Rail Flat Trolley

Brief Introduction Of Motorized Rail Flat Trolley

About this series motorized rail flat trolley, it is an electric transfer flat trolley running on rails which is powered by dragging cable. It conducts AC 380v directly into the electrical control system of the motorized rail flat trolley to let it start, stop, go forward and backward and so on. The dragging cable is laid on the ground. The cable line is place between the tow rails. The operated system is low voltage 36v power. The hydraulic lifting device can be installed on the motorized rail flat trolley.


Features Of Motorized Rail Flat Trolley

Compared with KPX(battery power) series trolley, the using time of motorized rail flat trolley is unlimited.

Compare with KPD(conductor rails power) series trolley, the motorized rail flat trolley have no strict requirement on the rails.

Compared with KPJ(cable reels power) trolley, the cost of the motorized rail flat trolley is lower.



Advantages Of Motorized Rail Flat Trolley

This series motorized rail flat trolley is suitable to be used in the bad environment, for example, high-tempeture and anti-explosion condition;

AC motor, simple structure, not limited for the using time;

It has no strict requirement on the rail's installation;

Cost is not high, easy to operate and maintenance;

The motorized rail flat trolley is customized as per your true demand.

Product Introduce

About the trackless electric flat trolley, it is an electric transfer trolley without rail. These trackless electric flat trolley have been conceived and built for their utmost working flexibility. Since they have no predefined path and can steer in any direction and move on any kind of floor these trolleys are very useful to bring the heavy loads where overhead cranes cannot arrive.

This kind of trackless electric flat trolley represent the best solution for all those appliances with delicate handling problems in limited places.

These trackless electric flat trolley can be controlled by a pendant push button panel or a remote controller, depends on the speed requested by the customer.


Advantages

1. It can realize double way moving and 360 degree turning.
2. Short braking distance and minimum turning radius, fitted with safety guard and alarm system which make sure the trackless electric flat trolley can always be safely operated.
3. No damage to the ground surface painting.
4. The biggest advantage is free movement with turning and advancing as you like.
5. No track constraint.
6. No railway construction limit and maintenance trouble.

In order to meet the requirement of high performance for internal logistics in shipbuilding and marine engineering industry, tolian specially developed flat tyre trolley for ship block and other heavy material of thousands of tons

Product Introduce

The electric flat transfer trolley, it is an electric transfer trolley running on rails. The battery is installed in the electric flat transfer trolley. The batteries supplied the electricity to the DC motor through the electrical control system. Use this principle, to make the electric flat transfer trolley start, stop, go forward, backward, adjust the speed and so on. Due to its power supply, it get rid of the limitation of cable, and has no strict requirement for the rails. The kinds of electric flat transfer trolley can be operated via remote control, which makes it more convenient and safer.

Characters

Power from storage battery;

Capacity load from 1t to 500t;

Side support to avoid falling off;

DC motor;

Running speed 0-20 m/min;

No limit of running distance;

Service of drawing draft, installation drawing and free engineer service;

Two car can be operated together at a same speed;

Remote controller.

Working principle for rail transfer trolley

KPC series rail transfer trolley is that the safe sliding wire is set in a channel ditched beside the rail, and also can be set on the ground along the wall. It contacts AC 380V sliding wire directly into the AC electrical control system of the rail transfer trolley to let in start, stop, go forward and backward and so on. The rail transfer trolley gets power from the slider of the safe sliding line which is moved by the rail transfer trolley's running.

Application of rail transfer trolley

The rail transfer tolley is suitable for various industries, steel mill, transfer steel products such as steel structure, steel pipe, steel billets, steel ladle and coil, etc. Paper roll plant: transfer paper coil, painting shops, transfer workpiece into the painting room, sand blasting room. Other industries: shipbuilding, quarries, warehouses and multi-bay workshops, etc.

Products Description

The kinds of electric transfer rail trolley, which is powered by conductor railway. It makes the AC electricity power is transformed into AC 36v three-phase and are respectively connected to the three rails. Then the electric transfer rail trolley conduct the AC 36v on rail into the electrical appliance box at the bottom of the trolley. And then the AC 36v is transformed into DC 36v to control the DC motor. Use this principle to make the electric transfer rail trolley start, stop, go forward and backward and adjust the speed and so on.

Products Introduce

The kind of workshop rail handling trolley, which lead AC380v to the workshop rail handling trolley as the power source. You can put the sliding wire in the hole, if your workshop rail handling trolley approaches to the wall, the sliding wire also can be fixed on the wall ,what we do not only can save the space but could reduce the impair for the ground. Of course, it can be customized according to your requirement. Due to its low cost, high frequency, simple structure, it is the first choice for the factory which has been widely used in industry field.

Cast Steel Wheel

About the rail wheel of workshop rail handling trolley, it is single rim of corner case, the material is ZG55, or can be customized as per your demand. It can improve the load capacity and install easily. And the wheel are manufactured and assemblied by ourselves.

Three-in-one Type Reducer, Motor and Brake

This type gear box with advantage of high efficiency, operate steadily, easy installation and maintenance, etc.

Brake is composed by brake frame, brake parts, brake operating device and so on, it is a safety device to ensure vehicle working safely. The electric motor is AC motor.

Sliding Wire

The sliding wire is limited by the position, it can be installed between the two rails. The hole should be digged or it can also be placed in the channel outside the track. In order to the safety and convenience, the border should be added on the channel.

Sound & Light Alarm
For safe running, it is installed on the trolley, it will ring continuously to warn someones when the workshop rail handling trolley start running. Of course, the other parts can be installed, as dead man stop, emergency stop, anti-colliding switch... all can be meet only you'd like by our professional team.

Product introduction for rail electric trolleyThe rail electric trolley generally including frame, travelling wheel, drive mechanism, power supply system, electric control system, operating system and other parts as client requirements. It also can add ladle device, lifting device, V-type support, weight device, display screen, traction device, according to client demands.Parts introduction for rail electric trolleyFrame: Generally adopts steel plate welding box beam structure, this kind of structure has advantage of light weight, strong bearing capacity, the vehicle structure is easy to install.Travelling wheel: Travelling wheel is directly using the crane rail wheel.Drive mechanism: Generally use F series parallel shaft helical gear reducer, K series of spiral bevel gear reducer, LD structure, planetary gear reducer, etc. Drive motor is based on the power supply.Power supply system: Power supply mode is divided into battery power supply, low voltage power supply, sliding contact line, cable drum power supply and towing cable power supply, etc. Electrical control system is also related to the power supply mode.Operating system: There are cable handle control and wireless remote control operation two models. Processing of rail electric trolley Safety operation Notes of rail electric trolley1.Rail electric trolley must have a professional personnel operation and maintenance.2.Before work, operator must check whether there is any obstacle on rails, electrical circuits and control switch is safe and reliable.3. Rail electric trolley must ring down to a smooth start, and note any abnormal situation around, ready for the parking at any time.4. During operation of the rail electric trolley should slow, forbidden to fast change direction.5. Banned for maintenance and cleaning the trolley when working.6. It cannot allowed to overloading.7.In case of sudden power off, it should turn the control switch to zero, after complete the work, must cut off power supply.

-

Brief Introduction for automatic rail flat car

The automatic rail flat car designed for transporting heavy cargoes or equipment from one bay to another in factory. It can be used indoor or outdoor. Our automatic rail flat car model main contains BWP, KPD, KPC, KPJ, KPT and KPX. If you are unsure as to what type of transport car will best serve your needs. Spending a few minutes now, discussing the needs of your application could save you dollars in the future. According to your business needs, we will provides you with the most professional products.our products are found in all sectors, with excellent craftsmanship and technical team, so we produce transfer cart applications in various industries have been widely used.
Safety features of automatic rail flat car

1. Limit switch.

2. Overload stop device.

3. Long bearing buffer.

4. Power failure backup.