YUKEN - HPV32M SERIES - HIGH PRESSURE DOUBLE VANE PUMPS
These double pumps consist of two HPV2 series single pumps combined in tandem within a single housing and driven by a common shaft. Fluid delivered from the two-separate ports can be either supplied to separate or common circuits. These HPV pumps are designed for high-pressure functions. Suitable for mobile applications like Drill rigs, Railways & Construction Equipments.
Yuken Double Vane Pump HPV22M Series Model:
Yuken Double Vane Pump HPV22M Series HPV22M
Yuken Double Vane Pump HPV22M Series CHPV22M
Yuken Double Vane Pump HPV22M Series HPV32M
Yuken Double Vane Pump HPV22M Series CHPV32M
We manufacture a wide selection of cartridge kits for hydraulic systems including Vickers V/ VQ, Denison T6,T7, SQP and Yuken PV2R series hydraulic pumps. For Vickers Vane Pump, We offer replacement cartridge pumps for 20V, 25V, 35V, 45V, 2520V, 3520V, 3525V,4520V,4525V, 4535V hydraulic pumps. Our cartridge kits are designed under the same exact specifications as the Vickers brand cartridge kits to ensure a perfect fit every time at a fraction of the cost of brand-name parts. You can save time and money if you buy these replacement hydraulic cartridge kits from our factory.
Please notes,this link contains:
Catperpillar spare parts 6E3651 shaft
If need other type,please contact us or looking for our store,thanks.
Search your Vickers part numbers to find the correct replacement pump cartridges for your hydraulic system.
We manufacture a wide selection of cartridge kits for hydraulic systems such as Vickers V / VQ, denson T6, T7 series hydraulic pumps, SQP and Yuken PV2R. For the Vickers vane pump, we offer replacement cartridge pumps for 20 V, 25 V, 35 V, 45 V 2520 V 3520 V 3525 V 4520 V 4525 V 4535 V hydraulic pump. Our cartridge kits are designed under the same Exact specifications that Vickers brand cartridge kits to ensure a perfect fit every time at a fraction of the cost of branded parts. You can save time and money if you buy these replacement hydraulic cartridge kits from our factory.
Note that this link contains:
Cat 6E4719 ... V10-4 Cartridge kits
If you need another type, contact us or look for our store, thanks.
Search Vickers part numbers to find the right replacement pump cartridges for your hydraulic system.
Function & assemble parts
1. Modularize group production line: base on dk8/10/12working-table vibration and mould vibration series block making machines as the main machine. We can form production line with single main machine or two main machines. Besides, we also can form production line by different types of main machines to satisfy different scale of investment. Different productionf+s performance specification request, the height from 50mm to 250mm, and the work area is 1280*880mm, production cycle from 15 to 25 seconds.
2. Adopt advanced technology from abroad, combine with ten years experiences, developing and innovating.
3. Advanced performance, widely used, steady and reliable quality, convenient to operate and maintain.
4. The completely production line adopts intelligentize integration system to control, through cc-link network or center assemble line to transmit data, monitor and control every part with quick, accuracy, real time characteristic, fault alam, can finish telenet visit, make the manufacture factoryf+s easy to adjust program, set the parameter, amend and upgrade system.
5. Mostly main part components and element all adopt the international famous brand, such as nsk bearing, japanese yuken brand turning valve.Mitsubishi plv and transducer, omron sensor. So guarantee the dependability and stability of the whole production line to operate continuously with two shift one day.
Technical data
1. Height of curing room: 5700mm
2. Workshop standard height:8000mm
3. Equipment max.Height:5600mm
4. Installation area of equipment:approx600+o
5. Area of curing room: approx700+o
6. Working area of whole production line:1300+o (xclude material yard and block yard)
7. Power: 160-180(kw)
8. Total weight:120-130(t)
9. Annual output(two shifts):80000-180000m3
Ra12.5 Resin Sand Casting Grey Cast Iron Casting For Hydraulic Valve Body Valve Casting
Description
Out factory locates in Ningbo, three hour to Shanghai by highway train.
The factory covers an area of 25,000 cbm with a production capacity 15,000 ton every year.
Our factory is manufacturing the high grade hydraulic castings of valves, pump, motor, high pressure filter, high speed transmission and automotive parts.
The casting material ranges from HT250-HT350, QT400-18~QT700-2, RuT260-RuT420 to alloy steel casting.
We have the following series:
Rexoth casting
Yuken casting
Unitted casting
Mutiple directional valve casting
High pressure filter casting
Engineering mechanical casting
Hydraulic motor casting
Auto parts casting
Products Details
Castings for the hydraulics industry include:
Castings for hydraulic valves
Materials: Grey Iron.
Using sand coated shell casting process, including multiple directional control valve, hydraulic directional valve, and so on.
Casting Process Resin Sand Casting, Shell mold casting,
Casting Material Grey Iron
Processing Methods As following sheet
Casting Weight 0.5kg-300kg
Casting Standard ISO, ASTM, AISI, EN, DIN, NF, JIS, BS, etc.
Casting Tolerance CT6-CT11
Surface Roughness Ra 1.6um-25um
Surface Preparation Polishing, Sand Blasting, Plating, Paint, Powder Coating, etc.
Heat Treatment Quenching, Normalizing, Tempering, Annealing, etc.
Inspection Equipment Spectrograph, Metallographic analyzes, Universal Strength Tester, Hardness Tester, Endoscope, Impact Test Machine, Pressure Testing Machine, Magnetic Particle Inspection Machine, Ultrasonic Flaw Detector, X-Ray Test.
Dimension Inspection Calipers, Height Gauge, Micrometer Calipers, Inside Caliper Gauge, Angle and R Gauge, Coordinate Measuring Machine (CMM).
Ra12.5 Resin Sand Casting Grey Cast Iron Casting For Hydraulic Valve Body Valve Casting
Service & Advantages
We offer One-stop OEM and ODM service of steel, iron and Steel casting parts, focus on the market of Europe, America and Asia. We seek to be customers driven, continuous improvement quality and price to increase return on investment, provide more service in customer experience and the best way to get the job done.
Ra12.5 Resin Sand Casting Grey Cast Iron Casting For Hydraulic Valve Body Valve Casting
Packing
Ra12.5 Resin Sand Casting Grey Cast Iron Casting For Hydraulic Valve Body Valve Casting
Why Choose Us
1. OEM service:
No agents, no trading company, reduce all necessary cost for you. Direct communication with our engineer.
2. Professional team:
20 years foreign customers service experience. Over 10 years investment casting manufacture.
Almost 35% high educated people.
Introduction
APEC Brand AIW series Hydraulic Ironworker is widely used in steel structure, high voltage tower, telecommunication tower, large rigid frame bridge, military and air craft and other metal fabricating industries. It also can be used in vocational school for teaching purpose.
APEC Brand AIW series Ironworker features multiple functions, including: punching all kinds of holes (round hole, square hole, oblong hole), louver punching, steel plate punching, flat bar punching, angle steel punching, C-channel punching, H-beam punching, I-beam punching, profile steel shearing (channel shearing, I-beam shearing, round/square bar shearing, flat bar shearing, T-bar shearing, steel plate shearing, angle steel shearing), notching, press brake, angle steel notching , bending, pipe notching. It comes standard with: quick-change coupling nut & sleeve, squaring arm with scale, electronic back gauge, gauging table with stops, punching base table, safety guards and more.We can design any special tools according to your metal fabricating requirements.
APEC Brand AIW-E series is improved machine on the base of standard AIW series. It goes along with automatic holding system and temperature cooling system.
Automatic Holding System: There is automatic holding system in angle steel shearing and plate shearing work position. The holders will fix the position of work-piece, in this way, the accuracy is better and more safety for workers meanwhile save time and Improve working efficiency.
Temperature cooling system:Through the temperature monitoring screen you can read the temperature of oil, 55 degree is our default configuration, once the machine is working, oil temperature goes higher than 55 degree, the cooling system inside will run automatically to decrease temperature in order to protect machine.
APEC Brand AIW-L series is improved machine on the base of standard AIW-E series. It also goes along with automatic holding system and temperature cooling system. At the same times, punching position and shearing position can work synchronously.
Features
1. High Quality Components & System
a. Main Electrical component: Schneider, Germany.
b. Valve: Yuken, Japan
c. Pump: Atos, Italy
d. Oil Seals: NOK, Japan
e. Timer Relay: OMRON, Japan
f. Wiring Terminal Block:WEIDMULLER, Germany
g. Motor: Weiteli, China
2. Cost Effective
AIW SERIES Hydraulic Ironworker With Very good price/performance ratio
Various AIW SERIES Hydraulic Ironworker capacity from 45T to 400T to meet your requirement.
3. Stable Performance & Reliable Quality
AIW Series Hydraulic Ironworker use hydraulic transmission. Light weight, low noise, reliable performance.
4. Simple Operation
The operation of hydraulic ironworker is controlled by foot switch.
Technical Parameters:
Accessories:
a. A pair of round hole punching die
b. A set of angle steel blade
c. A set of square and round bar blade
d. A set of shearing plate blade
e. A set of notching blade
The above punching and moulds will be installed in the machine.
For other dies and blades, customers need to order
Installation & Operation Training
APEC will provide you 1-7 day installation and operating training in our factory.
Training After-sales service
1. Technical documents
All labels on machines and lay-out drawings, Electrical diagram, Operation Manual, will be in English. The seller should send all necessary files to the buyer since the third week since project execution. All documents in hard copies should be also shipped with machines together.
2. Arrangement for inspection, installation and testing work
a. After all machines are delivered to customer¡¯s factory; Buyer is responsible for all preparation work, e.g. electricity supply, water supply, labors and cranes, etc.
b. The buyer will prepare for visa application for their engineers, who are responsible for guide of machine installation and testing at the Buyer¡¯s factory.
c. The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 per day for each engineer.
d. Engineer will give free training lessons to labors in buyer¡¯s factory.
3. Quantity and quality guarantee
a.Quantity/Quality Discrepancy to destination port during transportation:
In case of quality/quantity discrepancy to destination port in transportation, the buyer should file claim within 30 days after the arrival of the goods at port of destination. The seller will not be responsible for any discrepancy of the goods caused by shipping company and other transportation organization and/or post office.
b.Guarantee period and after-sales services: 13 months since date of bill of lading
During this guarantee period, the seller will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, the seller will provide the buyer spare parts at cost price.
c.Long-term service:
The seller will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.
FAQS:
1. Payment Terms
T/T, L/C at sight are acceptable by us.
2. Price Terms
It is up to your requirement. EX-WORS, FOB, CIF, CFR and so on are acceptable by us.
3. Delivery Time
25 working days from our accountant confirm your deposit payment.
4. Shipment Condition
We will arrange the machine production from our accountant confirm your deposit payment. The deposit is 30% of the contract. The balance should be paid up before loading machines.
5. Warranty
13 months quality guaranty for the main spare parts, not include quick-wears parts, like blade, punch, die and so on. If the parts of machines have problems, which are caused by its own quality, we will provide the accessories for free.
General View of machine
Mutiple Functions
Machine pictures
Work pieces
Hydraulic ironworker, ironworker, lathe, punching, cutting, notching, bending, machine, process, metal steel, plate cutting,
Angle cutting, plate bending, shearing, hydraulic ironworker machine, mechanical ironworker, ironworkers, iron worker, steel worker, metal worker, shearing machine, cutting machine, sheet metal punching machine, notching machine, guillotine machine, bending machine, press brake, c-channel bar cutting machine, H-beam cutting machine, angle bar cutting machine, dual hydraulic cylinders, single cylinder, punch and shear station, rolling machine, band saw, pipe punching, tube bending, pipe notching, machine tool.
