides of the flamethrower, which can maintain stable combustion of the flame. Each burner uses a rotator to control the flow rate of propane and air.

(6) Ignition source position: Spray lamp is placed horizontally, away from the front surface of cable sample. The burning point of the spray lamp is located in the center between the two transverse gears of the steel ladder and is at least 500 mm from the lower end of the specimen. The spray lamp is installed on the trolley.

(7) Combustion Gas: propane with a purity of 95%. (user provided)

(8) Combustion Supporting Gas: compressed air.

(9) Air Flow: 20~150L/min adjustable, equipped with pressure gauge and regulating valve.

(10) Propane Flow Rate: 2~20L/min (flowmeter is rotator flowmeter); equipped with pressure gauge and regulating valve.

(11) Power Supply: AC380V, 50HZ; total power is 5KW.

Price and Minimum Quantity

Price: $20000
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Flammability Test Equipment For Bundled Cables

GOLD Member
VERIFIED
Aug-08-08
Supplier From Shanghai, China, China
GOLD Member
May-18-01
Buyer From Bengaluru, Karnataka, India
GOLD Member
VERIFIED
Oct-21-16
Buyer From Faridabad, Haryana, India
GOLD Member
Sep-21-10
Supplier From Karachi, Sindh, Pakistan
GOLD Member
Mar-16-19
Supplier From Gandhidham, Gujarat, India
GOLD Member
VERIFIED
Mar-19-20
Supplier From Bangalore, Karnataka, India
GOLD Member
VERIFIED
Nov-09-21
Supplier From Ha Noi, Cau Giay, Viet Nam
GOLD Member
Feb-02-18
 
Commodity: Sodium Hydrosulfite
Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate
CAS No.: 7775-14-6
Molecular Weight: 174.10
Chemical Formula: Na2S2O4

Product Description
Appearance: White, crystalline powder.

Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.

Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.

Packaging 50kg/100kg net in iron drums with double PVC bags

Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
GOLD Member
Feb-02-18
 
Commodity: Sodium Bisulfite
Molecular Formula: NaHSO3
Molecular Weight: 104.06

Properties: White monoclinic crystalline powder with sulfur dioxide odor; relative density: 1.49; very easily soluble in water; can be decomposed when heated; slightly soluble in ethanol; aqueous solution is acidic; has strong reducing property; can be oxidized in the air or loose sulfur dioxide.

Quality Standard: HG/T3492-80
Technical Indicator High-purity grade Acrylic grade Food grade Refined grade Industrial grade 1
NaHSO3 % 99.5
Insol. in water % 0.003, 0.005, 0.03, 0.04, 0.05
Chloride(Cl) % 0.003, 0.004
Iron(Fe) % 0.001 0.002 0.005
Heavy metal(Pb) 0.001
Arsenic(As) % 0.0001
Clarity test Qualified

Use: It is used in the bleaching of cotton textiles; as reducing agent in dyes, paper-making, leather, chemical synthesis; in the manufacture of pharmaceutical intermediates, developer, food bleacher, antiseptic and anti-oxidants.

Packing: In PP woven bag lined with PE bag; paper-plastic composite bag, and kraft paper bag etc.

Net wt.: 25/50/1000 kgs/bag or upon clients' request.

Verification Status